similar to: shaping marked packets

Hi, I have tried unsuccesfully to limit my ftp server send speed in linux. I have an ipcop linux firewall/router with 2 nics. 1 nic (eth1) is connected to a 3mbit/384Kbit cable connection and the other (eth0) a switch. Behind it i have a suse linux box and a windows box. On the suse box i run proftpd. I need to shape my passive ftp send speed to 34KBytes because if it is maxed out at 45K

>In theory yes, but it is shaping inbound transfers to my server. >YOu''re not doing any other sort of Ingress filters are you?? No >I dont care about destination port. That line was commented. BUT, incoming transfers are being shaped for some reason. >Could this be shaping on the ISP side?? What >happens when the tc rules >are shut off?? No, everything works fine

I am currently running the following script on an internal machine to shape outbound ftp and email traffic. I am trying to move the script to my nat router (ipcop with 2 nic cards) so that it shapes the whole network and not only the outbound of 1 box. I have cable modem -> ipcop (eth1) >(eth0 - 192.168.1.1) > 192.168.1.100 and 192.168.1.101. The scripts works great running on

Hi, I am currently using a script to shape my outbound ftp traffic. Works great except for 1 thing. When a user goes to list a dir, the listing is also getting shaped. This causes dir listings to be very slow. Is there a way to differentiate the dir listing packets? Here is a my current script: #!/bin/bash #shaping passive and active outbound ftp traffic on an internal computer without

>Theory is.. You can only shape outbound traffic. Inbound is via tcp windowshaping etc.. In theory yes, but it is shaping inbound transfers to my server. >> iptables -t mangle -A MYSHAPER-OUT -p tcp --sport 65437 -j MARK --set-mark 20 >> iptables -t mangle -A MYSHAPER-OUT -p tcp --sport 50000:51000 -j MARK --set-mark 20 >> iptables -t mangle -A MYSHAPER-OUT -m mark --mark 0

Hi, I am using the following script to limit my outbound traffic. This scipt runs on a box behind my firewall. It limits my outbound passive ftp traffic to 39K perfectly....just like i want. However, i just noticed that it is also limiting uploads coming to my server. Is there something I can change to make it not limit uploads to my server? #!/bin/bash #shaping passive ftp traffic # mark the

Well it appears i have no clue what im doing. I thought i had the below script working to shape outbound ftp traffic....however, it is shaping inbound traffic too. I have NO clue why. Please comment if anyone has any ideas why this doesnt work. I want to shape only outbound ftp traffic and not inbound or lan traffic. #!/bin/bash #shaping passive and active outbound ftp traffic on an

I am trying to mark outbound passive ftp traffic with iptables and shape it to 35KBytes. I am using the following script on the computer that runs the ftp server. It is not working correctly, it seems to limit ALL traffic. Cant file share or anything. Anyone might know what is wrong? #!/bin/bash #shaping passive ftp traffic # mark the outbound passive ftp packets on ports 50000-51000

Will the following rules work to mark and shape OUTBOUND ftp speed (passive ftp ports 50000-60000) on my linux server? I want to be able to run these commands on the actual computer that is running the ftp server. iptables -t mangle -N MYSHAPER-OUT iptables -t mangle -I POSTROUTING -o eth0 -j MYSHAPER-OUT iptables -t mangle -A MYSHAPER-OUT -p tcp --dport 50000:60000 -j MARK --set-mark 1 tc

Hi. I understand that device aliases (e.g. eth2:3) are not shapeable. Does anybody know if this functionality is planned in the future? Anyway, for the time being the only option that seems to leave is to fwmark packets differently for each device alias and then shape based on that. Is it possible to set multiple marks on the packets? Alternatively, is it possible to check for a specific

I am trying to mark outbound passive ftp traffic with iptables and shape it to 35KBytes. I am using the following script on the computer that runs the ftp server. It is not working correctly, it seems to limit ALL traffic. Cant file share or anything. Anyone might know what is wrong? It seems that I might need to add a ''lan limit'' so all traffic that is not marked still

In my attempt to move my traffic shaping to my router from an internal box, I have come up with a new set of rules. I would appreciate any feedback the list members might have. What I am trying to do is shape my outbound bandwidth so that my que doesn''t get full. I run a ftp server 24/7, do normal email, some ssh, web surfing and some downloading. I have a cable modem with 10mbit

Having study a number of documents on linux traffic shaper, I started to setup my shaping rules in my network. My linux box is running RH AS3 U3, shorewall 2.0.9. It is using PPPoE connected to the Internet firewall: eth0: connect to the adsl modem eth1: private net ppp0: virtual dial up interface for pppoe There is a ftp server on the private net It is listen for port 21 and configured

Hi, I am currently using the following script to shape traffic on my linux box. I am getting ready to move the script to my linux firewall box so it shapes traffic for my home lan. I am looking to refine my rules a bit so to make bandwidth sharing a bit more efficient. Specifically I am looking to give out bound email more priority so that when a large email is sent, I want it to borrow all

Hi, I wanna do some shaping on a DSL line that is plugged to the eth1 nic. Should I attach the qdiscs directly to the ppp device or can I use the eth1 device instead? What (and why) makes more sense? thx cb _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Greetings from a newbie! (Well, to this list anyway) I''m having a problem and I hope someone here might be able to help... I am strongly expecting an answer along the lines of "upgrade to v2.4.x", but I would REALLY preffer to avoid that for now... The setup: "Home brewed" v2.2.24 (will patch to v2.2.25 later today) with the DS8 patch applied. Currently

Ok, i think i found the problem. The script below seems to be working. I need to do some testing now. Thanks for all the help in here. If anyone has any enhancements, feel free to comment please. #!/bin/bash #shaping passive ftp traffic # mark the outbound passive ftp packets on ports 50000-51000 iptables -t mangle -D POSTROUTING -o eth0 -j MYSHAPER-OUT 2> /dev/null > /dev/null

Hello everyone... I have a little trouble and need some help :P How can I check on which interface the packet is going (eth0, eth1; I have two ISP and on eth3 little LAN), using to check it TC and IMQ? (HTB script) I tried to mark packets, but on chain POSTROUTING this does not work... Maybe because packets fall on IMQ before signing. I tried marking it on FORWARD but packets also

I wanted to post my new shaping rules which I am running on my IPCOP router. They seem to be working very well so far. Any comments to my setup would be appreciated. #!/bin/bash # clear out the chain and setup a new chain iptables -t mangle -D OUTPUT -o eth1 -j BW-OUT 2> /dev/null > /dev/null iptables -t mangle -F BW-OUT 2> /dev/null > /dev/null iptables -t mangle -X BW-OUT 2>

Hi, I am using the following script to limit my outbound traffic. This scipt runs on a box behind my firewall. It limits my outbound passive ftp traffic to 39K perfectly....just like i want. However, i just noticed that it is also limiting uploads coming to my server. Is there something I can change to make it not limit uploads to my server? #!/bin/bash #shaping passive ftp traffic #