similar to: Burst problem!

Hello! I have an internet connection of 64kbps garanteed in a channel of 256kbps. On this connection the metropolitan speed is 10Mbps and in the provider''s network the speed is 100Mbps. I have a few clients behind my linux box and i want to set up some limitations because some of them are using it irrational. I am marking the packets with 0 for internet; 1 for metropolitan 2 for

Hello all, I am providing broadband service through DVB circuit. I have 4KB uplink and 32KB downlink. I want to share 32KB downlink bandwidth among 192.168.0.0/24 (20 users in this subnet i.e 192.168.0.2-192.168.0.22)subnet where each user will get 2KB to 6KB bandwidth. And from 4KB uplink bandwidth each users will get only 1KB to 2KB bandwidth.

Hi! Here''s what I want: root class 0010 premium parent class 1000 premium child classes 1xyz best-effort parent class 2000 best-effort child classes 2xyz default class 3000 Here''s how I do it: eth1: DEFAULT=3000 eth1-0010.root: RATE=100Mbit LEAF=sfq eth1-0010:1000.premium CEIL=352Kbit RATE=352Kbit PRIO=2 LEAF=sfq eth1-0010:1000:1xyx.child1 CEIL=32Kbit RATE=8Kbit

Hello. I''m newbie with QoS. I read some articles and I have a question on You. If you have time to spare, it would be great if you reply. Here is my problem. I''m on wireless network(no earnig comunity). We got 2/2Mbit(soon 4/4) for 100 people(sharing link). Not long ago people start screaming that their games don''t work good(lagging). So I add to our qos class games

Hi there, I have two questions: 1) In the following setup: tc qdisc add dev eth1 root handle 1: htb tc class add dev eth1 parent 1: classid 1:1 htb rate 100Mbit tc class add dev eth1 parent 1:1 classid 1:10 htb rate 128Kbit tc class add dev eth1 parent 1:10 classid 1:11 htb rate 32Kbit ceil 128Kbit tc class add dev eth1 parent 1:10 classid 1:12 htb rate 32Kbit ceil 128Kbit I have observed

Hello all, I am trying to configure a linux box to make some QoS into my netowork and, at the same box, control my clients bandwidth. I have this classes created: ---------------------------------------------------------------- UP="eth0" # wan infocontabil DL01="eth2" # lan clientes $TC qdisc del dev $DL01 root 2> /dev/null >

Dear List, I am trying to limit some IP blocs with tc with following three step. # interface tc qdisc add dev eth0 root handle 1: cbq avpkt 1000 bandwidth 256kbit # class tc class add dev eth0 parent 1: classid 1:1 cbq rate 64kbit \ allot 1500 prio 5 bounded isolated # rules # download tc filter add dev eth0 parent 1: protocol ip prio 16 u32 \ match ip dst 10.0.1.0/24 flowid 1:1 # upload tc

Dear List, Sorry for the dublicated email but I couldn''t get any answer. I am trying to limit some IP blocs with tc with following three step. # interface tc qdisc add dev eth0 root handle 1: cbq avpkt 1000 bandwidth 256kbit # class tc class add dev eth0 parent 1: classid 1:1 cbq rate 64kbit \ allot 1500 prio 5 bounded isolated # rules # download tc filter add dev eth0 parent 1:

Hi, I´m shaping traffic using htb on both interfaces, I noticed that shaping download traffic is workinggreat but shaping upload traffic is not working at all (no sent packets, no dropped, no overlimits)I have eth0 facing the backbone and eth1 facing the LAN. Thanks for your help.These are the commands I run:tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1 htb default 10 r2q 5 tc

Hi all :) I''m new to this list, as I''m new too to traffic shaping ;) I''ve set up an FTP server in my ADSL line and I wanted it to serve as fast as possible as long as I don''t use my outgoing ADSL bandwidth, and I''m currently using HTB for that (succesfully, I must add). The problem is (when the FTP server is serving higher than its

Hello. I am wondering if the default (auto-computed) burst and cburst parameters are appropriate values for my application. I have a 100 mbit interface which is connected to a 16 mbit uplink. I am sharing this bandwidth into a set of partitions (tc classes) defined as follows: root class [1:1] |

Hi all, Here is a RRD graph ive just made of my packet shaping setup: http://www.overclockers.com.au/~mwp/temp/tc-1hour.png The app creating the P-25 traffic is bittorrent on the Linux box also doing the shaping. P-22 and P-23 is created by FTP transfers. Starts with bittorrent running. At 00:03, an FTP transfer is started on "cool.comp" (windows box). At 00:09, bittorrent is

Hello, I have wrote some scripts to shape about 1000 workstations. My config: Pentium IV - 2GHz, 1Gb RAM, RedHat Enterprise Advanced Server 3, kernel 2.4.21-9.EL, iproute-2.4.7-11.30E.1 2 Gigabit Lan cards in bridge mode. I use htb. Everything work fine, but I have troubles with showing running configuration. # Init shaper root for dev eth0 tc qdisc add dev eth0 root handle 2: htb default 200

I''m new on this mailing list, reading it for last 4 weeks, ... Need help please... I want to implement tc rules on br0 witch is build of wlan0, wlan0wds0, wlan0wds1? I did something but it doesn''t do good job, it doesn''t give constant flow ... any idea, please if someone already have experiance... OS: Suse 9.0 myshaper

Dear All I am a newbie to traffic control and i am trying to setup bandwidth restriction in my local network as well as internet access to users. I got around 60 pcs in my lab and i am planning to divide bandwidth based on classes. I am using iptables to mark packets and then route the traffic to the specified class. Following is the network setup Two network cards in the server eth0

Lartc readers I have a peculiar problem with shaping and firewalling. My tc rules work great, below is a smaller version: #Root tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1: htb default 100 #Root Class tc class add dev eth0 parent 1: classid 1:1 htb rate 1024kbit quantum 20000 burst 15k #Class for each user tc class add dev eth0 parent 1:1 classid 1:2 htb rate 32kbit ceil

Congratulations to our 2009 Google Summer of Code Students: Claudiu Mihail Liu Aleaxander Claudiu will work on CLI/parser migration to C, and Liu will work on ext4 support and filesystem migration to C. In combination, this should help get Syslinux into a much more portable state. We're looking forward to your work! -hpa

Hello to all people there . Can i guarantee ICMP respond time no metter how loaded is internet line . i have typical NATed enviroiment like External IP |linux router| LAN - 192.168.0.0/24 i have example setup with IMQ but is it possible to be done also if i attache htb to eth0 and eth1 for example . if i start shaper ping i better that without shaper but it''s not guarantted i mean

Hello, Besides a very good functionality, I have a small, yet stressing, problem. Let''s say I have a bandwidth of N bits. I have X clients, everyone with his fixed bandwidth. I create htb qdsics for each client. Each leaf has sfq queueing discipline. A sample config would be like this : tc class add dev eth0 parent 1:2 classid 1:346 htb rate 32Kbit ceil 32Kbit burst 4k

Hello... Im trying to setup HTB to allow me to shape traffic from two upstreams that meets on single lan0 interface. I prefer to use HTB qdisc within HTB root qdisc for cleaner rules design. Seems that it doesnt work at all. tc -s class show doesnt show any traffic on other classes attached to HTB qdisc. Linux 2.6.20.7 iproute-2.6.20-070313 Weird thing is that tc -s class show that 1: and 2: