similar to: Help with dual internet connection

Below is a snippet from my firewall script isp1_ip="xx.0.5.20" isp1_gw="xx.0.5.1" isp1_net="xx.0.5.0/28" isp1_if="eth2" isp2_ip="xx.182.19.88" isp2_gw="xx.182.19.1" isp2_net="xx.182.19.0/28" isp2_if="eth3" lo_ip="127.0.0.1" lo_if="lo" lo_net="127.0.0.1/8"

Below is a snippet from my firewall script isp1_ip="xx.0.5.20" isp1_gw="xx.0.5.1" isp1_net="xx.0.5.0/28" isp1_if="eth2" isp2_ip="xx.182.19.88" isp2_gw="xx.182.19.1" isp2_net="xx.182.19.0/28" isp2_if="eth3" lo_ip="127.0.0.1" lo_if="lo" lo_net="127.0.0.1/8" ip rule delete

I have a firewall with 3 interfaces DMZ, INTERNET, LAN. Does anyone have an example script to do QOS on multiple intefaces using htb? Gareth Segree mailto:Gareth.Segree@gleanerjm.com <mailto:Gareth.Segree@gleanerjm.com> Technical Support Analyst The Gleaner Company Ltd. 7 North Street Kingston Tel: 922-3400

hi all, i have this situation: isp1 | dmz ----- FW linux ----- isp2 |----------------------------------- vpn concentrator ----- various ipsec lan-2-lan | LAN In lan i have "pc zone" and "server zone", same network. Dmz and server zone browse internet through isp1, lan use isp2, and remote

Hi all I have been working with Shorewall connected to two ISPs lately, and I would like to suggest a couple of improvements to the MultiISP.html documentation page. I followed the examples in that page (but the legacy setup and the USE_DEFAULT_RT one), but I had problems with locally (by the firewall) generated packets: I wanted them to go out using only one ISP, but if I use a tcrules rule to

I''ve been using the wondershaper 1.1 with much success. My problem is that I want to guarantee bandwidth to mail/VPN & web surfing and make sure that I don''t break the existing script. If not how do I make sure that I can guarantee bandwidth for mail, VPN & web surfing without hurting ftp uploads. Thanks

Hello: I have a series of newspaper articles from a Canadian newspaper database (Canadian Newsstand) that look just like below. I've read through this vignette (http://cran.r-project.org/web/packages/tm/vignettes/extensions.pdf) about creating a custom reader to extract meta-data, but I can't understand how to apply this in the context of a text document, rather than in the tabular format

Hi all, I have managed to setup a Fedora 7 box with 3 ethernet cards and two ADSL modem/routers from different suppliers as LARTC recommends. I am able to direct traffic for specific internal IPs either to one or the other ADSL line. However, I am faced with two problems I am struggling for the solution: 1. I have opened a few ports on the ADSL router/firewalls to talk to internal hosts; say when

Hello! I have set up a LINUX router with two seperate uplinks to do load balancing. I made all the configuration after the "NANO-HOWTO to use more than one independent Internet connection" document. I patched my 2.4.24 kernel with patches, described in this document. My configuration is: --------------------------------------------------------------- #!/bin/bash

Hello, it seems I am hit by http://shorewall.net/MultiISP.html#Local : "Experience has shown that in some cases, problems occur with applications running on the firewall itself. This is especially true when you have specified routefilter on your external interfaces in /etc/shorewall/interfaces (see above). When this happens, it is suggested that you have the application use specific local IP

Hi, according to: http://www.iana.org/assignments/ipv4-address-space the bogons table is outdated... tha attached patch fixes that... (done against 2.0.1) -- Regards Thomas PS. please CC me as I''m not subscribed to the list -------------- next part -------------- --- usr/share/shorewall/bogons.old 2004-04-19 18:28:00.000000000 +0300 +++ usr/share/shorewall/bogons 2004-04-20

Hi Samba community, Last year we upgraded from version 3.0.10 to 3.0.20b and at the same time switch from NT-domain controller membership to AD membership. After this upgrade we began to experience that drives sometimes were not mapped. We saw this both on our Citrix servers and on our XP PCs. A couple of weeks back we then moved to 3.0.21b in the hope that this misbehaviour would

Hello all, Yesterday I noticed that my system was "leaking" traffic towards the 10/8 network, I have shorewall installed on multiple machines ranging from single interface devices to ones with 10+ interfaces. I tested all the boxes and they are showing the same behavior. All systems are CentOS 3.4, 2.4.21-27.0.2.ELsmp. Shorewall version: 2.2.1 For the host mentioned is a single

Hello All, I am trying to implement OpenVPN on Fedora core Linux 3 with the latest pathces installed. This server is used only as firewall/internet gateway/proxy/VPN server, with kernel 2.6.1-1.27.FC3 and kernel 2.6.1-1.27.FC3 SMP It has two NIC''s eth0 (10.0.0.150) connected to ADSL, eth1 (192.168.3.12) connected to the local network. I use shorewall 2.4 on this machine. I like to test

Hi folks, Has anyone tested the changes to multiple ISPs/load balancing or routestopped in 2.4.0-RC1 yet? We need to talk about what criteria we will use for determining whether 2.4.0 is ready for release. I''ve started configuring a firewall at work with the multiple ISPs support, but its kernel doesn''t have connection marking support, so it''s going to be a couple of

Hello All, I have a question about setting up the shorewall firewall for squid, I followed the instructions on "Using Shorewall with Squid" --> "Squid Running in the DMZ" section. For some reason I am unable to get the program to work. I am able to have the squid work properly by using squidclient program, but once I setup the firewall to use the redirect I am unable to