similar to: htb.init issues

I have some problem with traffic shaping on debian testing. I actually posted a full config on the list a while ago but didn''t get any answers. The problem is that traffic doesn''t get into the user classes (~150) when I associate a class with a qdisc. I tried sfq, fifo but none works. If I dont''t associate a qdisc with a class classification occurs well.

Hello! I have an internet connection of 64kbps garanteed in a channel of 256kbps. On this connection the metropolitan speed is 10Mbps and in the provider''s network the speed is 100Mbps. I have a few clients behind my linux box and i want to set up some limitations because some of them are using it irrational. I am marking the packets with 0 for internet; 1 for metropolitan 2 for

Hello all, I am providing broadband service through DVB circuit. I have 4KB uplink and 32KB downlink. I want to share 32KB downlink bandwidth among 192.168.0.0/24 (20 users in this subnet i.e 192.168.0.2-192.168.0.22)subnet where each user will get 2KB to 6KB bandwidth. And from 4KB uplink bandwidth each users will get only 1KB to 2KB bandwidth.

Hello to all people there . Can i guarantee ICMP respond time no metter how loaded is internet line . i have typical NATed enviroiment like External IP |linux router| LAN - 192.168.0.0/24 i have example setup with IMQ but is it possible to be done also if i attache htb to eth0 and eth1 for example . if i start shaper ping i better that without shaper but it''s not guarantted i mean

Hi all, I have installed 2.4.5 kernel, Debian Potato. my tc script: #!/bin/bash tc qdisc add dev eth1 root handle 20: cbq bandwidth 10Mbit avpkt 1000 echo root tc class add dev eth1 parent 20:0 classid 20:1 cbq bandwidth 10Mbit rate \ 10Mbit allot 1514 weight 1Mbit prio 8 maxburst 20 avpkt 1000 echo class tc class add dev eth1 parent 20:1 classid 20:100 cbq bandwidth 10Mbit rate \ 5Mbit allot

Hi all, I''ve got a BOX running CentOS 4.5. It acts as a firewall + router. I have installed both iptables and iproute2. I has 3 network cards. eth0 is connected to Internet (is has an internet ip. pls assume its ip is 1.2.3.4/29). it is a 256 Kbit link. eth1 is DMZ. its ip is 192.168.100.254 eth2 is LAN. Its ip is 192.168.101.254 I have alreday shaped traffic to 64 Kbit on eth1 for

Hello Everybody, I am successful in throttling down the Bandwidth to 8kbit using HTB. Below that I get report to change r2q. I want to bring down the Leaf class Bandwidth to 3kbit. My script is as below: Tc Script to throttle down the Bandwidth to 8kbit based on MAC address and IP address tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1:0 htb default 30 r2q 1 tc class add

Hi Guys, I have a little problem i dont understand why its happening, Initially i thought it was a network problem, but then i made a crossover between me and the server and shaped on that interface with as minimal as possible config this my test: $TC qdisc add dev $INTERFACE root handle 1: htb default 30 $TC class add dev $INTERFACE parent 1: classid 1:1 htb rate 10Mbit # POOL1 $TC class add

Hello, Besides a very good functionality, I have a small, yet stressing, problem. Let''s say I have a bandwidth of N bits. I have X clients, everyone with his fixed bandwidth. I create htb qdsics for each client. Each leaf has sfq queueing discipline. A sample config would be like this : tc class add dev eth0 parent 1:2 classid 1:346 htb rate 32Kbit ceil 32Kbit burst 4k

Lartc readers I have a peculiar problem with shaping and firewalling. My tc rules work great, below is a smaller version: #Root tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1: htb default 100 #Root Class tc class add dev eth0 parent 1: classid 1:1 htb rate 1024kbit quantum 20000 burst 15k #Class for each user tc class add dev eth0 parent 1:1 classid 1:2 htb rate 32kbit ceil

Hello, I wrote a simple traffic shaping script (below) that should have allowed me to shape my internet traffic a bit (ppp0 - adsl 128kbit/64kbit; local interface eth0). The script works only partially - the speed is being limited but too much. Without running this script my download rate is about 10kBytes (with second computer also downloading at about 6kBytes). After running it my download speed

Hello, I run one of my PCs as my personal router, with iptables+tc to control traffic and be my firewall. In TC, I use a combination of htb, qdisc and sfq (as well as prio) to classify bandwidth. In my current setup, I have 10 classifications of my bandwidth. (Even I admit this is probably more than I need, but at this point I''m still learning, so I''ll just leave them be.)

Hi, I have some interesting problem with htb , I set up root class and sub-classess: $TC qdisc add dev eth0 root handle 1: htb $TC class add dev eth0 parent 1: classid 1:1 htb rate 1990kbit ceil 2000kbit $TC class add dev eth0 parent 1:1 classid 1:10 htb rate 190kbit ceil 200kbit $TC class add dev eth0 parent 1:1 classid 1:11 htb rate 1400kbit ceil 1600kbit $TC class add dev eth0 parent 1:1

Hello all, I am trying to match some conections using u32 but I tryed this: [root@ns1 ~]# tc filter add dev eth1 parent 1:0 protocol ip prio 1 u32 match ip src 0/0 match ip dst 0/0 match ip sport 80 0xffff flowid 1:10 RTNETLINK answers: Invalid argument We have an error talking to the kernel [root@ns1 ~]# I have this class at device eth1: [root@ns1 ~]# tc class show dev eth1 class

please, help, i have build vpn server (suse 9 + poptop), i have managed to implement tc htb in ip-up script, but every client has own ppp interface (ppp0, ppp1, ppp2...), and my idea is to share available bandwidth, not to limit connection, how to build root tc rule, when I have more then one interface?... please any one width experiance regards _______________________________________________

Hello guys, I past the last days trying to configure my shorewall 4.06 firewall to allow openvpn bridging connection. My scenario is the following: roadwarrior (openvpn client) -------------> Internet ------------> (X.Y.W.Z - eth0) Firewall/Gateway (10.x.x.254 - eth1) --------> Local Lan -------> OpenVPN Server (10.x.x.249 - br0) where 10.x.x.0-254 is my private lan X.Y.Z.W is

hi all: the following scipt is wokring perfectly with limiting ...on limimitng per ip basis.. ---- eth0=public static ip eth2= private ip ( 192.168.2.1) -- iptables -t mangle -A POSTROUTING -s ! 192.168.0.0/32 -d 192.168.2.101/32 -j MARK --set-mark 21012 tc class add dev eth2 parent 1:1 classid 1:2101 htb rate 32kbit ceil 64kbit tc filter add dev eth2 parent 1:0 protocol ip prio 2 handle

>Miguel Ángel Domínguez Durán wrote: >> Hello again, >> First, excuse me for my poor english. >> I''m trying now to make bandwith control in a firewall machine running >> Shorewall. This machine is also a bridge using bridge-utils >> bridge-utils-devel. It is a mandrake 10. The configuration is something >> like >> this: >> >>

Hello. I''m newbie with QoS. I read some articles and I have a question on You. If you have time to spare, it would be great if you reply. Here is my problem. I''m on wireless network(no earnig comunity). We got 2/2Mbit(soon 4/4) for 100 people(sharing link). Not long ago people start screaming that their games don''t work good(lagging). So I add to our qos class games

Hi folks, I`ve a problem to use HTB and SFQ. The first script, below, to show a simple configuration, does work fine...!!! But, in the second example, does not work, becouse i put more code to clasify the traffic by protocol, http and ftp in this case. Somebody can tell me the errors? Thx, in advance.- NOTICE: IMQ device is to asociate with ETH1 my external iface. SCRIPT que funciona: