similar to: HTB classifying

//Just to not forget eth0 is WAN and eth1 is LAN . The box is NATing my lan. I configured tcng to shape both download and upload and i got connection loss again. Maybe it is my script fault or it is something bad with packets marking . this is how i mark outgoing packets iptables -t mangle -A MYSHAPER-OUT -p tcp -s 192.168.1.23 -j MARK --set-mark $ip and this part of my script which is intented

Hello good day to all ... this is my setup 1 Linux Wireless Access Point, connected are 4 wireless gateway in which i needed to apply shaping ... ok here is the weird part... clients on each gateway download files from the Acess Point ... a 500 mb file through ftp on gateway 1 which is up to 64 kbps ... the result is from 60-64 kbps speed which is fine ... on gateway 2 which is 128 kbps ... the

Dear All, I''m using the kernel 2.6.6, iproute2-2.4.7.20020116, iptables v1.2.9, and gentoo. I have a leased-line 64 kbps. I can see the counter works in iptables, but in the htb, it doesn''t go to the right class (it always go to the default class). Any help will be appreciated here''s my htb conf #!/bin/bash tc qdisc del dev eth1 root tc qdisc add dev eth1 root

Hi all! I''m trying to shape traffic in a dorm''s network (4 mbit symmetrical internet link, about 200 computers, heavy p2p usage). The router is a p4xeon running linux 2.6.9 with the qnet patches (http://kem.p.lodz.pl/~peter/qnet/). When I activate ip_forward I get >20% packet loss and a lot of duplicates. Any ideas? I attach my shaping script. Thank you very much in advance,

Hello, my linux show me that: server2 root # ip route add default scope global nexthop via 192.168.5.1 dev eth2 weight 1 nexthop via 192.168.160.1 dev eth0 weight 1 RTNETLINK answers: Invalid argument What can I do???? Thanks Matias --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.726 / Virus Database: 481 - Release Date:

----- Original Message ----- From: Michał Joachimiak To: lartc@mailman.ds9a.nl Sent: Tuesday, July 20, 2004 3:45 PM Subject: HTB - Really Big problem Hello everybody! Since week i dig lists and www and can''t find solution for my problem. I''m using HTB 3.13 kernel 2-4-25 smp iptables 1.2.9. I''ve got situation like this: LAN------Linux Box(routing only)------- Linux

Zviad O. Giorgadze wrote: > My ISP provides guarantied 115kbit bandwidth for GLOBAL TRAFFIC. During the low load period (early morning, evening, night) customers can get up to 1mbit traffic. That''s download traffic we''re talking about, since you seem to be shaping on your local LAN interface? Variable rate ISPs are tough to shape right, I guess... Does this 115kbit vs.

Hello, I''m trying to get my shaper to work, but have only a partial success. Can someone help me with that. My setup unfortunately is not so trivial, but I think some people could have similar one... 1. There is a router connected to the internet line via interface eth0 2. There are users connected to the router via two interfaces : eth1 and wlan0 3. All users are assigned private IP

I''ve set up Traffic Shaping on a Linux Router. Using HTB with SFQ, i''m trying to slow down heavy downloading for 20 subscribers over a 2048 kbit downlink. I''m classifying internet related traffic using iptables marking. bri0 is my local lan bridge, receiving egress traffic destined for subscribers. tc qdisc add dev bri0 root handle 1: htb default 2 tc class add dev

Hi, I have a rather simple problem I have to solve, well I thought it would be simple, I''ve run into a problem. I think I must be missing something fundamental. I am trying to build a Linux router that simply throttles everything down to certain bandwidths. That is, no priority queuing ...etc, just slow all traffic down to the specified rates, which are 64,128,256,512 kbit. We want

please, help, i have build vpn server (suse 9 + poptop), i have managed to implement tc htb in ip-up script, but every client has own ppp interface (ppp0, ppp1, ppp2...), and my idea is to share available bandwidth, not to limit connection, how to build root tc rule, when I have more then one interface?... please any one width experiance regards _______________________________________________

Hello, First of all, I already contacted Martin Devera, the developer of HTB, and he told me to search for help on this mailinglist, thus I am describing my problems here now... I am kind of seriously annoyed by QoS as I have been trying for over 3 years to get it working properly - first I did not understand how it works, then it seemed not to work, then it was working perfectly for half a

Hello all, I am with a doubt about QoS solution... I have a 4 Mbit backbone coming from the telco I use... This is the link I serve to my clients, so I make this classes: $TC qdisc add dev $DL root handle 1: htb default 60 CLASS="/sbin/tc class add dev $DL parent" $CLASS 1: classid 1:1 htb rate 4096Kbit $CLASS 1:1 classid 1:10 htb rate 256Kbit ceil 3072Kbit burst 15k $CLASS 1:1

Hi, good people! I wanted to limit my 4 customers to 144, 16, 32, and 32kbps. I used the following tc commands BUT IT FAILED TO LIMIT each and everyone of them to its bandwidth. What am I doing wrong: My tc scripts are: tc qdisc add dev eth1 root handle 1: htb default 1 #Classes# tc class add dev eth1 parent 1: classid 1:1 htb rate 9bps ceil 9bps #Default

Hello all, I have set my QoS solution and now I am facing a little problem... When I ping to my server it has some lost packages: Estatísticas do Ping para 172.30.0.1: Pacotes: SENDED = 1029, RETURNED = 880, LOST = 149 (14% de perda), Aproximar um número redondo de vezes em milissegundos: Mínimo = 0ms, Máximo = 686ms, Média = 105ms If I disable my QoS ping stats to be ok. I even have

Hi,lartc I used iproute-060110 with iptables1.3.4 on gentoo 2005r1 kernel 2.6.14-5. I find some error messages in system logfile: HTB: quantum of class 10001 is big. Consider r2q change. HTB: quantum of class 10010 is big. Consider r2q change. tcf_action_init_1: successfull police HTB: quantum of class 20001 is big. Consider r2q change. HTB: quantum of class 20020 is big. Consider

Hi, I have some interesting problem with htb , I set up root class and sub-classess: $TC qdisc add dev eth0 root handle 1: htb $TC class add dev eth0 parent 1: classid 1:1 htb rate 1990kbit ceil 2000kbit $TC class add dev eth0 parent 1:1 classid 1:10 htb rate 190kbit ceil 200kbit $TC class add dev eth0 parent 1:1 classid 1:11 htb rate 1400kbit ceil 1600kbit $TC class add dev eth0 parent 1:1

I have some problem with traffic shaping on debian testing. I actually posted a full config on the list a while ago but didn''t get any answers. The problem is that traffic doesn''t get into the user classes (~150) when I associate a class with a qdisc. I tried sfq, fifo but none works. If I dont''t associate a qdisc with a class classification occurs well.

Hello, I have begun to use the tc scripts since 2 weeks ago, so I am beginner. I am trying to divide my bandwidth in 4 independent ones. Each of these sub-bandwidths is assigned to 4 different groups of ip. Bandwidth sharing is allowed. I put a Linux with two Ethernet card between the router and the LAN. Eth1 is the card connected to the router and eth0 is the one connected to the LAN. My ISP

Hi everyone, My HTB script is showing me those "r2q change" warnings. I read that I should test with r2q values to gain accuracy and stop the warnings but I made some tests with r2q and with burst and I still get the warnings. Any ideas on this issue will be very helpful. The script seems to be working as the bandwidth for the IPs is being shaped. The NIC works at 100mbit and the