similar to: Help with prioritizing internet Cafe Terminals

Hi All, I wonder can I do NAT+mangle+tc on same maschine? I want to shape outgoing traffic per IP on my gateway computer. Regards Emil Terziev _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Hello. I have been trying to duplicate these u32 matching rules using TCNG, but without much success: tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32\ match ip protocol 6 0xff \ match u8 0x05 0x0f at 0 \ match u16 0x0000 0xffc0 at 2 \ match u8 0x10 0xff at 33 \ flowid 1:10 Wondershaper 1.1a implements this and if I run it things seem to be shaped as expected. But this TCNG

Hello all, We have two ADSL lines configured on a single box, hence interfaces ppp0 & ppp1. Is there a way to route packets to ppp0, say based on destination port 80 & other traffic like voice through ppp1? Thanks.

Hi, I''m looking for a script in order to do traffic control on a ciber cafe LAN, with linux router. Ciber has about 40 hosts, and I haven''t much bandwidth (512kbit). Also, I''ve a squid cache and it works very good! I''ve found Jim QoS script, and FairNat. Which is more suitable for me ? Jim QoS ? FairNat ? other ? If I put FairNat, I would need ZPH patch

I know there is that handy patch available to very efficiently use ATM bandwidth, but I was wondering what the best values to use with a non-patched iproute2 would be. Anyone here care to check my logic in coming up with these numbers and perhaps suggest better values? My transmit speed is 768kbps per ADSL line (I have two). This is the HTB shaping I do on the interface (logic used for this

Hi, I''m a complete newbie at this traffic shaping / QoS stuff so please excuse me if this is a silly question. I''ve searched and searched on Google and I just end up confusing myself even more, so I thought I''d post my question to this list and see whether someone can help me! Basically, I am running a Linux box as a NAT router on my home network (machine name marvin).

Hi, I have a rather simple problem I have to solve, well I thought it would be simple, I''ve run into a problem. I think I must be missing something fundamental. I am trying to build a Linux router that simply throttles everything down to certain bandwidths. That is, no priority queuing ...etc, just slow all traffic down to the specified rates, which are 64,128,256,512 kbit. We want

Jim diGriz''s QoS Script ? http://www.digriz.org.uk/jdg-qos-script/ FairNat ? http://www.metamorpher.de/fairnat/ other ?? bests andres _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Dear list: I have a problem I cannot handle yet, and need to solve it as soon as possible. Would be very greatful with anybody who can help me. I have a 512/512 link to internet, that I want to share between several computers. I have eth0, with a public IP address, conected to Internet, and also, eth1, with a private IP address, for network with the surfing computers. I have a main class with

Hi. I wrote in a reply to a mail on here recently that you can''t set mpu (minimum packet unit) on HTB as you can on CBQ. I''ve just noticed that there is a patch on devik''s site which does mpu and overhead. http://luxik.cdi.cz/~devik/qos/htb/ For dsl users mpu is, for practical purposes going to be 106 - overhead is still variable though, depending on packet size.

I have: tc qdisc add dev imq0 root handle 1: htb default 30 tc class add dev imq0 parent 1: classid 1:1 htb rate 512kbit ceil 512kbit tc class add dev imq0 parent 1:1 classid 1:30 htb rate 64kbit ceil 512kbit then: iptables -t mangle -A PREROUTING -i ppp0 -s 192.168.2.2 -j IMQ --todev 0 tc class add dev imq0 parent 1:1 classid 1:22 htb rate 64kbit ceil 128kbit tc filter add dev imq0 protocol

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi Guys Ive got an internet cafe on which I have a debian sarge box running. The Debian box acts as a gateway and it has masquerading on. I have 40 client PC and i do not want to assign more than 64k per pc for upload and the same is true for download too. Ive done alot of research and Ive read tutorials about CBQ and HTB. I found that CBQ.init is

Hello, I have a serious problem with HTB which I wasn''t able to solve myself. I run a masquerading router with ppp0 as interface to the Internet. Three clients need to share a downstream of 1 MBit, which I want to divide with tc. When I see a packet being forwarded to one of these clients, I give it the appropriate unique mark: iptables -t mangle -A FORWARD -d 192.168.34.141 -j MARK

Hi, I'm running an internet cafe using Cyber Cafe Pro software. This software is design soley for Windows platforms. We're constantly experiencing problems with Windows with regards to viruses and stability issues. Recently, we lost all our data and had to re-install. May you please help us in flawlessly porting this application so that it can run on Linux both on the server and client

Hello! I have an internet connection of 64kbps garanteed in a channel of 256kbps. On this connection the metropolitan speed is 10Mbps and in the provider''s network the speed is 100Mbps. I have a few clients behind my linux box and i want to set up some limitations because some of them are using it irrational. I am marking the packets with 0 for internet; 1 for metropolitan 2 for

i''m trying to limit upload and download but something is wrong(it is about NAT) i will post here my "script" maybe someone could tell me what is wrong my kernel(2.6.9) is patch with imq(linuximq.net) and my iptables(1.2.11) also #flush tc qdisc del dev eth0 root tc qdisc del dev eth1 root tc qdisc del dev imq0 root tc qdisc del dev imq1 root ifconfig imq0 down

I`m trying to shape both upload (eth0) and download(eth1). I made this script to acomplishthis but the filters are not working even though the classes and qdiscs are created. What am I doing wrong? #!/bin/bash tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1 htb default 10 r2q 5 tc qdisc del dev eth1 root tc qdisc add dev eth1 root handle 1 htb default 10 r2q 5 tc class add dev

I am looking for a good htb traffic shaping script to prioritize incoming traffic over outgoing traffic for my machine. I have a 100mbit line, ftp up, backup data comming in, but whenever mirrors starts grabbing it they use all the traffic and the backup data comming in (the important data) drops to like 300kb/sec. I was thinking some script doing sleep 60 [if downstream > 1mb/sec, limit

Dear All, I''m using the kernel 2.6.6, iproute2-2.4.7.20020116, iptables v1.2.9, and gentoo. I have a leased-line 64 kbps. I can see the counter works in iptables, but in the htb, it doesn''t go to the right class (it always go to the default class). Any help will be appreciated here''s my htb conf #!/bin/bash tc qdisc del dev eth1 root tc qdisc add dev eth1 root

Hello to all people there . Can i guarantee ICMP respond time no metter how loaded is internet line . i have typical NATed enviroiment like External IP |linux router| LAN - 192.168.0.0/24 i have example setup with IMQ but is it possible to be done also if i attache htb to eth0 and eth1 for example . if i start shaper ping i better that without shaper but it''s not guarantted i mean