similar to: Layer 7 netfilter not working

Hi there, I have a little problem. I had this some months ago but didn''t solve it back then. I have patched my kernel with Layer 7 support and patched my iptables to support it, too. Now I inserted this line in my firewall script on my router for testing purpose: $IPTABLES -t mangle -A POSTROUTING -o $INET_IFACE -p tcp -m layer7 --l7proto http -j DROP It works, BUT only if the

Hello, I''ve been trying to shape the bittorrent traffic (on my external interface, upload), but without luck, for this I''m using layer7 filter right now, but I''ve also tried ipp2p, with the same results, I might say that this is not a problem with this packet classifiers, the problem is with HTB, here''s why. When I open azureus (the bittorrent client I

Hi all, I am running Slackware 10.1 with Kernel 2.6.14.3 includes iptables 1.3.4 with layer 7 My network diagram below: - INTERNET --- LINUX_ROUTER_FW --- PCs Below is my simple iptables script: - echo 1 > /proc/sys/net/ipv4/ip_forward iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE iptables -t mangle -A POSTROUTING -m layer7 --l7proto applejuice -j MARK --set-mark 1 iptables -t

Hello every one! I''m making a project to a discipline in the university and the project is make a Linux router that grants QoS to Multimedia connections (the prof. say we can use Open Source Soft. :) or reinvent the wheel). I have been googeling and googeling and i found the l7-filter in source forge and the spectacular simple language that is TCNG. Well the problem is how can i

i search a lot forum how to get bandwidth statistic such number of packet, total byte in each application protocol by using IPTABLES + netfilter-layer7 but i don''t know which script for getting it in log file and use data after get it for plotting graph later my IPTABLES command like this iptables -t mangle -N all iptables -t mangle -A POSTROUTING -j all iptables -t mangle -A

Hi, I have simple question about Skype. What are the methods of selecting packets which belongs to Skype?? I know about 7layer but I don''t belive that is only way. Is 7layer realy good and stable solution for routers which must handle more than 1000 users ? Thanks in advance Pozdrawiam Szymon Turkiewicz

Hi All , My first message and I have a little problem with my FC6 box trying to block emule traffic using layer7 . Here my network : Internet --------- ADSL Router ------------------- FC6 Box -------------------- Emule Box external ADSL : Dynamic Internal ADSL : 192.168.254.1 external FC6 : 192.168.254.3 internal FC6 : 192.168.253.1 Emule Box : 192.168.253.3 I guess that everything

Hello I''ve setuped a QOS bridge under debian 3.1 using 2.6.18.3 kernel + iptables 1.3.6 I''ve patched the kernel an Iptables with esfq+layer7 without problems. This simple script doesn''t log nothing ... And I''m sure to have eMule traffic (I''ve checked with tcpdump ) If I remove " -m layer7 --l7proto edonkey \" line I can see

Hi iam running FEDORA, i have installed Source of iptable 1.2.9 with the patch layer7-iptables patch done with out any errors and i applied patch in kernel to the layer 7 patch and i have select the required option by doing make menyconfig done make dep make bzImage make modules make modules_install make install and rebooted with customer kernel when i type iptables -t mangle -A

HI All , I am running a FC6 box with two internet links with load balance . Every thing is working fine expect the MSN connection that failed and reconnect every time and SSL connections . I would link to know if with the nona howto I could fix that . I have been tried with no success to redirect that connection only to one link but its look like do not work . Here my configuration :

Hi all! I''m trying to shape traffic in a dorm''s network (4 mbit symmetrical internet link, about 200 computers, heavy p2p usage). The router is a p4xeon running linux 2.6.9 with the qnet patches (http://kem.p.lodz.pl/~peter/qnet/). When I activate ip_forward I get >20% packet loss and a lot of duplicates. Any ideas? I attach my shaping script. Thank you very much in advance,

Hello, its me again, I won''t stop sending emails to this list, until I solve this problem, I''ve tried several apps to create the right htb rules (even made them my self), but I always get the same results, traffic gets shaped, but I can''t use my bandwidth, and this is weird, because I should be able to, also I keep seeing download being limited too, and that

As seen on my post at: http://www.sveasoft.com/modules/phpBB2/viewtopic.php?p=28112#28112 This works very well... It does NOT work with stable 4.0! sveasoft will be issuing a bug fix for this (4.1) in the near future. Final Rev of working script w/ asterisk support I'm not going to run alchemy on production machines until it is stablish. Remember to set your uplink properly and to set

Hi, can anybody comment on the cost of matching with IPP2P vs. Layer7. Also, does a iptables rule with more complicated matching mechanism also slow down processing if all the packets are matched before they reach the rule. I.e. is the mere existence of a potentially costly rule already slowing down processing or only if packets are actually processed by it? Thanks very much in advance.

Hello I am looking for a way to have snort to dynamically update my shorewall config. I have seen software out there but I would like to see if anyone had tried this first. Aslo I would like to know if there is a way clear the Netfilter tables when I do a shorewall restart. The reason being is that when I make a change to my firewall setting I want all connections to have to re-establish

I had been using L7-Filter[1] successfully for edonkey/eMule traffic until recently. I upgraded to the latest release of mldonkey, 2.5.28a, which implements eMule compatibility, and with support for Kademlia[2] enabled, network latency increases greatly. [1] http://l7-filter.sourceforge.net/ [2] http://www.infoanarchy.org/wiki/wiki.pl?Kademlia Has anyone created a new pattern match for

hi everybody. im trying to set up an QoS config, using layer7 (http://l7-filter.sourceforge.net/) for protocol detection. im suposing 3 clients with this configuration: 3 clients: 1.2.3.1 , 1.2.3.2 , 1.2.3.3 1.2.3.1 has 256kbit bandwidth "guaranteed" clients 1.2.3.2 and 1.2.3.3 has 256kbit bandwith so im marking every packet using layer7 iptables module, classifying them in three

re I would like to do some firewalling and p2p shaping/limiting on one of the vlans in my network and I was thinking of using linux box as transparent bridged firewall/limiter. For this I''m planning to use AMD64 2.2Ghz box with 2 1gbit NIC (Broadcom 5721), that will be bridged. The box must be totally transparent and unseen in the network, as well as it should have much influence on

Hi, I''m a complete newbie at this traffic shaping / QoS stuff so please excuse me if this is a silly question. I''ve searched and searched on Google and I just end up confusing myself even more, so I thought I''d post my question to this list and see whether someone can help me! Basically, I am running a Linux box as a NAT router on my home network (machine name marvin).

Hello all, I am trying to make a filter into my QoS rules and I founded that when I try to use filters u32 and with fwmark they do not work together. This is the filter I use, just and example, for u32: $TC filter add dev $DL parent 1:0 protocol ip prio 1 u32 match ip sport 22 0xffff flowid 1:10 This is working fine. Now if I try to mark a package that I want it to go to the same