similar to: tcng/tc setup

Hi, I wanted to configure the following : 1. VPN + some other special connections (TCP 82,8282,23,22 and ICMP) to have priority over the rest 2. special upstream for our updating system on port 4000 3. within the VPN tunnels citrix traffic ( TCP 1494, 2598) + icmp has priority I need this for both incoming and outgoing traffic as it is the bandwith managment config on a central system from

Hi all, I have read the larc howto and I need to apply a traffic shaper with this configuration: router / two interface etho and eth1 lan lan is on eth1 and on eth0 I''ve the dsl connection (1.2 Mbit / 256 kbit) I need to limit the bandwith towards lan and I''ve thought at HTB and tcng. I write the script belove. I want limit the p2p and ftp (ssh and irc) connection at 15

Newbie here... tcng version 10b I''m just learning about htb and using tcng. I am trying to make the example in Martin A. Brown''s Traffic Control with tcng and HTB HOWTO v0.5 example 2 /* * Simply commented example of a tcng traffic control file. * * Martin A. Brown <mabrown@securepipe.com> * * Example: Using class selection path. * * (If you are reading the

Hi I''m completely stuck with the tcng language - I assume there must be some way to arrange queues hierachically like eth1 | TBF | PRIO / \ class class but my attempt (below) produces a "inferno.tc:8: qdisc "tbf" has no classes near "prio"" when run through tcc. dev eth1 { egress { tbf (rate 128kbps, burst 64kb,

Hey all, i have a class. class ( <$call1> ) if ip_dst == 10.100.1.6 && tcp_dport == 22 if ip_src == 10.100.1.4 && tcp_sport == 22 ; Now when i apply this traffic TO 6 on port 22 is indeed limited to the speed i specify BUT it doesn''t seem to take the src into account at all. If i change the src to anything, even an address that

I can''t seem to match packets less than 512 bytes: class( <$bulk> ) if tcp_dport == 81 && !( ip_len & 0xfe00 ) ; or if tcp_dport == 81 && ip_len < 512 Both rules match any packet I send to port 81, even when the total IP length is much greater than 512 bytes: class htb 2:4 parent 2:1 leaf 5: prio 1 rate 8000bps ceil 24000bps burst 6Kb cburst 1839b Sent

Thank you for your help. It generates this script : tc qdisc add dev eth0 handle 1:0 root htb default 2 tc class add dev eth0 parent 1:0 classid 1:1 htb rate 75000bps ceil \ 75000bps tc class add dev eth0 parent 1:0 classid 1:2 htb rate 125000bps tc filter add dev eth0 parent 1:0 protocol all prio 1 u32 match u32 \ 0xa000001 0xffffffff at 12 classid 1:1 But I thought it was necessary to

Hi, I try to shape my incoming traffic. I have 2MBit/s DSL bandwith and the following ruleset (on the internal interface): $INT="eth1"; $INT_NET=192.168.1.0; $MAX_IN=2Mbps; dev $INT { egress { class (<$int>) if ip_src:24 == $INT_NET; class (<$ssh>) if tcp_sport == PORT_SSH; class (<$smtp>) if tcp_sport == PORT_SMTP; class (<$http>) if

Hello mailing list, i stand bevor a mystery and cannot explain it J. I want to do shaping and prioritization and I have done these following configurations and simulations. I can´t explain, that the combination of PRIO and TBF is much better than the HTB (with the prio parameter) alone or in combination with the SFQ. Here are my example configurations: 2 Traffic Classes http (80 = 0x50) and

I''ve been having a bit of difficulty with a hierarchy of HTBs that I''m wanting to create. Essentially, I''ve got one interface that goes to both the DMZ and the internet. When going to the internet, some of the traffic will be going through a VPN and therefore I want to prioritize it differently, however I want to give the DMZ traffic full speed as long as it

My previous message (http://mailman.ds9a.nl/pipermail/lartc/2004q2/012285.html) didn''t generate any replies, so I thought I''d try posting what I''ve done trying to solve my own problem, in hopes that someone will take pity and show me if/where I''m going wrong. Just to recap, I''m trying to accomplish this on my server, which streams RealAudio files

Hello Mailing list, I have a problem with the prio qdisc and I don´t know what is wrong in my configuration This ist a sample configuration and looks like this: #include "fields.tc" #include "ports.tc" #define X16(i) i i i i i i i i i i i i i i i i dev ppp0 { dsmark { prio(bands 6, priomap X16($be)) { class if ip_proto == IPPROTO_UDP;

hi, i´am new in tcc (tcng). i try to define my qos for VoIP-Services. For this i wantto define a class for a port range 10000 till 15000. how is the right way? this down works: class (<$voip>) if tcp_sport => 10000 || tcp_sport <= 10000 ; are there any examples of real installations - maybe including VoIP, HTTP and P2P services? regards thorsten gehrig

Hey, I currently have a box serving as a firewall (running iptables) and packet shaper (using tc / tcng''s tcc compiler) to shape a large amount of inbound and outbound traffic to my data center. Whilst I can perform shaping functions using HTB, I need to also provide an absolute (to the nearest few 100kb/s) bandwidth usage maximum. As an example I might have 200MBit/sec

Hi, We are using kernel 2.4.24, tcng version 10b. I''m trying to do some policing in the ingress queue of the internet device. Until now we had configured some filters dividing traffic into queues, and on these queues the Double Leaky bucket meter was applied. The idea is to have a minimum of bandwidth assigned per class (the cir values) and a maximum (pir values), just as with the

I''m trying to setup a bottlekneck scenario so I can see the effects of the RED qdisc on a congested interface. My example simulation code is at the bottom of this email if someone wants to see it. The following is a snippet form TCSIMs output. 0.602000 E : 0x80bc080 40 : inputB_eth0: 45000028 00000000 40060000 ... 0.602000 D : 0x80bc080 40 : inputB_eth0: 45000028 00000000 40060000 ...

I''d like to set up a filter based on a port range. I tried something like class( <$test> ) if tcp_sport > 2001 && tcp_sport < 2015 ; But it seems to ''hang'' with this in there.. Is this the best/right way to go about this? if not, what is the best way? Thanks _______________________________________________ LARTC mailing list /

Hello all, I am trying to set up a simple htb based system, where packets with source ip 10.0.0.1 should have their own class. I plan to use tcng to set it up easier. Is there something wrong in my tcng file ? ~/tcng$ cat htb /* */ #include "fields.tc" #include "ports.tc" dev eth0 { htb ( ) { class ( rate 600kbps, ceil 600kbps ) {

Hi, I am new to traffic control in linux. However, i have able to grab many new knowledge in recent days. I find tcng somewhat easy to use (although lack proper doc. of its usage). I want to control traffic of several IP Addresses connected to my LANSIDE. What I want is , i want to separate certain bandwidth to all my clients. dev "etho" { htb() { class ( rate 400kbps, ceil

Hey people, I have the following tcng configuration: #include "fields.tc" #include "ports.tc" dev "eth0" { egress { // Voice traffic class (<$voice>) if udp_dport >= 20000 && udp_dport <= 23000; // SSH connections class (<$interactive>) if tcp_dport == PORT_SSH; //