similar to: Minimize delay on IMQ

how can I configure for shaping bandwith using cbq/htb without delay or latency?

Hello, Has anyone had any luck compiling Alexander''s QOS script on a vanilla FC3 or FC2 box? I just cant seem to get the darn thing to port right. Regards, Bryan _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Hi Guys, Here is a question that is probably of concern to many of us. I am under pressure to provide some solution for ingress traffic shaping. What my customer demands is to divide the downstream (ingress) of an ADSL lines to two classes of traffic - important traffic and non important downloads. He has a very reasonable requirement: he wants a guarantee of at least 1000kbps at all times for

Hi all and tc Gururs i have patched the IMQ and htb to kernel, but when i do egress filtering, iam not able to see any traffic and excusted the following the commands modprobe imq numdevs=1 tc qdisc add dev imq0 handle 1: root htb default 1 tc class add dev imq0 parent 1: classid 1:1 htb rate 100kbit tc qdisc add dev imq0 parent 1:1 handle 10: htb default 1 tc class add dev imq0 parent

Hi stef; imq patch of 2.2.17 form http://luxik.cdi.cz/~devik/qos/imq.htm diff against 2.2.17 Can you tell me how imq work with ipchains? thanks for your help regards, haipe _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

hi stef oone more pb while shaping incoming traffic with imq .this one tc qdisc add dev imq0 root handle 1: htb default 20 tc class add dev imq0 parent 1: classid 1:1 htb rate 2mbit burst 15k tc class add dev imq0 parent 1:1 classid 1:10 htb rate 1mbit tc class add dev imq0 parent 1:1 classid 1:20 htb rate 1mbit tc qdisc add dev imq0 parent 1:10 handle 10: pfifo tc qdisc add dev imq0 parent

Todays quick question: Ive had problems with imq and getting my setup to work as planned. Im thinking that a better solution for shaping incoming traffic would be to put a little limit in the outer interface of the router box with ingress, and the shape traffic on the inner interface with htb. Would that be better than using imq? -- Patrick Petersen <lartc@schmakk.dk>

Hi, All! I have kernel panic with using IMQ on my linux router. In archive of this mailing list i found reason of this truble: i used PREROUTING -j IMQ and POSTROUTING -j IMQ in one time but i don''t understand why this configuration is broken? I want to control all traffic on my external interface, for example i want to lease 30kbit/sec (inbound+outbound, without dividing) for encrypting

HTB and imq was used to control traffic. modprobe imq numdevs=3 but only imq0 and imq1 can be used; if there are five NICs, please tell me how can I can use imq2 , imq3 and so on. _________________________________________________________ Do You Yahoo!? 新鲜到底,娱乐到家 - 雅虎推出免费娱乐电子周报! http://cn.ent.yahoo.com/newsletter/index.html _______________________________________________ LARTC mailing list /

Hi! I have configured traffic shaping with htb and imq but when i am downloading the latency for example on the Bnet class is very high ..... example: 65 kb/s download best latency: 56ms lateny on bnet class while downloading: 400 350 250 350 400 100 300 200 80 200 300 250 ..... To get informations about latency i am marking ping packets with iptables. I want to play during other users

HTB and imq was used to control traffic. AC="tc class add dev eth0 parent" $AC 1: classid 1:1 htb rate 100kbps burst 2k $AC 1:2 classid 1:10 htb rate 50kbps ceil 100kbps burst 2k prio 1 $AC 1:2 classid 1:11 htb rate 50kbps ceil 100kbps burst 2k prio 1 please tell me the range of "prio" _________________________________________________________ Do You Yahoo!? 新鲜到底,娱乐到家 -

Hello, After reading the excellent HOWTO I got traffic shaping working nicely over ethernet devices on a test setup. I can''t put this setup live though, because our main firewall has three 2mbit hdlc interfaces instead of a single device. We are using multipath routing using iproute2 nexthop at the moment, and that works fine for firewalling. But now I have a need for shaping and

Hello.. I have a linux box and I want to make priority on traffic generated by my LAN''s computers.. I don''t have a guaranted bandwidth, so I wanna use sfq... I want to make traffic to port 80 , 443 , 25 & 110 PRIORITY 1 Traffic src or dest 192.168.0.2 to make priority 2 And the rest to put it in proiority 3.. I did the following : tc qdisc add dev eth0 root handle 1:

How to do ensure a class not lended and not borrowed each other. I do cburst burst 0b ,but ctokens tokens go to negative! --------------------------------- Do You Yahoo!? "更多惊喜，同样精彩，NetVista A30 热卖" --0-611462377-1048485942=:33792 Content-Type: text/html; charset=gb2312 Content-Transfer-Encoding: 8bit <P>How to do ensure a class not lended and not borrowed each

Dear All, Sorry to trouble again..... After go through www.lartc.org I have implemented the HTB instead of CBQ for the same scenario. Now following files are under /etc/sysconfig/htb directory. eth0 DEFAULT=30 R2Q=10 eth0-2.root RATE=256kbps BURST=25k eth0-2:10.comp1 RATE=120kbps BURST=12k PRIO=0 LEAF=sfq RULE=192.168.200.0/24 eth0-2:20.comp2

Hi ! I have a single host which is connected via an 512kbit ADSL link to the n= et. I quite often use some realaudio application that uses some bandwidth = and I want to avoid other traffic to scale that bandwidth down. So I used = some classes (with htb) on imq0 device and applied some filters and it see= ms to work in most cases. However, there are some sites with which downloa= d is

Hi all, It is my understanding that with HTB, the rate and the ceiling are divided over the elements of the class. E.g. using a rate of 100 kb and a ceiling of 2000 kb for a class with 10 elements on a 100Mb NIC, the effect of the ceiling will be that if all elements are generating their maximimum possible trafic they will be effectively limited to ~ ceiling / number of elements, in this case

Hi, All, Does anyone have working scripts using HTB for QoS but IPtables for filtering? I want to learn how to put them together. Do the scripts working on Redhat? Thanks in advance, James

www:/usr/src/iproute2 # make -v GNU Make version 3.79.1, by Richard Stallman and Roland McGrath. Built for i686-pc-linux-gnu Copyright (C) 1988, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 2000 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Report bugs to

Hello there, Having made quite a lot of expensive mistakes i have finally clobbered together a script for the users on my network. Have a look at it and please suggest as to how can i limit bandwidth to each ip on this network to about 64Kbits. Trevor -- ( >- GNU/LINUX, It''s all about CHOICE -< ) /~\ __ trevor@clovertechnologies.com __ /~\ | \) / Pre Sales