similar to: HTB statistics

Dear all, I have some problems to install R-2.4.1 on AIX 5.3. Configure string: ./configure --with-readline=no LDFLAGS='-bshared' --with-jpeglib=no --with-libpng=no --with-lapack=no --prefix=/cineca/prod/Bioinf/R-2.4.1 configure .site= #! /bin/sh CC=xlc F77=xlf MAIN_LDFLAGS=-Wl,-brtl SHLIB_LDFLAGS=-Wl,-G CXX=xlc CXXFLAGS=' -g -O' SHLIB_LDFLAGS=-W1, -G MAKE=gmake Configure ends

What exactly happens if the sum of the children classes rate is bigger than the parent''s? What if the majority of these classes are using less than the minimum rate established (eg. 0kbps)? -- Marco Casaroli SapucaiNet Telecom +55 35 34712377 ext 5

Hi i have huge traffic going to internet at this moment iam using cisco to do QoS after reading lartc i would like to shift the setup to linux can you any one tell me i have 45mb internet make 40mb for all traffic, and 5mb for voice if Voice not used 45 MB for Data any sample configuration , or example will be good to start with becoz its very high traffic .. so suggest me what server

Hi, I''m getting this warning/error in /var/log/messages: May 26 18:21:05 mail kernel: HTB: quantum of class 10010 is small. Consider r2q change. Its a big deal? What should I do? Many thanks Oliver -- Oliver Schulze L. <oliver@samera.com.py>

re can somebody tell me what am I doing wrong (at this late night hour), because vlan are not getting bridged at all. ifconfig eth0 0.0.0.0 up ifconfig eth1 0.0.0.0 up brctl addbr br0 brctl addif br0 eth0 brctl addif br0 eth1 ifconfig br0 up vconfig add br0 X vconfig add br0 Y X = vlan-ID (example: 222) Y = vlan ID (example: 223) # brctl show bridge name bridge

I use dChip and Affymetrix gtype to apply some genotyping functions to some microarrays data. Do you know if similar R functions exist? Thank you! Francesco ----------------------------------------------------------- Francesco Falciano, Ph.D. CINECA (High Performance Systems) via Magnanelli, 6/3 40033 Casalecchio di Reno (BO)-ITALY tel: +39-051-6171724 fax: +39-051-6132198 e-mail:

Hi, I have a Debian based NAT router. How can I manage upstream egress bandwidth based on the LAN ipadress in the network below? My goal is that host1 get a minumum of 10Mbit up/down and host2 gets a minimum of 90Mbit up/down, both max 100Mbit up/down? targethost 172.16.255.254 | | 172.16.0.1 natrouter

Hi everybody! I''m using an edge bridge box with two ethernet cards to shape traffic in a WAN link. I''m running Debian 3.1 stable with kernel 2.6.8 and iproute from packages. I recompiled the kernel with the following built-in options: [*] 802.1d Ethernet Bridging [*] QoS and/or fair queueing <*> HTB packet scheduler <*> SFQ queue [*] QoS support

[Please keep message on the list] On Mon, Sep 30, 2013 at 12:58:38AM +0200, Roberto Innocenti wrote: > [libguestfs on ppc] You should be able to compile from the latest source on ppc64, since I spent some time a few weeks ago getting it to work: http://comments.gmane.org/gmane.linux.redhat.fedora.virtualization/2268 Start with git (not 1.22), read the README file, and let us know on the

Hello Peter & Jeremy, I've found an ordinary desktop PC (with Phoenix Award BIOS 6.00PG) that won't boot off a USB stick created by livecd-tools-024 with syslinux (tested both versions 3.75 and 3.81). The boot process drops to the "boot:" prompt with an error message: could not find kernel image: linux The same USB stick boots fine on any other computer I could find.

here''s the output : # tc -s -d class show dev eth0 class cbq 1: root rate 10Mbit cell 8b (bounded,isolated) prio no-transmit/8 weight 10Mbit allot 1514b level 2 ewma 5 avpkt 1000b maxidle 23us Sent 294 bytes 7 pkts (dropped 0, overlimits 0) borrowed 0 overactions 0 avgidle 605 undertime 0 class cbq 1:10 parent 1:1 leaf 10: rate 100Kbit cell 8b prio 1/1 weight 100Kbit allot 1600b

Hi, I would like to prioritize VOIP traffic when we use the phone, but other times not do traffic shaping at all. Right now I have my openwrt router set up with htb to do shaping. In order to get it to work well I had to set my upload and download speeds much lower than my line speed. With these settings, I get good VOIP reception even while surfing the net and doing a long download. However,

Hi All, I''m using iptables-1.2.7a on RedHat8 kernel 2.4.20. I wanted to limit the file-sharing traffic to the internet. I marked the packets with iptables: iptables -A FORWARD -t mangle -p tcp -s 192.168.1.1/24 -d ! 192.168.1.1/24 --dport 1024:1862 -j MARK --set-mark 1 iptables -A FORWARD -t mangle -p tcp -s 192.168.1.1/24 -d ! 192.168.1.1/24 --dport 1864:65535 -j MARK --set-mark 1

Hi all, I am trying to download, decompress and read a csv file. My code: myurl <- "ftp://ftp.ncbi.nih.gov/pub/geo/DATA/supplementary/series/GSE24729/GSE24729_MitoNuclear_suppl_male_stats.csv.gz" # myfile <- "GSE24729_MitoNuclear_suppl_male_stats.csv.gz" # download.file(myurl, destfile=myfile, mode="w") # mycon <- gzcon(gzfile(myfile,

Hi, I have implemented QOS classifiers using TC with HTB. The classification is working. I would like to know whether there is some tool which will help me in monitoring the bandwidth share of the various classes. Thanks, Vinod C

On 31.05.2013 07:05, vikrant verma wrote: > Hello Michal, > > Throttling is working now after setting inbound.average = 10 (i have > set other values to 0 ) > But i am observing an inconsistent behavior in the observed throttling > bandwidth > > when i set inbound.average = 10 , i observed bandwidth of 24 kbps > when i set inbound.average = 100 , i observed

Hello, I''ve just compiled the kernel 2.6.17 and noticed an odd HTB behaviour. For instance: tc class add dev eth0 parent 1:1 classid 1:30 htb rate 1kbit ceil 750Kbit burst 15k tc filter add dev eth0 parent 1:0 protocol ip prio 15 u32 match ip dst 192.168.5.1 classid 1:30 The filter works ok and the traffic to 192.168.5.1 flows through the class 1:30, but the rate gets much higher than

Hi all, I have been getting some strange results with HTB in kernel 2.6.11, and was wondering if anybody could give me some advice. Also, if someone could direct me to the changelog for the recent versions so I can see if it is worth upgrading? Anyway, the problem can best be summed up by looking at the output of ''tc -s -d class show dev eth0''. Some of the relevant results

On 27.05.2013 12:36, vikrant verma wrote: > Hello Michal, > > I am using the following code - > > virDomainSetInterfaceParameters(dom, "vnet0", networkParainfoPtr, > nparams,0); > > before calling this i am assigning the following Inbound values > > inbound.average = 10 (10 kbps) > inbound .peak = 10 > inbound.burst = 10 I suspect this way too

Hi, I have a default class for my un-marked traffic (prio 5) and a prio 0 class for the important stuff, but I do not understand why my download traffic is duplicated in both. It work fine for my upload traffic (same setting except the red class but I have the same result if I create an esfq instead). Any comments/information will be appreciated. Below my config : tc commands from my scirpt :