similar to: help with outbound shaping on 1 nic

>Theory is.. You can only shape outbound traffic. Inbound is via tcp windowshaping etc.. In theory yes, but it is shaping inbound transfers to my server. >> iptables -t mangle -A MYSHAPER-OUT -p tcp --sport 65437 -j MARK --set-mark 20 >> iptables -t mangle -A MYSHAPER-OUT -p tcp --sport 50000:51000 -j MARK --set-mark 20 >> iptables -t mangle -A MYSHAPER-OUT -m mark --mark 0

>In theory yes, but it is shaping inbound transfers to my server. >YOu''re not doing any other sort of Ingress filters are you?? No >I dont care about destination port. That line was commented. BUT, incoming transfers are being shaped for some reason. >Could this be shaping on the ISP side?? What >happens when the tc rules >are shut off?? No, everything works fine

Hi, I am using the following script to limit my outbound traffic. This scipt runs on a box behind my firewall. It limits my outbound passive ftp traffic to 39K perfectly....just like i want. However, i just noticed that it is also limiting uploads coming to my server. Is there something I can change to make it not limit uploads to my server? #!/bin/bash #shaping passive ftp traffic # mark the

Hi, I have tried unsuccesfully to limit my ftp server send speed in linux. I have an ipcop linux firewall/router with 2 nics. 1 nic (eth1) is connected to a 3mbit/384Kbit cable connection and the other (eth0) a switch. Behind it i have a suse linux box and a windows box. On the suse box i run proftpd. I need to shape my passive ftp send speed to 34KBytes because if it is maxed out at 45K

Hi, I am using the following script to limit my outbound traffic. This scipt runs on a box behind my firewall. It limits my outbound passive ftp traffic to 39K perfectly....just like i want. However, i just noticed that it is also limiting uploads coming to my server. Is there something I can change to make it not limit uploads to my server? #!/bin/bash #shaping passive ftp traffic #

Well it appears i have no clue what im doing. I thought i had the below script working to shape outbound ftp traffic....however, it is shaping inbound traffic too. I have NO clue why. Please comment if anyone has any ideas why this doesnt work. I want to shape only outbound ftp traffic and not inbound or lan traffic. #!/bin/bash #shaping passive and active outbound ftp traffic on an

Hi, I just wanted to share my script with the list. I have been trying to shape outbound passive and active ftp traffic without affecting inbound and lan transfers. I have tried to do this for a long time and it seems that I have finally figured it out. Feel free to comment on the below script if there is anything that can be improved. It seems to work flawlessly so far. #!/bin/bash

Will the following rules work to mark and shape OUTBOUND ftp speed (passive ftp ports 50000-60000) on my linux server? I want to be able to run these commands on the actual computer that is running the ftp server. iptables -t mangle -N MYSHAPER-OUT iptables -t mangle -I POSTROUTING -o eth0 -j MYSHAPER-OUT iptables -t mangle -A MYSHAPER-OUT -p tcp --dport 50000:60000 -j MARK --set-mark 1 tc

I am trying to mark outbound passive ftp traffic with iptables and shape it to 35KBytes. I am using the following script on the computer that runs the ftp server. It is not working correctly, it seems to limit ALL traffic. Cant file share or anything. Anyone might know what is wrong? #!/bin/bash #shaping passive ftp traffic # mark the outbound passive ftp packets on ports 50000-51000

I am currently running the following script on an internal machine to shape outbound ftp and email traffic. I am trying to move the script to my nat router (ipcop with 2 nic cards) so that it shapes the whole network and not only the outbound of 1 box. I have cable modem -> ipcop (eth1) >(eth0 - 192.168.1.1) > 192.168.1.100 and 192.168.1.101. The scripts works great running on

I am trying to mark outbound passive ftp traffic with iptables and shape it to 35KBytes. I am using the following script on the computer that runs the ftp server. It is not working correctly, it seems to limit ALL traffic. Cant file share or anything. Anyone might know what is wrong? It seems that I might need to add a ''lan limit'' so all traffic that is not marked still

Hi, I am currently using a script to shape my outbound ftp traffic. Works great except for 1 thing. When a user goes to list a dir, the listing is also getting shaped. This causes dir listings to be very slow. Is there a way to differentiate the dir listing packets? Here is a my current script: #!/bin/bash #shaping passive and active outbound ftp traffic on an internal computer without

Hi, I am using the following script to limit my outbound traffic. This scipt runs on a box behind my firewall. It limits my outbound passive ftp traffic to 39K perfectly....just like i want. However, i just noticed that it is also limiting uploads coming to my server. Is there something I can change to make it not limit uploads to my server? #!/bin/bash #shaping passive ftp traffic #

Hi, I am trying to use the following script to limit my passive ftp traffic to 35KBytes. Problem is, it kill''s the entire connection on that computer. The script is running on the same machine as the ftp server. I was hoping to limit the ftp traffic, and only the ftp traffic, leaving the computer. It seems to limit everything, i tried transfering a file with samba and the whole

I''m looking for a way to shape all traffic on a virtual vlan interface, say eth1.100 to a max of 100mbit. The box is a quagga router with eth0 on the inside and vlan interfaces on the eth1 card to our upstream partners. Each partner has his own vlan on eth1. I tried shaping but was only able to shape outbound traffic on the eth1.100 interface. Inbound shaping was also possible, but

Ok, i think i found the problem. The script below seems to be working. I need to do some testing now. Thanks for all the help in here. If anyone has any enhancements, feel free to comment please. #!/bin/bash #shaping passive ftp traffic # mark the outbound passive ftp packets on ports 50000-51000 iptables -t mangle -D POSTROUTING -o eth0 -j MYSHAPER-OUT 2> /dev/null > /dev/null

Hi, I am trying to figure out how to shape the following marked packets and limit them to a speed on 30KBytes. I have read the documentation but I am unsue of what to do. iptables -t mangle -A FTP-OUT -p tcp --dport 50000:51000 -j MARK --set-mark 1 Mark _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc

Hello all, this is my first post here. Sorry for my english. Gentoo LAN router, 2.4.26-hardened-r2 There are 2 WAN links, one LAN link. I am doing some iptables/routing/tc magic in my scripts. What''s interesting is marking packets traveling from all IP''s in LAN. Interesting commands are: ------------- for ip in `seq 50`; do $IPTABLES -t mangle -A FORWARD -o eth2 -d

Hi I am using traffic shaping on br0 and working nicely. Only problem is when I nat off br0 with a third nic I run into the following problems when traffic shaping: Wondering if anyone has had success with the following layout??? ______br0(eth0,eth1)---------eth1 --- local network | | (public address)

Hi, I have a basic router that is shaping traffic, and it seems to be working at the moment. We have a 100Mbit connection to the internet, however we get charged for each mbit that we use and so have to shape/limit the traffic to avoid huge bills and my boss getting cross!! We have a /29 subnets set up as follows: tc qdisc add dev eth0 root tbf rate 0.8Mbit latency 50ms burst 10k tc qdisc add