similar to: IPSec with 2.6.9 and Windows clients

Hi.... I''m trying to setup a LAN router with P2P filter but the problem is that can''t "catch" Ares. There is a way to DROP "ares" p2p packets ? I''ve tried with last "ipp2p" snapshot without sucess... I''ve Kernel 2.4.28 iptables 1.3.0 Various Patches from patch-o-matic-ng-20040621 iproute2-ss020116 IMQ Patch Esfq Patch

Hi! I''m wondering whether anyone has successfully set up a bandwidth control system using ipp2p and shorewall. I have been able to drop connecions altogether, but I don''t seem to be able to get CONNMARK working with ipp2p. Any pointers would be greatly appreciated :) ______________________________ Mario R. Pizzolanti

Hello everybody. i have the folowing problem: i have this in the top of PREROUTING chain in mangle table iptables -t mangle -A PREROUTING -j CONNMARK --set-mark 0 # rule 1 iptables -t mangle -A PREROUTING -m connmark --mark 5 # rule 2 iptables -t mangle -A PREROUTING -m connmark --mark 6 # rule 3 i think when packet is passing trough my POSTROUTING in mangle table

Hi, I found that I had some thinking error with the wshaper script. I assigned the bandwith of my DSL connection to it, but the machine where it runs is normally connected to the LAN with 100Mbit behind a separate Hardware-Router.Obviously, the complete connection of the machine was slowed down to 384k because I told it so.I guess, since wshaper takes only one card as argument, I can''t

Hi I want to use two dsl (or more) lines to increase my internet bandwidth. Our dsl lines are dhcp serviced, so when we pull together two dsl modems, both of them provide the same def gw and different ip in the same subnet (i also assume that arping gives the same MAC for the def gw since it''s a bridged network). ¿Is it possible to balance outgoing traffic "using" the

Hi. there is a way to MARK udp VOIP (SIP) traffic, in order to put in a highest prio class ? Traffic flow seems start on udp 5060 port, but next both server and client seems jump to a random(?) port. I can''t use CONNMARK because is udp traffic. I only see a pattern for L7 patch in order to SIP traffic identification , but I run 2.4 kernel series . When you patch 2.4 kernel with

Hi, I have a setup like this: class 1:1 rate 7600kbit (on a imq device) | |\class 1:10 rate 100kbit ceil 5600kbit prio 7 (here goes p2p traffic) \class 1:12 rate 7500kbit ceil 7600kbit | |\class 1:121 rate 3100 ceil 7500kbit prio 0 |\class 1:122 rate 2200 ceil 7500kbit prio 2 \class 1:123 rate 2200 ceil 7500kbit prio

Hi all, I am running Slackware 10.1 with Kernel 2.6.14.3 includes iptables 1.3.4 with layer 7 My network diagram below: - INTERNET --- LINUX_ROUTER_FW --- PCs Below is my simple iptables script: - echo 1 > /proc/sys/net/ipv4/ip_forward iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE iptables -t mangle -A POSTROUTING -m layer7 --l7proto applejuice -j MARK --set-mark 1 iptables -t

Hello, I''ve been trying to shape the bittorrent traffic (on my external interface, upload), but without luck, for this I''m using layer7 filter right now, but I''ve also tried ipp2p, with the same results, I might say that this is not a problem with this packet classifiers, the problem is with HTB, here''s why. When I open azureus (the bittorrent client I

Hi, I''ve a linux as router nat + firewall (POLICY DROP for INPUT OUTPUT and FORWARD) but, I''ve put next rules for p2p software on FORWARD chain [... snip ... ] iptables -F FORWARD iptables -P FORWARD DROP iptables -A FORWARD -p tcp --dport 80 -j ACCEPT iptables -A FORWARD -p tcp --dport 25 -j ACCEPT [... snip ... ] iptables -A FORWARD -m ipp2p --ipp2p -j ACCEPT iptables -A

