similar to: Shaping over multiple outgoing interfaces

Hi Guys, Here is a question that is probably of concern to many of us. I am under pressure to provide some solution for ingress traffic shaping. What my customer demands is to divide the downstream (ingress) of an ADSL lines to two classes of traffic - important traffic and non important downloads. He has a very reasonable requirement: he wants a guarantee of at least 1000kbps at all times for

Hello, After reading the excellent HOWTO I got traffic shaping working nicely over ethernet devices on a test setup. I can''t put this setup live though, because our main firewall has three 2mbit hdlc interfaces instead of a single device. We are using multipath routing using iproute2 nexthop at the moment, and that works fine for firewalling. But now I have a need for shaping and

Hi! I answer to two messages from this thread (I use digest). lartc-request@mailman.ds9a.nl wrote: > > Message: 3 > Date: Fri, 16 Jul 2004 10:51:37 -0700 (PDT) > From: ibro tj <ibb_linux@yahoo.com> > Subject: Re: [LARTC] QoS for Voip. > To: lartc@mailman.ds9a.nl, alessandro.ren@opservices.com.br > > Hi, > > the hint from Martin A Brown which I am

Hi, Many of traffic shaper products provide shaping based on certain application type. How can we implement shaping of recognized application types? Like FTP can take only 64Kbps irrelevant of weather FTP Server is running on port 21 or 4096. Thanks for your suggestions. -- Sumit _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl

Dear list, I have experimented some time now with HTB queues, and have received a lot of help from this list, especially from Stef. Thank you. My currect Shaper looks like this: http://www.designobjekt.de/test/rc.trafficshaper Unfortunately I still experience lags of this type: -players from the internet playing on my server feel lags -I feel lags when I play on a different server on the

Will the following rules work to mark and shape OUTBOUND ftp speed (passive ftp ports 50000-60000) on my linux server? I want to be able to run these commands on the actual computer that is running the ftp server. iptables -t mangle -N MYSHAPER-OUT iptables -t mangle -I POSTROUTING -o eth0 -j MYSHAPER-OUT iptables -t mangle -A MYSHAPER-OUT -p tcp --dport 50000:60000 -j MARK --set-mark 1 tc

Hi Stef, Reffering to page < http://www.docum.org/stef.coene/qos/faq/cache/7.html > I found a para as follows, " CBQ is not always as accurate as it should be. See docum.org on the test page for some tests with bounded classes. The algorithm used by cbq is very "link sensitive". It calculates the link idle time and for that it needs the real link bandwidth, average

Hi ! I´ve been using the wonderful wondershaper from chapter 15.8 of the LARTC Howto for some time. It´s really wonderful. Actually, I use the version from http://freshmeat.net/projects/wshaper/?topic_id=87 Now I tried to put some hosts to low priority, and it doesn´t work. The traffic is splitted equally between the noprio and the other hosts. Is this because I use ip masquerading, and all

Hi! I have configured traffic shaping with htb and imq but when i am downloading the latency for example on the Bnet class is very high ..... example: 65 kb/s download best latency: 56ms lateny on bnet class while downloading: 400 350 250 350 400 100 300 200 80 200 300 250 ..... To get informations about latency i am marking ping packets with iptables. I want to play during other users

LS, Spent a lot of this weekend reading about shaping and traffic control. The Howto is very extensive... :-) I hope to use this list to see if what I want is possible. The situation: - A central (big) Citrix cluster located in Frankfurt (all servers in one subnet) - The office in Rotterdam connected to Franfurt with a 2Mbit line - The office in Bergen (Norway) connected to *Rotterdam* with a

Dear folks, Here goes my bandwidth manager: INTERNET | |eth0 202.14.41.1 BW.Manager | | | +----eth1----192.168.1.0/24 | +------eth2----192.168.2.0/24 Total incoming bandwidth to eth0 is 1024kbps should be shared to eth1 and eth2, which mean each get 512Kbps and burstable to 1024Kbps if other host is idle. My question is how do i apply HTB to these situation ? As far as i know eth1 and eth2

Hi guys, I''m new to TC HTB traffic shaping.... I installed it at my first try on my Bearing Leaf Router/Firewall I use the tc -s class show dev eth? To see my output All looks dandy and nice, but it''s figures, of which at current momment looks like French to me, I would like to see exactly what these figures looks like in a GRAPH style... I know I can use MRTG, I do have

how can I configure for shaping bandwith using cbq/htb without delay or latency?

I have been reading lartc.org for the past few days and am a bit overwhelemed by the possibilities and configurations that are possible. I am still trying to process all of this to try and understand what I need to do in my configuration, and have tried a few things to no avail. I currently have a webserver that is completely flooding our link, so I need to find a way to deal with this quickly.

Hi all and tc Gururs i have patched the IMQ and htb to kernel, but when i do egress filtering, iam not able to see any traffic and excusted the following the commands modprobe imq numdevs=1 tc qdisc add dev imq0 handle 1: root htb default 1 tc class add dev imq0 parent 1: classid 1:1 htb rate 100kbit tc qdisc add dev imq0 parent 1:1 handle 10: htb default 1 tc class add dev imq0 parent

This is a long message. Please use a monospace font :) I''m trying to shape the traffic between my LAN and the Internet. My link is an ADSL 512/128 line. The network is shaped like this: LAN GATEWAY ROUTER ------------------ ------------- ------------ | 192.168.0.1/16 | <----> | 192.168.0.1 | <----> | 10.0.0.138

Hello list. I have been trying to figure this out on my own, but I guess I somewhat failed :) A linux router with external eth0 and internal eth1 acts as a gateway for a number of machines utilizing a partial T1 line (512kbps). Since the T1 is limited by hardware and by its nature to 64kbps per channel the most I can pump out of it is up+down < 512kbps. If a number of workstations amount to

HTB and imq was used to control traffic. AC="tc class add dev eth0 parent" $AC 1: classid 1:1 htb rate 100kbps burst 2k $AC 1:2 classid 1:10 htb rate 50kbps ceil 100kbps burst 2k prio 1 $AC 1:2 classid 1:11 htb rate 50kbps ceil 100kbps burst 2k prio 1 please tell me the range of "prio" _________________________________________________________ Do You Yahoo!? 新鲜到底,娱乐到家 -

How to do ensure a class not lended and not borrowed each other. I do cburst burst 0b ,but ctokens tokens go to negative! --------------------------------- Do You Yahoo!? "更多惊喜，同样精彩，NetVista A30 热卖" --0-611462377-1048485942=:33792 Content-Type: text/html; charset=gb2312 Content-Transfer-Encoding: 8bit <P>How to do ensure a class not lended and not borrowed each

Hello.. I have a linux box and I want to make priority on traffic generated by my LAN''s computers.. I don''t have a guaranted bandwidth, so I wanna use sfq... I want to make traffic to port 80 , 443 , 25 & 110 PRIORITY 1 Traffic src or dest 192.168.0.2 to make priority 2 And the rest to put it in proiority 3.. I did the following : tc qdisc add dev eth0 root handle 1: