similar to: SEPARATING VOIP AND SURFING

Hi, complete newb and I apologise for it. I have a setup where my linux box has multiple broadband connection where I am routing certain things over certain interfaces, currently 2 links eth2 is a 1500/256 and eth3 is a 512/512, eth0 is the link to the LAN for users. What I am trying to do is traffic shape the information going out eth0 to the local users by the interface the traffic arrived

Salut lartc (lartc@mailman.ds9a.nl), 18:12:52 kernel HTB init, kernel part version 3.10 18:12:52 kernel HTB: quantum of class 100001 is small. Consider r2q change. 18:12:52 kernel HTB: quantum of class 100002 is small. Consider r2q change. 18:12:52 kernel HTB: quantum of class 100003 is small. Consider r2q change. 18:12:52 kernel HTB: quantum of class 100004 is small. Consider r2q change.

Actually i gave up, i tried and tried and tried so many times, upgrading software falling back to an old version but it didn''t work, that''s it. i can''t do work together tc with iptables and iproute2 when i mark a packet with iptables tc doesn''t recognize them so it falls at the default leaf of the tc''s tree what i like is to mark packets depending on

Hello all, I have set my QoS solution and now I am facing a little problem... When I ping to my server it has some lost packages: Estatísticas do Ping para 172.30.0.1: Pacotes: SENDED = 1029, RETURNED = 880, LOST = 149 (14% de perda), Aproximar um número redondo de vezes em milissegundos: Mínimo = 0ms, Máximo = 686ms, Média = 105ms If I disable my QoS ping stats to be ok. I even have

Hi All, I''ve got an interoffice IPSEC VPN in place that I''m trying to give priority to terminal service (tcp 3389) traffic. I''ve created rules at each end, but have hit a bit of a dillemma. As the data is encrypted I must also give highest priority to protocol 50 otherwise the priority is lost as the packet gets encrypted. When I do this however, I can''t

Hi, I have some interesting problem with htb , I set up root class and sub-classess: $TC qdisc add dev eth0 root handle 1: htb $TC class add dev eth0 parent 1: classid 1:1 htb rate 1990kbit ceil 2000kbit $TC class add dev eth0 parent 1:1 classid 1:10 htb rate 190kbit ceil 200kbit $TC class add dev eth0 parent 1:1 classid 1:11 htb rate 1400kbit ceil 1600kbit $TC class add dev eth0 parent 1:1

Hey, I have such a script: tc qdisc add dev $DEV root handle 1:0 htb default 21 r2q 2 tc class add dev $DEV parent 1:0 classid 1:11 htb rate 100mbit tc class add dev $DEV parent 1:11 classid 1:21 htb rate 512kbit ceil 512kbit tc class add dev $DEV parent 1:11 classid 1:23 htb rate 1024kbit ceil 1024kbit tc class add dev $DEV parent 1:11 classid 1:25 htb rate 3072kbit

Hello all, I am trying to make a filter into my QoS rules and I founded that when I try to use filters u32 and with fwmark they do not work together. This is the filter I use, just and example, for u32: $TC filter add dev $DL parent 1:0 protocol ip prio 1 u32 match ip sport 22 0xffff flowid 1:10 This is working fine. Now if I try to mark a package that I want it to go to the same

Hello all! As far as I know that the traffic that will pass thru the router is balanced so that all connections have the same privilegies. Is it possible to configure the linux based router so that all computers will have the same privilegies? I mean that if in default case full traffic is splitted by connections, so I need to split it by users to prevent one user occupy all traffic by starting

----- Original Message ----- From: Michał Joachimiak To: lartc@mailman.ds9a.nl Sent: Tuesday, July 20, 2004 3:45 PM Subject: HTB - Really Big problem Hello everybody! Since week i dig lists and www and can''t find solution for my problem. I''m using HTB 3.13 kernel 2-4-25 smp iptables 1.2.9. I''ve got situation like this: LAN------Linux Box(routing only)------- Linux

Dear All, I''m using the kernel 2.6.6, iproute2-2.4.7.20020116, iptables v1.2.9, and gentoo. I have a leased-line 64 kbps. I can see the counter works in iptables, but in the htb, it doesn''t go to the right class (it always go to the default class). Any help will be appreciated here''s my htb conf #!/bin/bash tc qdisc del dev eth1 root tc qdisc add dev eth1 root

Hello! I have an internet connection of 64kbps garanteed in a channel of 256kbps. On this connection the metropolitan speed is 10Mbps and in the provider''s network the speed is 100Mbps. I have a few clients behind my linux box and i want to set up some limitations because some of them are using it irrational. I am marking the packets with 0 for internet; 1 for metropolitan 2 for

Hello, I have begun to use the tc scripts since 2 weeks ago, so I am beginner. I am trying to divide my bandwidth in 4 independent ones. Each of these sub-bandwidths is assigned to 4 different groups of ip. Bandwidth sharing is allowed. I put a Linux with two Ethernet card between the router and the LAN. Eth1 is the card connected to the router and eth0 is the one connected to the LAN. My ISP

I''m a new comer. I have problems using tc+htb. I run the following commands, and expect outgoing ssh flow goes into 1:11. But actually it goes into default 12. What''s wrong? tc qdisc add dev eth0 root handle 1: htb default 12 tc class add dev eth0 parent 1: classid 1:1 htb rate 1000kbit ceil 2000kbit prio 1 tc class add dev eth0 parent 1:1 classid 1:11 htb rate 100kbit ceil

Hello everyone, First of all, sorry for my poor english. I''ve been working with this for a few weeks and I''m getting sick... I''m trying to control the bandwith in my network using the following script. The machine where the script is running makes NAT, eth0 is connected to the router and eth1 is connected to the Lan. When I run the script it doesn''t appear any

Hello, I have installed a server with three physical ethernet links and some virtual interfaces: eth0 - 213.215.42.70 eth0:1 - 213.215.42.71 eth0:2 - 213.215.42.72 eth0:3 - 213.215.42.73 eth0:4 - 213.215.42.74 eth0:5 - 213.215.42.75 eth0:6 - 213.215.42.76 eth0:7 - 213.215.42.77 eth0:8 - 213.215.42.78 eth2 - 192.168.1.128 eth3 - 213.215.42.69 All traffic are routed by iproute2 and iptables

Hello i''m having some issues trying to match packets using iptables mark, iproute filter and tc filter.- i mean, when i do iptables -t mangle -A INPUT -p tcp --dport 80 -j MARK --set-mark 20 iptables -t mangle -A PREROUTING -p tcp --dport 25 -j MARK --set-mark 10 iptables -t mangle -A FORWARD -p tcp -i eth0 -o eth1 --dport 25 -j MARK --set-mark 10 $TC qdisc del dev $INET_IFACE root $TC

hello, I have working htb system with about 1000 users. Until now I reload all rules at change, but it take too much time to apply. I cannot delete applyed filters. There is rules for one user: #!/bin/bash -v # Download shaper EX -> 2:20 /sbin/tc class add dev eth2 parent 2:20 classid 2:1775 htb rate 8000Kbit ceil 10000Kbit quantum 1514 /sbin/tc qdisc add dev eth2 parent 2:1775 sfq perturb

Hi I''m doing traffic shaping with tc on ''10.0.0.0/30'' and ''10.0.0.28/30''. I want to delete part of shaping rules on the fly. (see my configuration at the end of this mail) I wan''t to delete the shaping for ''10.0.0.0/30'' on the fly while still keeping the shaping for part ''10.0.0.28/30'' running. When I for

I''m trying to shape each machine on an interface to 256k each, but I''m getting stuck and only able to shape an entire interface to 256k. What should I be doing differently here? tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1: htb default 10 tc class add dev eth0 parent 1: classid 1:1 htb rate 100MBit ceil 100MBit tc qdisc add dev eth0 parent 1:10 handle 110: