similar to: jdg-qos-script on FC3

how can I configure for shaping bandwith using cbq/htb without delay or latency?

Hi, all..... There is anyone can give me example configuration IMQ to minimize delay or latency. Thank''s Avdianto _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

hi all! i have a dsl connection with 1280 kbps for downstream and 256 kbps for upstream, and i want to manage the bandwidth to give high priority to voip traffic and low priority to p2p traffic. i found the script jdg-qos. i readed on this forum (i have a dsl-g604t router with MCMCC firmware) http://www.dslreports.com/forum/remark,16250220 that the two parameters of the jdg-qos script (DWIFLIMIT

I posted earlier when I noticed that htb was releasing packets in pairs, even though my burst/quantums were 1 pkt. To fix I set HTB_HYSTERESIS 0 in net/sched/sch_htb.c . This gives a noticable gain in upstream worst case latency, for me with 256kbit/s up I used to see +90 sometimes, now it''s +45. For the many who have 128 up it should limit them to +90 rather than +180. Andy.

I''ve rebuilt my old P-II/233 with Debian Sarge and it is now serving as my main firewall. It is running a home-built 2.6.9 kernel with the ipsec-netfilter and policy match patches. -Tom -- Tom Eastep \ Nothing is foolproof to a sufficiently talented fool Shoreline, \ http://shorewall.net Washington USA \ teastep@shorewall.net PGP Public Key \

Where can I find examples of configs to emulate WANs, I am looking for slow speeds and high latencies. Thanks

I''m playing with the rather excellent QOS script from Alexander Clouter at http://digriz.org.uk/jdg-qos-script/ So far I am really impressed with it - a very impressive example of the power of linux QOS rules (has pretty much everything in it from the LARTC Howto!) However, the instructions hint that "for QoS to affect locally generated traffic in a non ethernet bridge setup

So after reading the traffic control documentation at shorewall.net I am a little confused. I don''t understand how to use the tcrules file. What I would ideally like to do is setup htb on a per user basis (either by IP or MAC address). If anybody has any hints on the best way to do this or is willing to explain the use of tcrules file a little better (how I could mark it per IP or MAC)

SME Server 6.0.1 as standalone (Domain controler, mail & file server) samba version 2.2.8a I have a win95 machine on my network logged onto the domain with it's d drive shared with full access and no password. On server-manager I have setup a hostname for this machine based on mac address so that the DHCP server gives it the same IP every time. I have created a directory /mnt/win I can

Dear all, I''ve installed Xen 3.0.1 on my laptop and dom0 is boot normaly execpt it''s could not using X, i haven''t trying to boot guest OS. my laptop configuration is Toshiba Portege R150 with Debian Sarge on it. And then I installed same version of Xen into our server with Debian Sarge and Kernel 2.4. Booting dom0 is not success , xen always trying look dor NFS root and

Hi All, I''m using shorewall on my laptop(2 NIC) to connect my desktop to the Internal LAN. For some reason, MS''s SQL query analyser is not able to connect to the SQL server. I alway get the "Server does not exist" I even tried to connect to it using IP address rather than netbios name and it still doesn''t work. All of the access is fine. (eg: WEB/ping etc)

This is one of my test classes: class htb 1:10 parent 1:1 prio 0 quantum 2048 rate 160Kbit ceil 400Kbit burst 1803b/8 mpu 0b cburst 2111b/8 mpu 0b level 0 Q1: where does "level 0" stand for? Q2: where does this b/8 stand for? Q3: this is on a i386 platform, so timer resolution should be 10mS. According to the doc the minimal burst should be 10mS*160Kbit=1600. Why is it 1803? Q4: I

Hi all, Is there any way to automatically update the samba password when a user changes his unix account password using the passwd command. I want samba to look in passwd file for authentication. I dont want to create two accounts one for local unix and then for the samba. I am not planning to deploy ldap as a solution. Is there any workaround. Anish

Hi all, this is really not really very easy to understand, or, to get in. Well, I''ve the following configuration on the router box: LAN - interface: eth0 - network: 192.168.2.5/24 - bandwidth: 100Mbit/s INET interface - interface: ppp0 - network: .dynamic.ip./0 - bandwidth: DOWN=1536kbit/s and UP=256kbit/s the LAN interface is to serve 6 other clients with internet and

>In theory yes, but it is shaping inbound transfers to my server. >YOu''re not doing any other sort of Ingress filters are you?? No >I dont care about destination port. That line was commented. BUT, incoming transfers are being shaped for some reason. >Could this be shaping on the ISP side?? What >happens when the tc rules >are shut off?? No, everything works fine

Hi. I wrote in a reply to a mail on here recently that you can''t set mpu (minimum packet unit) on HTB as you can on CBQ. I''ve just noticed that there is a patch on devik''s site which does mpu and overhead. http://luxik.cdi.cz/~devik/qos/htb/ For dsl users mpu is, for practical purposes going to be 106 - overhead is still variable though, depending on packet size.

Hello, I am trying wondershaper-1.1a on a friend''s pppoe connection on her Linux box. There are a few things I don''t understand. 1. She has pppoe connection so should DEV=eth0 or DEV=ppp0 ? 2. Her ISP just says on her payment bill that the speed is 128kbps, but doesn''t mention any downlink/uplink speed, so in that case what should be, DOWNLINK= and UPLINK= ? 3. She

Hi, The problem is that if I set the default route with two gateways, with the command ''ip route change default scope global nexthop via $P1 dev $IF1 weight 1 nexthop via $P1 dev $IF1 weight 1, in the linux router I have no problem working with internet but the NATTED clients can''t access. I have iptables configured with masquerade option. What I forget to do? Thanks and

HI all, Im kind of new to this Bandwidth Management thing. I want to ask if this is the right mailing list for me to ask questions regarding TC for bandwidth shapping? Thanks. Grace

Is there a port of this code availble for testing purposes? Thanks john@zavgren.com