similar to: Bandwidth throttling/limiting for all traffic

Hi! I''m trying to limit the uplink bandwidth using htb but no packets are overlimit or dropped. :-( My router config: * Linux kernel 2.4.20-pre10 (htb v3.7) with everything built as modules in QoS, iptables in use. * tc binary from htb3.6-020525.tgz * external interface eth0: Internet access, 512 kbit/s uplink speed * internal interface eth1: internal LAN, 100 Mbit/s The hosts in the

please, help, i have build vpn server (suse 9 + poptop), i have managed to implement tc htb in ip-up script, but every client has own ppp interface (ppp0, ppp1, ppp2...), and my idea is to share available bandwidth, not to limit connection, how to build root tc rule, when I have more then one interface?... please any one width experiance regards _______________________________________________

Hello! I have an internet connection of 64kbps garanteed in a channel of 256kbps. On this connection the metropolitan speed is 10Mbps and in the provider''s network the speed is 100Mbps. I have a few clients behind my linux box and i want to set up some limitations because some of them are using it irrational. I am marking the packets with 0 for internet; 1 for metropolitan 2 for

I am trying to shape a client (somewhat advanced). This is my target: Client is 192.168.2.224. I would like to allow him to download with 500000 bits/sec in general. But, for a specific port(say 22), i would like him to download with 300000 bit/sec only. The problem is that my configuration (maybe wrong) allows him to download with 800000 bit/sec. (500000 generally + 300000 on port 22) I thought

I`m trying to shape both upload (eth0) and download(eth1). I made this script to acomplishthis but the filters are not working even though the classes and qdiscs are created. What am I doing wrong? #!/bin/bash tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1 htb default 10 r2q 5 tc qdisc del dev eth1 root tc qdisc add dev eth1 root handle 1 htb default 10 r2q 5 tc class add dev

Hello, I run one of my PCs as my personal router, with iptables+tc to control traffic and be my firewall. In TC, I use a combination of htb, qdisc and sfq (as well as prio) to classify bandwidth. In my current setup, I have 10 classifications of my bandwidth. (Even I admit this is probably more than I need, but at this point I''m still learning, so I''ll just leave them be.)

Hey A wise man said to me that Hashing filters was my solution to rock the world, and making my life alot easier. When applying 4000 rules, the system had to check them all for match. But with hassing it would only require 1-2 checks. Even though when i had read the lartc on the subject i was no less that a question mark. If anyone have played with it, and have a working, logic configuration

Hi everyone, My HTB script is showing me those "r2q change" warnings. I read that I should test with r2q values to gain accuracy and stop the warnings but I made some tests with r2q and with burst and I still get the warnings. Any ideas on this issue will be very helpful. The script seems to be working as the bandwidth for the IPs is being shaped. The NIC works at 100mbit and the

I have some problem with traffic shaping on debian testing. I actually posted a full config on the list a while ago but didn''t get any answers. The problem is that traffic doesn''t get into the user classes (~150) when I associate a class with a qdisc. I tried sfq, fifo but none works. If I dont''t associate a qdisc with a class classification occurs well.

To stress the urgency and importance of my questions, I am willing to pay $100 to the first person that can provide me with the scripts/ rules that will work in my SnapGear firewalls that will solve the problems I am having. Please see the following post: Linux QOS and prioritization of real-time data (RTP/VoIP) Thank you!

Hello! I''ve put some questions on this list some weeks ago and I''ve got good answers. Thank you! Now I''ve finished my (beautyful) script and I ran it on my router... About my script: It routes packages based on their destination on the Internet. I have about 1650 preffered destination networks listed in some file. The script read this file and marks every package for

Hello list. I''ve configured a very simple script to slow down packets coming from a particular IP Address. I''ve used IPTABLES to mark traffic coming from this IP Address, but it does not appear to be working as expected. Let me first describe my system as maybe what I''m doing is beyond what NETFILTER can do. I have one machine that runs all my servers as

Dear All, I''m using the kernel 2.6.6, iproute2-2.4.7.20020116, iptables v1.2.9, and gentoo. I have a leased-line 64 kbps. I can see the counter works in iptables, but in the htb, it doesn''t go to the right class (it always go to the default class). Any help will be appreciated here''s my htb conf #!/bin/bash tc qdisc del dev eth1 root tc qdisc add dev eth1 root

Hi, I have some interesting problem with htb , I set up root class and sub-classess: $TC qdisc add dev eth0 root handle 1: htb $TC class add dev eth0 parent 1: classid 1:1 htb rate 1990kbit ceil 2000kbit $TC class add dev eth0 parent 1:1 classid 1:10 htb rate 190kbit ceil 200kbit $TC class add dev eth0 parent 1:1 classid 1:11 htb rate 1400kbit ceil 1600kbit $TC class add dev eth0 parent 1:1

I have: tc qdisc add dev imq0 root handle 1: htb default 30 tc class add dev imq0 parent 1: classid 1:1 htb rate 512kbit ceil 512kbit tc class add dev imq0 parent 1:1 classid 1:30 htb rate 64kbit ceil 512kbit then: iptables -t mangle -A PREROUTING -i ppp0 -s 192.168.2.2 -j IMQ --todev 0 tc class add dev imq0 parent 1:1 classid 1:22 htb rate 64kbit ceil 128kbit tc filter add dev imq0 protocol

Hello, I wrote a simple traffic shaping script (below) that should have allowed me to shape my internet traffic a bit (ppp0 - adsl 128kbit/64kbit; local interface eth0). The script works only partially - the speed is being limited but too much. Without running this script my download rate is about 10kBytes (with second computer also downloading at about 6kBytes). After running it my download speed

Hello, its me again, I won''t stop sending emails to this list, until I solve this problem, I''ve tried several apps to create the right htb rules (even made them my self), but I always get the same results, traffic gets shaped, but I can''t use my bandwidth, and this is weird, because I should be able to, also I keep seeing download being limited too, and that

Hi all, I''ve got a BOX running CentOS 4.5. It acts as a firewall + router. I have installed both iptables and iproute2. I has 3 network cards. eth0 is connected to Internet (is has an internet ip. pls assume its ip is 1.2.3.4/29). it is a 256 Kbit link. eth1 is DMZ. its ip is 192.168.100.254 eth2 is LAN. Its ip is 192.168.101.254 I have alreday shaped traffic to 64 Kbit on eth1 for

Hey, I have such a script: tc qdisc add dev $DEV root handle 1:0 htb default 21 r2q 2 tc class add dev $DEV parent 1:0 classid 1:11 htb rate 100mbit tc class add dev $DEV parent 1:11 classid 1:21 htb rate 512kbit ceil 512kbit tc class add dev $DEV parent 1:11 classid 1:23 htb rate 1024kbit ceil 1024kbit tc class add dev $DEV parent 1:11 classid 1:25 htb rate 3072kbit

Hi all, Im new to all this, and am still trying to get my head qround some of the concepts of how this all works. Ive read the howto''s, man pages etc. Ive setup packet shaping on my router/server box using HTB and SFQ, but its not working the way i would like. Im after shaping that has "weights" for classes so that a lower priority class will slow down when a higher class