similar to: Role of Application? How big?

Hi! I have just started with traffic shaping, and after hours of reading websites, man pages asf. I am still stumped at one problem I have. The interface eth0 is attached to the outside world, and I have an openvpn tunnel to another part of the organization using eth0 and port 5001. The idea was that all traffic going through the tunnel would have top priority and the rest share

Hello! I have an internet connection of 64kbps garanteed in a channel of 256kbps. On this connection the metropolitan speed is 10Mbps and in the provider''s network the speed is 100Mbps. I have a few clients behind my linux box and i want to set up some limitations because some of them are using it irrational. I am marking the packets with 0 for internet; 1 for metropolitan 2 for

Hi! I have a setup where I want to prefer traffic on one port (for testing purposes I used port 22) my setup is : tc qdisc add dev eth3 root handle 1: htb default 30 tc class add dev eth3 parent 1: classid 1:1 htb rate 96mbit burst 15k tc class add dev eth3 parent 1: classid 1:7 htb rate 2mbit burst 15k tc class add dev eth3 parent 1:1 classid 1:10 htb rate 96mbit burst 15k tc class add dev

----- Original Message ----- From: Michał Joachimiak To: lartc@mailman.ds9a.nl Sent: Tuesday, July 20, 2004 3:45 PM Subject: HTB - Really Big problem Hello everybody! Since week i dig lists and www and can''t find solution for my problem. I''m using HTB 3.13 kernel 2-4-25 smp iptables 1.2.9. I''ve got situation like this: LAN------Linux Box(routing only)------- Linux

I have a network with around 40 /24 subnets that shares a common DSL, this cries out for shaping so here I am trying to make it work as my first tc project. I have managed to cargocult some snippets from this list and tried to come up with a config, but there are a few things that I''d really like some input on: 1) Are the NAT''ed addresses available in the PREROUTING table

Dear All, I’m working with Fedora Core 3, kernel 2.9.1, MPLS-for-Linux-4.193, and having some problems when create a HTB queue. ALL packets goes to the default queue, they don’t care about any mark or ip field I use to enqueue them. : -/ That’s the deal, all packets that incoming the interface eth2 are classified and have theirs TOS field changed following some qos policy at the PREROUTING

Hi, Is it possible to attach another qdisq under a HFSC classfull ? I try it and the configuraton works : $TC qdisc add dev $dev root handle 1: hfsc default 30 $TC class add dev $dev parent 1: classid 1:1 hfsc sc rate ${RATE}mbit ul rate ${RATE}mbit $TC class add dev $dev parent 1:1 classid 1:10 hfsc rt umax 1500b dmax 30ms rate 200kbit $TC class add dev $dev

Hi list, I''m trying to do qos based on HTB, in my linux box wich is my firewall and transparent proxy, and I don''t have the possibility to put other machine to make proxy. Well, If I up my htb scripts, the proxy will be limited to serve my LAN as a external site and limited to the limit of 768kbits, even making two classes, tryn to limit it traffic to the maximun bandwidth

Hi When I list all the qdisc with tc command it is not possible to see the parent of the qdisc. An example by the book. # tc qdisc add dev eth0 root handle 1: htb default 30 # tc class add dev eth0 parent 1: classid 1:1 htb rate 6mbit burst 15k # tc class add dev eth0 parent 1:1 classid 1:10 htb rate 5mbit burst 15k # tc class add dev eth0 parent 1:1 classid 1:20 htb rate 3mbit ceil 6mbit

hello, I have working htb system with about 1000 users. Until now I reload all rules at change, but it take too much time to apply. I cannot delete applyed filters. There is rules for one user: #!/bin/bash -v # Download shaper EX -> 2:20 /sbin/tc class add dev eth2 parent 2:20 classid 2:1775 htb rate 8000Kbit ceil 10000Kbit quantum 1514 /sbin/tc qdisc add dev eth2 parent 2:1775 sfq perturb

Hi I have the following problem: I''ve created qos script which shapes traffic on outgoing interface eth1. More - less it looks like this : ------------------------CUT------------------------------------------------------ #root qdisc and class for eth1 $tc qdisc add dev eth1 root handle 1:0 htb default 19 $tc class add dev eth1 parent 1:0 classid 1:1 htp ratel ${CEIL_UP}kbit ceil

Hello all, I am providing broadband service through DVB circuit. I have 4KB uplink and 32KB downlink. I want to share 32KB downlink bandwidth among 192.168.0.0/24 (20 users in this subnet i.e 192.168.0.2-192.168.0.22)subnet where each user will get 2KB to 6KB bandwidth. And from 4KB uplink bandwidth each users will get only 1KB to 2KB bandwidth.

Hi all, I''m trying to marking packets with iptables and use tc filter to catch this packets. I configure my device: tc qdisc del root dev eth0 tc qdisc add dev eth0 root handle 1: htb default 10 tc class add dev eth0 parent 1: classid 1:1 htb rate 3000kbit ceil 6000kbit burst 15k tc class add dev eth0 parent 1:1 classid 1:10 htb rate 2000kbit ceil 4000kbit burst 15k tc qdisc add dev eth0

Dear List, I am a tc newbie, and I''ve been working through the LARTC HOWTO to try to understand how qdiscs, classes, and filters fit together. I was confused by the example in section 9.5.5.1 (see excerpt below). I thought that classes were could only be attached to qdiscs (classful ones). In the example, however, classes are being attached to other classes. Can anybody explain to me

Hello, I use rrdtool to graph the traffic in the different classes on an interface, eth1. Basically, I use the output from tc -s qdisc ls dev eth1 my tc script (which is only for testing the graphing) looks like this: /sbin/tc qdisc add dev eth1 root handle 1: htb default 20 r2q 1 /sbin/tc class add dev eth1 parent 1: classid 1:1 htb rate 200kbit burst 15k /sbin/tc class add dev eth1 parent

Hello, I have recently started looking at tc and iptables. I have an htb-queue with two classes 1:10 and 1:20 where 1:20 is the default. Then I use iptables to mark all packets I send out on eth1. I then filter marked packets into class 1:10. I expected all packets sent on eth1 to end up in class 1:10, but some packets still go to 1:20. Did I do it wrong? Thank you for any help. regards, David

Hello! I have a problem with i detalied in an early mail but there was no answer so i will try to be more specific. i have this tc class add dev eth0 parent 1: classid 1:1 htb rate 64kbit ceil 256kbit burst 15k quantum 1500 tc class add dev eth0 parent 1:1 classid 1:100 htb rate 32kbit ceil 256kbit burst 15k tc qdisc add dev eth0 parent 1:100 handle 100: sfq perturb 5 quantum 1500 tc

Hello, I''m trying to get lossless VoIP traffic over my 3000k/500k ADSL line. Shaping outgoing traffic is no problem: I set total ceil for outgiong device (ppp0) to 450kbit and put VoIP into highest prio class. Even during full upload the voice is clean on the other end. Now I tried to get the same result for incoming data. I attached HTB to eth1 where the incoming voip traffic is

>Hi everyone, and thanks for your help so far. > >I have been playing around with tc and htb for a couple of weeks now, and >while I am nowhere near understanding everything here, I am beginning to >know more about packets than I ever wanted to know. > >I have two university buildings with a 1mb connection to the Internet. The >two buildings (on either side of town) are