similar to: PPS

Has anyone had any major issues with the Cisco 7940 and or 7960 phones? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030818/2c156d1f/attachment.htm

I''m trying to fill a token bucket with enough tokens to burst several gigs of data. However, it doesn''t seem to get any higher than ~3.9GB: >tc qdisc add dev eth0 root tbf rate 1440kbit latency 50ms \ burst 16000000000 >tc qdisc show dev eth0 qdisc tbf 800b: rate 1440Kbit burst 3908420240b lat 2197.8s A smaller attempt of ~1.6 gigs works just fine: >tc qdisc

Hi all. This is my first msg in this list, and I´d appreciate any help you could give me. I already compiled the kernel with the options to run iproute2 tools. But, when I download the iproute2-2.4.7-now-ss010824.tar.gz file from ftp://ftp.inr.ac.ru/ip-routing/ and try to compile it, I got too many errors. Here goes the output: server:/home/nathan/iproute2# make make[1]: Entering

Hello, list members, can i limit pps rate with linux? How? -m limit does not fit, as i understood: it can help with low rates only (is that true? any suggestions?) Thank you, -- _,-=._ /|_/| `-.} `=._,.-=-._., @ @._, `._ _,-. ) _,.-'' ` G.m-"^m`m'' Dmytro O. Redchuk

hi, does someone tried bridge and or router functionality of linux kernel on multiprocessor system. Does multiprocessor system increase network performance or give ability to process higher traffic.. What about highest possible troughput someone have achieved ? etc.. tia _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl

Hi I''ve patched net-mrtg http://www.net-snmp.org/ with http://x-ray.prokon.cz/data/snmp/ sucefully Also I''ve copied QOS.TXT to /usr/local/share/snmp/mibs when I make a normal use of snmp, with mrtg in order to monitor all traffic on eth0 and eth1, it works OK. But, how must I do in order to get monitor for a specific class ? If I make a snmpwalk (like README suggest), I get

Dear All, Would you guy have any advices concerning how to get some data like queue length, pkt size, and so forth, from the running queue. Right now, I modified the queue disc to print out some info I want using printk() and use syslogd to catch those info up. The problem is, in burst, syslogd can''t catch all the msg the queue sent out. Are there any standard or better way to

Hi, How can I set equal bandwidth of 512kbit downlink and 256kbit uplink for every single IP address of 254 IP addresses I have in my LAN? Regards, ro0ot

Hi, Sorry to bother you all. I have a typical problem sharing DSL upstream bandwidth with users. I have 3 types of traffic high-priority, medium-priority and low priority. My upstream rate is 960kbits. Traffic (any priority) can vary in bandwidth from 0 to 960kbits. I have a test setup where I can pump 600kbit of high priority sustained and I have 400kbit of low priority traffic sustained. I

Folks, I am a little bit confuse in how to put these packets into correct mangle table for traffic shaping. This is what i ve planned to do: - - - - :eth0 [ LINUX-BOX ] eth1: - - - - Let say: eth0: 220.100.1.1 eth1: 192.168.1.1 eth1:1 192.168.1.2 192.168.1.0/24 get natted into 220.100.1.1 before reaching the internet. I put every packets coming from internet (eth0) this way: # iptables -t

Hi all, I am having some fun with traffic shaping, and have run into an interesting situation. Here is South Africa, most internet links are heavily oversubscribed, which means that in most cases the local link is _not_ the bottleneck, and shaping on the local link does not help that much... Does anybody have some tips on shaping such links? How can you get interractive traffic if you

Hi, I am after a feel of the throughput capabilities for TC and Iptables in comparison to dedicated hardware. I have heard talk about 1Gb+ throughput with minimal performance impact using 50ish TC rules and 100+ Iptables rules. Is there anyone here running large throughput / large configurations, and if so, what sort of figures? Regards Dan

Hi all, Is there a way to create a class that limits the amount of packets of any rule in a period ( like pps ) ? Some aplications like game servers, send so much little udp packets to the clients that the router cpu gets exausted, even with relative low bandwidith usage. Any idea ? Luciano _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl

Hello, I would like to buy a SIP IP phone, but I don't know wich one to choose... Can you tell me wich IP Phone is known to work with Asterisk please. I've seen the Cisco 7940, but I don't know if it works, and how expensive is it ? I'm french, so if you know some french resellers, tell me. Thanks a lot, ---------------------- Fabrice Tereszkiewicz Sawadka.org

Hi I believe that whole question is in topic. Is there any way to recognize ( and then shape ) p2p traffic which is encrypted? Modern p2p clients have this ability moreover some of them have this enabled by default. Now I''m using ipp2p for iptables but as I know this doesn''t recognize encrypted traffic. Thanks in advance. Pozdrawiam Szymon Turkiewicz

Hi, I am trying to relate the lended and borrowed statistics to the others and, in particular, compare them with the assigned rates for each class. My understanding is that the lended and borrowed stats are expressed as a number of packets but over what time period do the numbers refer? In addition, for a particular class why do the lended and borrowed figures add up to the sent value? That

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello! I have a problem with a duplicate route entry, when using a pre-installed route and automatic take-over by the "heartbeat" daemon, which adds an address and the kernel adds an route automatically. Maybe anyone has an explanation... > ip addr 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue inet 127.0.0.1/8 scope host lo

I am planning to replace our cisco 7200 core router with Linux. We currently serve around 1500 (3/4 DSL - different router) customers with probably half of them being concurrent at any given time. We have a fiber network and customers currently aren''t managed as far as how much bandwidth they can use at anytime. Therefore I have constructed a working tc qdisc Linux router as a test. It

Make sure you are using G.711a, G.711u or GSM codecs.. I have not been able to get iLBC to work and someone the other days couuld not get SPX working.. You will need to enable/disable the codecs in X-Lite.. If you also want to control the codecs that * uses then put the following in the general section of your sip.conf disallow=all allow=alaw allow=ulaw allow=gsm Hope that helps.. > Hi,