similar to: HFSC simple curves configuration

Hi I''m moving to hfcs (mostly succesfuly:) ), but I''ve encountered a strange problem: When I download something from this server using wget (one thread) via an idle uplink, I get no more than 130 kbit/s, and when I''m using prozilla (or start more wgets), I get about 200 kbit, but still it''s not all the link can do (240) - the rest remamins unused. Is this

Hello, I’ve read this Article avout VOIP and HFSC http://automatthias.wordpress.com/2006/06/30/hfsc-and-voip/ I’ve got few questions ? Considering this tc class add dev $DEV parent 1:1 classid 1:2 hfsc \ rt m1 ${UPLINK}kbit d 50ms m2 $[1*$UPLINK/10]kbit \ ls m1 ${UPLINK}kbit d 50ms m2 $[3*$UPLINK/10]kbit \ ul rate ${UPLINK}kbit rt = realtime curve ls = linksharing curve but m1 = ? m2 = ? d =

I stumbled upon a problem while upgrading Ubuntu 13.04, Shorewall version from 4.4.26.1 to 4.5.16.1. Everything was working fine before, after upgrading the script wouldn''t start. First some config files. tcdevices: #INTERFACE IN-BANDWIDTH OUT-BANDWIDTH OPTIONS REDIRECTED eth1 - 6300kbit hfsc,classify ifb0 - 6300kbit hfsc

now i''m read a lot of knowledge paper about traffic control in linux because now i''m try to develop and research about traffic shaper so can everybody tell me about my topic ... Is it can do for real???? my topic is " now, many organization use traffic shaper for control traffic and bandwidth because don''t want something example some mac address, ip address,

now i''m read a lot of knowledge paper about traffic control in linux because now i''m try to develop and research about traffic shaper so can everybody tell me about my topic ... Is it can do for real???? my topic is " now, many organization use traffic shaper for control traffic and bandwidth because don''t want something example some mac address, ip address,

1. HFSC have 4 curve such sc, rc, ls, ul and 1.1 In leaf class can specify rc for guarantee service (bandwidth and delay) and If want to sharing fairness exceess service, we must specify ls and ul curve too (ls curve with paramater m2 specify at lease sharing bandwidth in that class will receive and ul curve mean maximum bandwidth in that class will receive) so i''m doubt .. about if i

Hi all, my IMQ device works OK (thanks to Andy Furniss), but now I''ve problems to attach the traffic in the qdisc''s. This is my conf: ----------------------------------------------------------------------- INET | |eth0 300Kbps ROUTER (NAT) |eth1 | LAN ----------------------------------------------------------------------- MAX=300 tc qdisc add dev imq0 root handle 1: htb

I''m using HFSC to limit bandwidth for our wireless customers. However, I''d also like the bandwidth prioritized based on packet type. This is what I''m trying right now, and I''d just like some input from anyone out there knowledgeable in this on whether it does what I want it to do: Eth1 -> HFSC ........|-> HFSC (User1) (Min 512 Kb, Max 1024 Kb, Burst 1536

Hi, I''ve read ADSL-Bandwidth-Management-HOWTO http://www.tldp.org/HOWTO/ADSL-Bandwidth-Management-HOWTO/implementation.htm l#AEN166 and I''ve a doubt from script: [ ... ] # DNS name resolution (small packets) iptables -t mangle -A MYSHAPER-OUT -p udp -j MARK --set-mark 21 [ ... ] That is a bug ? I think that " DNS name resolution (small packets) " is better

Hey Andreas, how i catch this traffic using L7 filter?, i´ve installed l7 filter now, but i don´t kwnow to use the kind of filter...!!! Can you help me? Thx.- Terraja-based 2007/4/29, lartc-request@mailman.ds9a.nl <lartc-request@mailman.ds9a.nl>: > > Send LARTC mailing list submissions to > lartc@mailman.ds9a.nl > > To subscribe or unsubscribe via the World

Hi! Do you know somthing about hfsc and bps? There''s no output for speed only for packets. Doesn''t hfsc support such a field? tc -s class show dev eth0 class hfsc 1: root Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) rate 0bit 0pps backlog 0b 0p requeues 0 period 0 level 2 class hfsc 1:11 parent 1:1 sc m1 0bit d 18.0ms m2 1000Kbit ul m1 0bit d 0us m2

Why am I getting giants on imq0? How do I stop that? ========== imq0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 UP RUNNING NOARP MTU:1500 Metric:1 RX packets:39880312 errors:0 dropped:0 overruns:0 frame:0 TX packets:39878715 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1024 RX

Hello, I just found the great howto and started shaping my internet connection. The howto''s last update is a liitle in the past now so I have some questions about how things are done the best way nowadays ;-) To ensure a stable and low latency voip communication I added an HFSC qdisc to device ppp0 (1 Mbit SDSL). There are two classes (by now): One for SIP and RTP and one for the

Hi I have the following problem: I''ve created qos script which shapes traffic on outgoing interface eth1. More - less it looks like this : ------------------------CUT------------------------------------------------------ #root qdisc and class for eth1 $tc qdisc add dev eth1 root handle 1:0 htb default 19 $tc class add dev eth1 parent 1:0 classid 1:1 htp ratel ${CEIL_UP}kbit ceil

Hello, this is my first post here and it is about the behavior of a HFSC class with a two piece-wise linear service curve. My goal is to separate audio streams from bulk traffic. To keep it simple a use two classes one high priority realtime and the other for the rest. Example: tc qdisc add dev ppp0 root handle 1: hfsc default 11 tc class add dev ppp0 parent 1: classid 1:1 hfsc rt m1 400kbit d

hi list, i''m about to setup traffic shaping on a server and got some small questions about the setup. i read alot of docs/howto''s but there are still some questions i''d like to ask. setup on the box is: - external if is ppp0 (dsl) - internal if in eth0 (with ~15 nat''ed boxes) - openvpn at tun1 since all ppl on the lan feel like they have to use p2p i decided

I have a lot question about tc-command because now i''m doing research to compare performance between HTB and  HFSC so i''m doubt a lot thing and your reply are so very helpful to me ... My question is In HTB tc command question 1. I''m use opensource (Mastershaper) for help to config traffic control but when i''m try to config HTB, I''m doubt about

hi all, long time since i posted on the list. just wondering if anybody has played around with hfsc and if so could he/she share their info on it thanks adrian -- To mess up a Linux box, you need to work at it; to mess up your Windows box, you just need to work on it. _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl

Hello list, I am now using hfsc for QOS. I have something like this: tc qdisc add dev ethx root handle 1: hfsc default 9 tc class add dev ethx parent 1: classid 1:1 hfsc ls m2 70mbit ul m2 70mbit tc class add dev ethx parent 1:1 classid 1:9 hfsc ls m2 7mbit #DNS stuff follows tc class add dev ethx parent 1:1 classid 1:2 hfsc rt m1 12mbit d 1ms m2 1mbit #Half-life tc class add dev ethx parent

hi, I would like to use the HFSC scheduler for my QoS. I''ve 4 class and 2 of them need to control the bandwidth and the latencies so I think I must use HFSC. So I read some doc ( http://del.icio.us/tag/hfsc ) but its not very clear. I make some tests with differents parameters but I''m not able to use correctly this scheduler: $TC qdisc add dev $dev root handle 1: hfsc default 40