Hello, its me again, I won''t stop sending emails to this list, until I solve this problem, I''ve tried several apps to create the right htb rules (even made them my self), but I always get the same results, traffic gets shaped, but I can''t use my bandwidth, and this is weird, because I should be able to, also I keep seeing download being limited too, and that

Hello, I''m new to the list and iproute2 itself. I was searching for a way to simultaneously use several IPs on the *same network interface* for outbound traffic. Let me explain: I have eth0 interface to which I set 2 IP addresses; 192.168.0.1 and 192.168.0.2. Then I want to connect to Internet through 192.168.0.254 gateway using round-robin between those 2 addresses. The iproute2

Hey, one more question for ipp2p iptables -t mangle -A DSL-IN -p tcp -m ipp2p --ipp2p -j CONNMARK --restore-mark iptables -t mangle -A DSL-IN -p tcp -m mark ! --mark 0 -j ACCEPT iptables -t mangle -A DSL-IN -p tcp -m ipp2p --ipp2p -j MARK --set-mark 7 iptables -t mangle -A DSL-IN -p tcp -m ipp2p --ipp2p -j CONNMARK --save-mark iptables -t mangle -A DSL-IN -p udp -m ipp2p --ipp2p -j MARK

Hi all, Whenever I start up TC and implement traffic policing using ingress, I get logs that goes something like this: Classifier actions preferred over ingress. What does that mean?? This are the relevent lines : tc qdisc add dev $DEV handle ffff: ingress tc filter add dev $DEV parent ffff: protocol ip prio 50 u32 match ip src 0.0.0.0/0 police rate ${DOWNLINK}kbit burst 10k drop flowid :1

Hello, You will find in attachment the layout of my current physical configuration. For now, the Cable ISP is not used. Since it is a dynamic ISP, my mailserver is rejected and my domain name registers on blacklists like ORDB and al. I want it to be used as a default gateway except for my mail server that would be seen as coming from my "honest" ADSL ISP. Here is

Hi, I''m having problems with this configuration: iptables 1.3.7 (vanilla or repackaged for fc5) kernel 2.6.19 (vanilla) ROUTE 1.11 (last pom-ng) layer7-filter 2.6 (last in sf.net) connlimit (last pom-ng) When I try to use -j ROUTE in any chain in mangle table I have this error: [root@myhost ~]# iptables -v -t mangle -A POSTROUTING -p tcp --dport msnp -j ROUTE --gw

Hi to all. I recently upgraded to shorewall ver 2.3 from 2.0 so I could explore the multiple ISP/dual default route setup feature of version 2.3, I also upgraded iptables from 1.2 to 1.3 (rpm-based install) but when I tried to start shorewall it terminates and I noticed it''s giving me this error iptables: No chain/target/match by that name ERROR: Command "/sbin/iptables -t mangle -A

As seen on my post at: http://www.sveasoft.com/modules/phpBB2/viewtopic.php?p=28112#28112 This works very well... It does NOT work with stable 4.0! sveasoft will be issuing a bug fix for this (4.1) in the near future. Final Rev of working script w/ asterisk support I'm not going to run alchemy on production machines until it is stablish. Remember to set your uplink properly and to set

Hi All , My first message and I have a little problem with my FC6 box trying to block emule traffic using layer7 . Here my network : Internet --------- ADSL Router ------------------- FC6 Box -------------------- Emule Box external ADSL : Dynamic Internal ADSL : 192.168.254.1 external FC6 : 192.168.254.3 internal FC6 : 192.168.253.1 Emule Box : 192.168.253.3 I guess that everything

Hello, I have finished setting up the load balancer with IPROUTE ... also patch the kernel to support DGD and now it''s working fine with the valuable guide at LARTC website, Julian Anastasov, and the kind people in this mailing list. Now I would like to launch a web server and a ftp server to the public but I''m stuck into a problem and really need your help. Currently internal