similar to: Looking to reccomendations

Hi, I''m trying to setup QoS in my TSL box. Following to mailing list reccomendations I changed PSCHED_CPU but can''t get accurate shaping with HTB. I have disabled HYSTERESIS also (by setting it to 0). I have Intel Celeron 1.8Mhz (TSC supported I think). ******** My script ****** tc qdisc add dev eth0 root handle 1: htb default 22 r2q 10 # Class corresponding interface

Zviad O. Giorgadze wrote: > My ISP provides guarantied 115kbit bandwidth for GLOBAL TRAFFIC. During the low load period (early morning, evening, night) customers can get up to 1mbit traffic. That''s download traffic we''re talking about, since you seem to be shaping on your local LAN interface? Variable rate ISPs are tough to shape right, I guess... Does this 115kbit vs.

Hello LARTC, Internet connection - ADSL, interface nas0 (115kbit guarantied, up to 1mbit possible. Depends on ISP load, impossible to guess). Internal interface LAN, eth0. Is it possible to successfully shape download traffic on eth0 using HTB? Classes must have guarantied rate calculated from 115kbit possible rate (for example 3 classes) and the possibility to borrow up to 1mbit (depends on ISP

>"Zviad O. Giorgadze" wrote: >> # Put flow to corresponding classes >> tc filter add dev eth0 protocol ip parent 1: u32 match ip dst 192.168.0.1 flowid 1:21 >> tc filter add dev eth0 protocol ip parent 1: u32 match ip dst 192.168.0.2 flowid 1:22 >> tc filter add dev eth0 protocol ip parent 1: u32 match ip dst 192.168.0.3 flowid 1:23 >> tc filter add dev

>Hi everyone, and thanks for your help so far. > >I have been playing around with tc and htb for a couple of weeks now, and >while I am nowhere near understanding everything here, I am beginning to >know more about packets than I ever wanted to know. > >I have two university buildings with a 1mb connection to the Internet. The >two buildings (on either side of town) are

Hi people I''m new to the mailing list, but I''ll save my presentation to another mail as I already have some strong questions. Now I just faced this mail that arose me a question I had when "installing" my qos. > Internet connection - ADSL, interface nas0 (115kbit guarantied, up to 1mbit possible. Depends on ISP load, impossible to guess). > Internal interface

Hello, I'm looking to connect Asterisk with three (four in the future) PSTN lines, and would like to get some opinions on the TDM400 Digium card, vs. sip gateways like the Mediatrix 1204, vs. other hardware solutions I'm not yet aware of. I need the ability to prioritize which PSTN lines are used for outgoing calls (I understand this can be done with the Mediatrix --

In message <BLU0-SMTP2660F9FD24F490433C41E898BBA0 at phx.gbl>, Ady wrote: >Regarding UBCD, Clonezilla (and GParted) Live, I happen to know that >they are working on improving bootability. > >Regarding improving Syslinux, feedback is the way. Other than that, >it seems to me that in this particular case the issues are more >related to how the partitioning and formatting

Hi all, I want to implement a captcha on my register page to help weed out any ''non-human'' visitors. I was told to check out http://expressica.com/simple_captcha/ but the site isnt responding. Does anyone have any other reccomendations that are tried and tested & successful? Many Thanks -- You received this message because you are subscribed to the Google Groups

I am running HTB on a PowerPC platform and using following script to do rate limit. When I set rate of class 1:11 lower than 4mbit, I can get traffic rate close to the setting. However, if I set the rate higher than 4mbit, I will get much lower bandwidth (roughly 4.5mbit) than the setting, no matter how big the setting is. To verify the script, I run it on PC with then I got correct result. Could

Hi there, I'm very new here and would like to know if anyone has reccomendations on fundamental reading (other than the handbook) whick might prevent me from asking some really dumb questions (after this one of course). What I'm trying to do: I have a SOHO... very SO in fact. I would like to build a simple system with two analog lines. I do recording and can't always have a cell

Looking for a radio tuner for my audio server. Needs to do AM. Any hardware reccomendations? -- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- - - - Jason Pyeron PD Inc. http://www.pdinc.us - - Principal Consultant 10 West 24th Street #100 - - +1 (443) 269-1555 x333

Greetings all, I''ve got an app in production at dreamhost, but I can''t seem to force FCGI on it. I have it enabled for the domain in the admin panel, have checked the file permissions in my public folder, and tried firing the scripts from the command line. When firing either dispatch.cgi, or dispatch.fcgi from the command line, I get a 500 internal server error on BOTH.

It seems Andreas Klauer''s fairnat has experimental support for using HTB''s MPU and overhead options. fairnat.config: # Use MPU for HTB. From the LARTC Howto on MPU: # "A zero-sized packet does not use zero bandwidth. For ethernet, no packet # uses less than 64 bytes. The Minimum Packet Unit determines the minimal # token usage for a packet." HTB_MPU=0 # HTB_MPU=64

Hi, there I'm trying to get the value of the Mean Square from the ANOVA model summary that comes from specifying the error term, and am wondering if one can actually do this ( I know it's possible when using anova(lm) objects and the like, but I'm having a tough time with it under this framework). There does appear to be some indexing in the output of this type, but perhaps not

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi there! Well, as an exercise, I try ''simulating'' an adsl link (just the speed ;o)) with a GRE tunnel and HTB for bandwidth limiting. Typically in germany adsl has about 1024kbit downstream and 128kbits upstream (yes, there are others ;) but these are what I have) - which are the values i try to simulate. Here is the snipped that

Hello, After reading the lists and taking reccomendations from TC, I have finally given up on the echo can built into asterisk. I am sick of hearing complaints from users, so the money spent on a hardware echo can will be worth its weight in gold. I am curious however, about some setup and component requirements. It seems as if every telecom place I call, either never calls back or doesn't

On 01/19/2014 03:47 PM, Ronald F. Guilmette wrote: > > Doesn't the Syslinux project provide (hopefully strong) specific > reccomendations, to its user base, for how these things should best > be done, you know, in order to insure maximal interoperability? > We try (see our wiki), but those recommendations can only come from mass testing across many, many systems -- which we

Mhhh. I am streaming from a 8mbit adsl connection so it should be fast enough. I tried streaming with media player, it's working for 24 hours now, doesn't seem to have the problem, is my winamp 5.03 broken? Or is winamp broken in general? :) Thanks for the help. Silvester -----Original Message----- From: Karl Heyes [mailto:karl@xiph.org] Sent: donderdag 2 september 2004 22:57 To:

Hi, I''m trying to make a shaper / firewall to improve sharing of bandwidth on a ADSL (3mbit down / ½ mbit up) Since the ADSL is very asymmetric, down is unimportant, I make a ingress rate limit shaper to ensure, all shaping is at the Shaper, and not on the Router or the ISP. The Idea is then to make one HTB hierarchy and have each client (IP) filtererd and put in a child-HTB queue.