similar to: Load balance and big downloads

Hello Everyone, Hope everyone is doing well. First off I would like to say that Lartc has been an invaluable source of information for me, I was looking for a solution and a bit of google''ing found this wonderful HOW-TO. So now down to the Question: I have three Internet connections, (Soon to be four if I can get this working) ETH0 - 2mb/2mb ETH1 - 7mb/1mb ETH2 - 7mb/1mb I wish

Hello all, Yesterday I noticed that my system was "leaking" traffic towards the 10/8 network, I have shorewall installed on multiple machines ranging from single interface devices to ones with 10+ interfaces. I tested all the boxes and they are showing the same behavior. All systems are CentOS 3.4, 2.4.21-27.0.2.ELsmp. Shorewall version: 2.2.1 For the host mentioned is a single

Hello * community, I have 2 * boxes spanning a t1 with hdlc. I'm trying to route packets so people on a subnet seperate of the * boxes can browse the boxes on the * spanned subnet. The * boxes and the boxes on subnet controlled by * can see everything. The boxes on the seperate subnet inside the company can only see so far as the first * box and can't ping across the span.

Hi, Trying to implement a master user (1) for auditing purposes without luck. Ubuntu 18.04.3, canonical official repos only, no ppa nor self-compiled anything. From the log below I understand the master password succeeds but AD auth fails. I am pretty sure I missed something here. Also, notice the messages "Ignoring unknown passdb extra field: original_user". Log: Nov? 1 14:02:32

Hi I have a default route to 192.168.1.1 as soon as I start shorewall the default route dissapear. What do I need to do to have it not disappear. Kind Regards My network setup /etc/network/interfaces: # The primary network interface auto eth0 iface eth0 inet static address 192.168.1.17 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255

Hi all, Can some kind soul please help me find why this rule did not work, what's wrong? I am using dovecot 1:1.2.10-0xk1. ## Generated by RoundCube Webmail SieveRules Plugin ## require ["vacation","variables"]; set "subject" ""; if header :matches "subject" "*" { set "subject" "${1}"; } #

Hi, I am running dovecot 2.2.22-1ubuntu2.4 on a ubuntu 16.04 server. It has a valid Letsencrypt certificate but the problem also happens with a self-digned one. Only openssl s_client -connect localhost:993 works fine and fast, while all MUA's and telnet does not. Telnet timeouts waiting for banner after a minute or so: root at netuno:~# openssl s_client -connect localhost:993

> On May 29, 2017 at 9:27 PM Marcio Merlone <marcio.merlone at a1.ind.br> wrote: > > > Hi, > > I am running dovecot 2.2.22-1ubuntu2.4 on a ubuntu 16.04 server. It has > a valid Letsencrypt certificate but the problem also happens with a > self-digned one. > > Only openssl s_client -connect localhost:993 works fine and fast, while > all MUA's and

Hi. Days ago I sent a message to this list asking for help on a problem that seemed to me to be old: dovecot hangs and dovecot-auth posts log messages like: Nov 16 17:04:39 netuno dovecot: imap-login: Can't connect to auth server at default: Resource temporarily unavailable Nov 16 17:04:42 netuno dovecot: pop3-login: Can't connect to auth server at default: Resource temporarily

Marcio Merlone <marcio.merlone at a1.ind.br> writes: > Only openssl s_client -connect localhost:993 works fine and fast, while > all MUA's and telnet does not. Telnet timeouts waiting for banner after > a minute or so: > > root at netuno:~# openssl s_client -connect localhost:993 > ... > * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE > IDLE

Hi, I hope that someone could help me because I am a real newby in Samba and have a tons of questions about this apps. My first question is : how works samba when it act as a wins client (not server) ? I have 2 subnets in my company, the 205.205.247.0 is a windows segment with wins. the second one is 192.168.251.0 for the training classroom. The gateway where Samba is installed is used both as

i´ve been searching for a load balance solution since a month ago... what i can say is that it simply doesn´t work. I was unable to find one guy that did it with sucess. When "load balance" is the subject of the message on the list, the message is simply ignored. So... if it doesn´t work... why LARTC don´t delete it from the HOW TO and answer us with some "it simply doesn´t

Dear libvirt users, I'm stuck on this subject and would appreciate a working example as this looks a supported feature :) After many tries and packages backports, here is my current setup: qemu 2.5 libvirt 3.0 ceph hammer on Debian jessie. Here is the relevent domain xml parts: <disk type='network' device='disk' snapshot='internal'> <driver

Hi, The private adresses (192.168.254.0/255.255.255.0) of my network are sent dynamically by dhcp on my network. The dhcp server is on the firewall which address is 192.168.254.1/255.255.255.255 (this address is static). I''ve got a rsync server on this network which is on a separe server. His address is 192.168.254.200/255.255.255.255 (this address is static). I want that the users

On Fri, 25 Aug 2017 15:54:07 -0400 "samba.x.eliezer613--- via samba" <samba at lists.samba.org> wrote: > Hi, can't seem to login to Samba Server using notebook. OS is FreeBSD > 10.3. Samba Version is 4.6.6 > Connect to the remote Samba server using L2TP/IPSec connection. When > trying to login it's not accepting the correct credentials. > > When

I have a computer with two interfaces, say with addresses 192.168.1.1 and 192.168.1.2. I want to set up routing such that when I ping 192.168.1.1 it goes out through 192.168.1.2 and not to the local interface. Is this possible - all my attempts so far have been unsuccessful? If so, pointers, etc. would be gratefully appreciated. Jim -- Jim Redman (505) 662 5156 x85

On 12/04/2020 02:08, Barry Ralphs via samba wrote: > OK here's our setup, we're running pfSense as our firewall/router. We > have a dual-WAN with a Comcast Business Gateway and another local ISP. > We're running Samba 4.7.6 as the AD DC & Bind 9.9.4. Here's the issue, > we just upgraded our Comcast service to a higher speed & they replaced > the

We recently upgraded Samba on our DC from 4.7.6-0 to 4.11.9-3. Everything seems to be running fine over the last few weeks after the update. I'm now setting up a new computer & am having issues getting it to register with DNS. Windows shows that it has joined the domain. I can see the system in ADUC, but no A record in DNS Manager. I've run ipconfig /registerdns, but the event log

OK here's our setup, we're running pfSense as our firewall/router. We have a dual-WAN with a Comcast Business Gateway and another local ISP. We're running Samba 4.7.6 as the AD DC & Bind 9.9.4. Here's the issue, we just upgraded our Comcast service to a higher speed & they replaced the modem/gateway. Everything was working fine, before the modem swap. Once they did

Hi, I have tried to get my Win2K to access my Linux Samba server without success. The error message I am getting is "Network Path not found". Below are the details: 1. The Win2K is actually a guest OS running on VMWare-2.0.4. The host OS is a RedHat 7.2. VMware uses samba-2.0.6. 2. The config file was based on a working sample, off another VMWare machine. Its host OS was RedHat 7.2