similar to: Load Balance simply doesn´t work...

HI All , I am running a FC6 box with two internet links with load balance . Every thing is working fine expect the MSN connection that failed and reconnect every time and SSL connections . I would link to know if with the nona howto I could fix that . I have been tried with no success to redirect that connection only to one link but its look like do not work . Here my configuration :

Hi, this might be a dumb question, but I''m not finding much information online. I''m trying to setup a 2.6 linux box to run nat across multiple upstream links as a simple way to aggregate bandwidth. I found the instructions in lartc section 4.2 (http://lartc.org/howto/lartc.rpdb.multiple-links.html) fairly clear and straightforward. I implemented those, and a couple of trivial

Hi All, I''m a big user of the LARTC document but am currently stuck with a question around section 4.2 (http://lartc.org/howto/lartc.rpdb.multiple-links.html) in relation to "Routing for multiple uplinks/providers". I''m wanting to do a similar setup to the diagram where I have - lets just say for the moment - two uplink providers where I want to route over two

Hi. I´m making an script for load balancing of two cablemodems internet connections toward my LAN. The problem is that when I try to ''equalize'' the the two internet connections with the weight=1 it doesn´t work. On the other hand, if I put 5 and 5 it works, but not at 100%, it does intermittlently, some times works and others don´t. example: ip route add default equalize\

hi all, we were trying to configure our system with 2 ethernet catds connected to two different providers using iproute2 so that it recieves and transmits data from both of them. We have followed the configuration as given on lartc''s howto But the most wierd part of the story is that after we restart the system (We have put the script in rc.local) the system works fine and we can ping

Hello all, I have a linux router with 2 interfaces(eth0 - ISP and eth1 - LAN). I''ve established a VPN connection(openvpn) over eth0 with a friend of mine => tun0 interface. I want half of my LAN to have Internet access through the eth0 interface and the other half through the tun0 interface. I''ve set up a script like the "load balancing split access" instructions

I am setting to a shorewall system with 4 NIC''s as per the outline specification below. Can anyone please have a look and let me know what I have missed and what I have got wrong as I want to take this system live ASAP but do not want to kill internet access and the hosting for too long ! I have listed below the system outline & have attached the config files that I have changed, if

Hello Im having a problem similar to sawar Here is my configuration --------------eth1---192.168.1.128---------- -------------192.168.1.1 ISP router 1 | my | ---Eth0---192.168.10.157----| | | linux |

----- Original Message ----- From: "Jerry Vonau" <jvonau@shaw.ca> To: "Mailing List for Shorewall Users" <shorewall-users@lists.shorewall.net> Sent: Thursday, August 19, 2004 08:06 Subject: Re: [Shorewall-users] Two Links and DNAT > > > > Btw, by "shorewall show nat" I just noticed that I was doing snat only > > for packets comming

Hi guys, I''m not sure where to post for help on this one, shorewall or lvs, I''ll start with shorewall (only cause Tom is a gun at this stuff, and is polite enough to tell me to bugger off to the LVS list if I''m posting in the wrong one ;) I have a single box that is my router/firewall/LVS. Internet -- eth0 - router/firewall - eth1 --- internal lan | eth2

--------------eth0---80.48.56.70---------- -------------80.48.56.65 ISP | my | router1 | | | linux | | | router2 ------------eth1---192.168.200.10----- ----------------192.168.1.1 ISP I''ve two ip from my isp one public and one internal. ISP have two routers router1 is gw for public ip and router2 is gw for internal

Hi, Is there any tested good HTB script for traffic shaping available like as that of CBQ available at. http://freshmeat.net/projects/cbq.init I am n new bie and need to work on htb. -- Regards, M Arman _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

Hello, I am attempting to implement load balancing on a firewall to allow me to use two ISPs. I have followed the instructions in section 4.2 of the LARTC HOWTO but have got stuck on the split access section I have the options CONFIG_IP_ADVANCED_ROUTER and CONFIG_IP_MULTIPLE_TABLES in my kernel (2.4.24) and have added routes to the /etc/iproute2/rt_tables file but when I try a command in the

Hi All, I''ve configured a mutlipath as detailed in the HOWTO. For the most part it''s great, but when the cheap DSL line drops it''s connection, as it regularly does, the outbound routing doesn''t automatically use the remaining path for internal outbound traffic. Ip route show lists no default route once the default path dies, and if the ppp connection is

Hello folks: I am trying to set up a router machine to handle all my network connections to the internet and my local network. I have five interfaces in total, three to ISPs (two adsl and one cable) and two interfaces to my local network one to a switch and one wireless card. I have some of the routing working acceptibly but another portion I cannot get working not matter what I''ve

I have a script for dual internet connections that does this: ------------------------- #!/bin/bash IF1=eth1 IP1=203.219.190.106 P1=203.219.190.105 P1_NET=203.219.190.104 IF2=eth2 IP2=220.245.224.46 P2=220.245.224.45 P2_NET=220.245.224.44 IF0=eth0 P0_net=192.168.0.0 TABLE1=inet1 TABLE2=inet2 ip route add $P1_NET dev $IF1 src $IP1 table $TABLE1 ip route add default via $P1 table $TABLE1 ip

Hi! I had two uplinks till today. We stopped one of them today, so i thought i could share my experience. (it is maybe useful for somebody) I hadn''t managed to configure it using a LARTC howto, but the Nano-howto (http://www.ssi.bg/~ja/nano.txt) and julian''s kernel patches. I had some problems with icq connections, because it is a two step connection (It is just theory). 1.

Hello folks: This may have been discussed many times before but I have not been able to find it. I have also not been able to resolve it myself so I am asking here with hope that someone can straighten me out. I am using ip to do multisource policy routing or two connections to the internet. I have a linksys wrt54gs route which connects two machines by wire through the switch and three

Hello all, I need to put an IP alias to the same ethernet card, like this: eth0 - IP1/MASK1/BROADCAST1 eth0:1 - IP2/MASK2/BROADCAST2 In this box I will have another card that conects to a LAN netowork. I need this two alias in eth0 becouse I have two routes do take, but it seens to do not work. This is the script I am using (this scripts works fine when I have two ethernet cards

Hi. I´m making an script for load balancing of two cablemodems internet connections toward my LAN. The problem is that when I try to ''equalize'' the the two internet connections with the weight=1 it doesn´t work. On the other hand, if I put 5 and 5 it works, but not at 100%, it does intermittlently, some times works and others don´t. example: ip route add default equalize\