similar to: same gw / load balancing

Hi I want to use two dsl (or more) lines to increase my internet bandwidth. Our dsl lines are dhcp serviced. Both of them provide the same Def GW and different IPs for each ethernet interface (same subnet). ¿Is it possible to balance outgoing traffic "using" the interface as a criteria? No point on choosing gateway by IP. ¿Could someone give me a clue on how to deal with this? (first

Hi all Does anyone know if i can use ethernet aliases like eth0:1 in advanced routing like multipath routing in order to avoid to have nxEthernet interfaces in my Linux box. Thansk in advanced -- Guillermo Gomez <ggomez@neotechgw.net> neotech _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO:

Hi I''m newbie on this and i would appreciate some pointers on how to limit the http trafic to my users from my linux-gateway box. Thanx in advance -- Guillermo Gomez <ggomez@neotechgw.net> neotech _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Hi all, I''m trying to put a linux GW running with this seput: Internet -> DSL Modem -> VLAN2 \ eth2.2 Linux > Lan eth2.3

Hello, I''m new to the list and iproute2 itself. I was searching for a way to simultaneously use several IPs on the *same network interface* for outbound traffic. Let me explain: I have eth0 interface to which I set 2 IP addresses; 192.168.0.1 and 192.168.0.2. Then I want to connect to Internet through 192.168.0.254 gateway using round-robin between those 2 addresses. The iproute2

Hello all, I have a linux machine with a SIP server (Asterisk) and 2 WAN interfaces (NATed) configured to do load balancing. I experienced problems with the SIP/RTP protocols and load balancing, because when initiating a call to an external SIP Host, a new RTP flow starts from the server to the Host, that sometimes uses another default route (due to the nexthop configuration). As i have two

Hi guys, Can you take a look at this? :) +-----------+ | | eth1-|- | | -|-eth0---LAN--- | | eth2-|- | | | +-----------+ - eth0 is connected to the LAN having the IP=LAN_IP eth1 is connected to the first ISP having IP=ISP_IP_1 and GW=ISP_GW_1 eth2 is connected to the second ISP having IP=ISP_IP_2 and GW=ISP_GW_2 I need

Hi, I am connected to two DSL providers (DSL 1 - 1Mbps downlink/384kbps uplink and DSL 2 - 2Mbps downlink/512kpbs uplink) I would like to only allow ftp, pop3 and http via the DSL 1 and only smtp, ipsec and pptp via DSL 2. How can I do so? Can I use iproute to route these protocols? Below is my ip routing: - # DSL 1 ip route add 2.2.2.208/30 dev eth0 src 2.2.2.210 table 1 ip route add

Sorry for the long descritpion of the problem, I''d like to know If I misunderstand something or if I meet an intrinsic limit of my setup. 217.58.51.162 HDSL eth1 - SRV_XP: 192.168.254.10 eth0: 192.168.254.1 -----+------------------+------- 81.121.243.250 ADSL eth3 - I want to allow incoming pptp request (port 1723) to be forwarded to srv_xp

--------------eth0---80.48.56.70---------- -------------80.48.56.65 ISP | my | router1 | | | linux | | | router2 ------------eth1---192.168.200.10----- ----------------192.168.1.1 ISP I''ve two ip from my isp one public and one internal. ISP have two routers router1 is gw for public ip and router2 is gw for internal

Weird behaviour. A couple of days ago I installed another DSL router. During the process I have somehow caused the default gw route to disappear - on system start up the interface comes up fine, I can see and connect to the local subnet but not to the internet. [rkampen at timsws network-scripts]$ route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref

Hello, I''m trying to set up a gateway for a local network to use two dsl lines. Ok, I read the LARTC howto and set up two routing tables and the correct balancing default gw. It works fine for connections originating locally on the gw machine. Then I added two iptables rules on the nat table: iptables -t nat -A POSTROUTING -s 192.168.4.0/24 -o $TI_IF -j SNAT --to-source $TI_IP iptables

Hello, shaping seems to be a hot topic at this list. I hope nobody will be bored with my silly routing problem. What happens if there is a route to a network via two interfaces? From the NAG2: ,----- |While both routes match the destination, one of the routes has a larger |netmask than the other. [...] The larger a netmask is, the more |specifically a target address is matched; when routing

Hello, I have finished setting up the load balancer with IPROUTE ... also patch the kernel to support DGD and now it''s working fine with the valuable guide at LARTC website, Julian Anastasov, and the kind people in this mailing list. Now I would like to launch a web server and a ftp server to the public but I''m stuck into a problem and really need your help. Currently internal

If SIP channel driver needs to connect to a remote GW over a dedicated SIP trunk BUT the remote GW has a 'standby' in case of failure, how can the sip configuration file be configured for the remote GW when there are actually two IP addresses. If the main remote GW fails control automatically switches to the standby GW, so how could the SIP configuration file hande this switch and support

I''ll take it from the begining... About one year ago I only had 1 IP and used wondershaper. It worked great. Now I got /27 (32 IPs) and a gw computer that talks to two ISPs via a two tunnels. See: http://www.flashdance.cx/pics/flashdance-LAN.png I _really_ have a need to do QoS on my connection, for example I host websites that uses all available upstream. When I download at the same

The hack below is for OpenH323, not Asterisk. This is not an Asterisk problem AFAICT. I am posting it here so that any other Asterisk user with a similar problem might benefit from it. I may or may not post it to an OpenH323 list, but since both variants of the H.323 channel in Asterisk use non-current OpenH323 versions, it may not be of any benefit to anyone anytime soon if I went that route!

Hello everybody. i have the folowing problem: i have this in the top of PREROUTING chain in mangle table iptables -t mangle -A PREROUTING -j CONNMARK --set-mark 0 # rule 1 iptables -t mangle -A PREROUTING -m connmark --mark 5 # rule 2 iptables -t mangle -A PREROUTING -m connmark --mark 6 # rule 3 i think when packet is passing trough my POSTROUTING in mangle table

Dear all, Could you teach me minimum required Asterisk modules, application and etc to install PSTN GW+SIP Client functionalities in a PC as shown below? I have already downloaded astersik-1.8.3.3 and dahdi-linux-complete-2.4.1.2+2.4.1 in the PC. Analog telephone --- PSTN GW + SIP Client --- SIP Server ******************** PC Since available

Hello there, I'm trying use asterisk to connect against mgcp endpoints, but i would like to use realtime mgcp gw/endpoint configuration, but i cannot find any documentation about how can I configure realtime mgcp gw configuration. Anyone here can guide me in order to configure it. Thank you Best Regards -- Jos? Seabra -------------- next part -------------- An HTML attachment was