similar to: Load Balancing

HI All , I am running a FC6 box with two internet links with load balance . Every thing is working fine expect the MSN connection that failed and reconnect every time and SSL connections . I would link to know if with the nona howto I could fix that . I have been tried with no success to redirect that connection only to one link but its look like do not work . Here my configuration :

Hi. I´m making an script for load balancing of two cablemodems internet connections toward my LAN. The problem is that when I try to ''equalize'' the the two internet connections with the weight=1 it doesn´t work. On the other hand, if I put 5 and 5 it works, but not at 100%, it does intermittlently, some times works and others don´t. example: ip route add default equalize\

Hi. I´m making an script for load balancing of two cablemodems internet connections toward my LAN. The problem is that when I try to ''equalize'' the the two internet connections with the weight=1 it doesn´t work. On the other hand, if I put 5 and 5 it works, but not at 100%, it does intermittlently, some times works and others don´t. example: ip route add default equalize\

I am setting to a shorewall system with 4 NIC''s as per the outline specification below. Can anyone please have a look and let me know what I have missed and what I have got wrong as I want to take this system live ASAP but do not want to kill internet access and the hosting for too long ! I have listed below the system outline & have attached the config files that I have changed, if

Hello folks: I am trying to set up a router machine to handle all my network connections to the internet and my local network. I have five interfaces in total, three to ISPs (two adsl and one cable) and two interfaces to my local network one to a switch and one wireless card. I have some of the routing working acceptibly but another portion I cannot get working not matter what I''ve

Hi! I had two uplinks till today. We stopped one of them today, so i thought i could share my experience. (it is maybe useful for somebody) I hadn''t managed to configure it using a LARTC howto, but the Nano-howto (http://www.ssi.bg/~ja/nano.txt) and julian''s kernel patches. I had some problems with icq connections, because it is a two step connection (It is just theory). 1.

I have a script for dual internet connections that does this: ------------------------- #!/bin/bash IF1=eth1 IP1=203.219.190.106 P1=203.219.190.105 P1_NET=203.219.190.104 IF2=eth2 IP2=220.245.224.46 P2=220.245.224.45 P2_NET=220.245.224.44 IF0=eth0 P0_net=192.168.0.0 TABLE1=inet1 TABLE2=inet2 ip route add $P1_NET dev $IF1 src $IP1 table $TABLE1 ip route add default via $P1 table $TABLE1 ip

Hi All, I am hoping someone can help me with a project I am doing at work. I warn you in advance that this will be a long post, but I wanted to provide as much information as I could to explain what was going on. Any help would be very much appreciated and welcomed as my boss would like to see this up and running this week. I have been scouring various documents on advanced routing for a

Hey, I''m trying to set up a Gentoo box to replace an aging BSD box here. The BSD box is running packet filter and I have it set up to take all data and route it to one of six sattelites. I have come up with the following config, but unfortunately I have no real way to test it short of switching the satellites over to the new system and prayer. The setup is: 192.168.252/22 - The LAN

Hi, this might be a dumb question, but I''m not finding much information online. I''m trying to setup a 2.6 linux box to run nat across multiple upstream links as a simple way to aggregate bandwidth. I found the instructions in lartc section 4.2 (http://lartc.org/howto/lartc.rpdb.multiple-links.html) fairly clear and straightforward. I implemented those, and a couple of trivial

Hi All, I''m a big user of the LARTC document but am currently stuck with a question around section 4.2 (http://lartc.org/howto/lartc.rpdb.multiple-links.html) in relation to "Routing for multiple uplinks/providers". I''m wanting to do a similar setup to the diagram where I have - lets just say for the moment - two uplink providers where I want to route over two

----- Original Message ----- From: "Jerry Vonau" <jvonau@shaw.ca> To: "Mailing List for Shorewall Users" <shorewall-users@lists.shorewall.net> Sent: Thursday, August 19, 2004 08:06 Subject: Re: [Shorewall-users] Two Links and DNAT > > > > Btw, by "shorewall show nat" I just noticed that I was doing snat only > > for packets comming

hi, i wann to make multigateway routing and i read ur how to on http://lartc.org/howto/lartc.rpdb.multiple-links.html and create some rules which i am sending u, but with this rules i am not able to do multigateway routing on my linux router so plz help me out. thanks the rules are given below IF0=eth0 IF1=eth1 IF2=eth2 IP1=192.168.1.2 IP2=61.246.243.86 P1=192.168.1.1 P2=61.246.243.81

hi all, we were trying to configure our system with 2 ethernet catds connected to two different providers using iproute2 so that it recieves and transmits data from both of them. We have followed the configuration as given on lartc''s howto But the most wierd part of the story is that after we restart the system (We have put the script in rc.local) the system works fine and we can ping

Hi, I''m building a network similar to that seen in 4.2 of the LARTC Howto. There is a diagram of this attached to this mail. Addendum to diagram: AlexRouter br0 = 192.168.58.1 eth0 = dhcpcd DaveRouter br0 = 192.168.58.2 eth0 = dhcpcd But we''ve run into some problems when actually implementing the routing for multiple uplinks. The difference between my

Hi, I''m building a network similar to that seen in 4.2 of the LARTC Howto. There is a diagram of this attached to this mail. Addendum to diagram: AlexRouter br0 = 192.168.58.1 eth0 = dhcpcd DaveRouter br0 = 192.168.58.2 eth0 = dhcpcd But we''ve run into some problems when actually implementing the routing for multiple uplinks. The difference between my

Hello all, I have a linux router with 2 interfaces(eth0 - ISP and eth1 - LAN). I''ve established a VPN connection(openvpn) over eth0 with a friend of mine => tun0 interface. I want half of my LAN to have Internet access through the eth0 interface and the other half through the tun0 interface. I''ve set up a script like the "load balancing split access" instructions

Hello Im having a problem similar to sawar Here is my configuration --------------eth1---192.168.1.128---------- -------------192.168.1.1 ISP router 1 | my | ---Eth0---192.168.10.157----| | | linux |

i´ve been searching for a load balance solution since a month ago... what i can say is that it simply doesn´t work. I was unable to find one guy that did it with sucess. When "load balance" is the subject of the message on the list, the message is simply ignored. So... if it doesn´t work... why LARTC don´t delete it from the HOW TO and answer us with some "it simply doesn´t

Hi All, I''ve configured a mutlipath as detailed in the HOWTO. For the most part it''s great, but when the cheap DSL line drops it''s connection, as it regularly does, the outbound routing doesn''t automatically use the remaining path for internal outbound traffic. Ip route show lists no default route once the default path dies, and if the ppp connection is