similar to: interface polling ... the click router

Hi, I have a mini router that have this feature, "clone MAC address" My ISP doesn''t allow me to connect more than one computer. But, with the "clone MAC address" of the mini router, I can connect up to 5 computers, and my ISP can''t notice that. What do I need to do this "clonning" with my linux box? Thanks, Nico

I have 2 linux boxes connected to a switch: box1: eth0 192.168.0.200/255.255.255.0 eth1 public address from ISP dhcp box2: eth0 192.168.0.35/255.255.255.0 box3: eth0 192.168.1.3/255.255.255.0 I want box1 to act as a gateway to the internet (it is doing this now for box2), but also want to communicate from box2 to box3 through box1, and that box3 can use the internet through box1. how can I do

I want to provide internet to home users with 256 Kbps and I have a 3 Mbps dedicated internet connection. Do you think It''s ok to split the 3 Mbps in 480 users? Thanks, -- Nicolas _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

I hope this isn''t too far off topic. I did a little bit of pricing homework a few months ago on new T1 cards. The idea was to build a Linux based router/firewall. After all, Ethernet NICs are easily available for less than $10 today. But all the T1 cards I found cost a fortune. And about a year ago, I learned the list price for a complete Adtran Netvanta 3200 router with T1 card is

Hello, Could someone experienced suggest good solution for failover advanced router ? The router for which I need redundancy is quite complex: 1) has 5 interfaces 2) uses the same network and the other network IP aliases on some interfaces 3) uses bunch of policy routing rules 4) uses proxyarp feature on some interfaces 5) uses complex iptables setup [propably not important in this

Hi, I am want to setup linux box as router with fallback routing. ISP 1 (Cable Modem, Static public IP) ISP 2 (ADLS Router Dynamic IP SUA NAT on router) ISP 1 ISP2 | | | Dyn IP (SUA NAT) | DLS router Cable Modem | (Static IP) | (192.168.1.1 | | | | eth1

Hi all I need to use three 512 kbps aDSL internet connections, in a load-sharing, link-failover scenario. Presently I am using Ipcop with a single DSL. Now, I seem to have two options...one..an Edimax quad wan port adsl router, with firewalling and NAT and second install a minimal linux distro for routing...something on the lines of LARTC....and keep NATTING, IDS & Firewalling on the linux

VPN (IP x.x.150.3) VPN (IP x.x.150.3) | | | | Cable Link DSL Link (IP y.y.y.y) (ppp0 z.z.z.z) | | | | Netopia R9100 Linux Router (IP x.x.125.1) (eth0 x.x.125.3) | | |

Hi there, I have a little problem. I had this some months ago but didn''t solve it back then. I have patched my kernel with Layer 7 support and patched my iptables to support it, too. Now I inserted this line in my firewall script on my router for testing purpose: $IPTABLES -t mangle -A POSTROUTING -o $INET_IFACE -p tcp -m layer7 --l7proto http -j DROP It works, BUT only if the

Hi all, I want to apply traffic control using TCNG 1.30 on a NAT router. Can I use the IP addresses on my LAN to shape the traffic on the outgoing interface, with other words, does the address translation take place before or after traffic control? (Or does it depend and if so, on what?) Groeten, Joost Kraaijeveld Askesis B.V. Molukkenstraat 14 6524NB Nijmegen tel: 024-3888063 / 06-51855277

Hello Every One! I need some advices with a problem i have. I''m working in a room from a department where the connection to the Internet is given by a NAT router and the IPs are given by a DHCP server. There are no firewall in the department so i''m trying to make a Firewall and a traffic shaper for all the PCs in my room. Because i don''t have access to the DHCP

Hi all, We want linux (ubuntu) with 2.6 kernel to act as multicast router and to pass multicast packets between different subnets. And linux machine as router has two network cards having two different subnets assigned onto. We first worked "sysctl -w net.ipv4.ip_forward=1" line on linux shell that made linux to work as unicast router. (like host, the multicast packets were discarded at

Hi, I''m setting up a router (linux, debian-sarge), which shall relay dhcp requests from all subnets to a central DHCP server. The general stuff is solved, i.e. I can ping from any connected machine to any other including the NICs of the router itself. All firewall tables (including nat and mangle) are set to ACCEPT and flushed. On my model system I have the NIC 172.16.1.121 (eth1),

Hi All, In a scenario, where a LAN is being provided internet connectivity through multiple ISPs terminated at a Load Balanced Multihomed Linux Router as described in LARTC HowTo, how would the traffic distribution affected if there is a squid based transparent proxy for the LAN''s web traffic on the same system (i.e. the load balanced router itself). The recent squid versions have

hi, does someone tried bridge and or router functionality of linux kernel on multiprocessor system. Does multiprocessor system increase network performance or give ability to process higher traffic.. What about highest possible troughput someone have achieved ? etc.. tia _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl

When using redhat8 as routers to forward short udp packets(40 bytes length),I found 40 % of all packets has been dropped by the router. Iperf is used to generate the UDP traffic. Any information about this? Thanks a lot! H _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Hi all, I have this Fedora 7 system with 3 ethernet cards, eth0 servicing the local network, eth1 connected to ISP1 and eth2 connected to ISP2. I''m only using ip routing and my ip tables are currently empty. no other firewall seems to be running - unless I''m not aware of it. I have managed to use the connection to ISP1 for all internet connection, but failed to use ISP2 at all!

Dear lartc''s members I am a new linux user and I was configured a linux router with cbq.init I have installed a VoIP gateway with one voice port (fxs) for a commun telephone and one ethernet port for the LAN navigation and a ethernet port for wan interfaz, i.e., the gateway do NAT. The gateway has a públic IP at the wan interface and a private IP at the Lan interface. I do''nt

Hi you all, I''m working on outbound load-balancing between multiple (actually 2) ISPs. Examples given in docs/articles are perfectly working, but I would like to go a bit further. My idea would be to have a "cheap" LinkProof (from Radwar) box, and the major difference between this box and a Linux solution is that a LinkProof can be installed without changing the IP addressing.

Hello, I have a problem with my GNU/Linux router. I mean, I am trying to configure a VPN conection for the clients of the LAN and allow to connect them to the Internet trought the router. I have installed in the server a QoS policy and I have configured the firewall for allowing all the clients to connect. I attach the script. The idea is that when a client connect this pc the dhcp gives him an