similar to: Archives and question

Hello list, I am in the process of switching from IPCOP to Shorewall s the firewall for our small office. I very much like the fact that Shorewall runs on top of the same OS (openSuSE 11.4) that I run on the server and my desktop. Our setup is fairly straightforward. We have 8 static ip addresses from our ISP, which provides a cable modem and a Cisco 800 series router. The ip addresses are

Hi all I need to use three 512 kbps aDSL internet connections, in a load-sharing, link-failover scenario. Presently I am using Ipcop with a single DSL. Now, I seem to have two options...one..an Edimax quad wan port adsl router, with firewalling and NAT and second install a minimal linux distro for routing...something on the lines of LARTC....and keep NATTING, IDS & Firewalling on the linux

Hello everyone, I hope this is on-topic for the list... I''m familiar with NAT, but I can''t see how to route a fully routed LAN. My new ISP has given me a /29 (I understand this to be 6 addresses + network address + broadcast address) which I would like to use, as multiple PCs here want to use p2p and games at the same time, and reconfiguring the port forwarding all the time

Hi, I have tried unsuccesfully to limit my ftp server send speed in linux. I have an ipcop linux firewall/router with 2 nics. 1 nic (eth1) is connected to a 3mbit/384Kbit cable connection and the other (eth0) a switch. Behind it i have a suse linux box and a windows box. On the suse box i run proftpd. I need to shape my passive ftp send speed to 34KBytes because if it is maxed out at 45K

Hi, I''m a relative newbie to LARTC but I have read Matthew Marsh''s book and lurked on this list for a while.... I still seem to be missing a few key ideas here.... So... Maybe folks on the list will be kind enough to help. I have two different ISPs. Cogent and Bell. I have three different firewalls (2 PIX and 1 IPCop). And I have an Ubuntu Linux box doing LARTC for around

I''m being cast headlong into unfamiliar waters here, and being desperate for some air, thought I''d come here for some help. :) Anyway, my employer is going through some whiplash-inducing growth spurts, and as a result, the simple "Internet T-1 -> Linux Firewall/NAT -> LAN" setup just isn''t going to cut it anymore. First, we''re bringing in 2

Hi list, I have an ipcop 1.3.0 with one regular ip address on its green (internal) interface 172.25.0.1 with one subnet 172.25.0.0/22 related to it. In addition I have assigned two further ip addresses 172.25.64.1. and 172.25.68.1 to right that green network card with two respective further subnets 172.25.64.0/22 and 172.25.68.0/22 related to each for certain reasons. Now I want to force all

I hope that Marc doesn't mind, but I felt that part of his recent post was important enough to deserve it's own subject line rather then being lost in a 60-msg-long thread... On Sun, Jan 11, 2009 at 10:08 AM, Marc Schwartz <marc_schwartz at comcast.net> wrote: ... I strongly believe that the comments regarding R and the FDA are overly negative and pessimistic. The hurdles to

I want to trigger fetchmail when a user makes a pop-3 request. The reason for this is so that the messages retrieved by fetchmail can be filtered via an anti spam service before depositing them into the inbox. The way I figure it, since I need to know who the user is and that they authenticated in order to make the correct fetchmail call, I need to spawn the fetchmail process somewhere

Hi, I just installed wondershapper 1.1a on my ipcop firewall box. I have roadrunner cable with a ftp server setup. My download speed is 2mbit (I get 225 KBytes) and my upload is 384kbit (I send at 43 KBytes). What should the settings in wshaper? I can ping yahoo.com at 90msec with little traffic.....and at around 220msec with full upload traffic. Mark

On Mon, Jan 12, 2004 at 02:11:38PM +0100, Ralf Petry wrote: > more or less just a general question: i am running a suse linux 8.1 as > a server and ipcop 1.2 (and at another place ipcop 1.4) as > firewall/router. > i would like to achieve the following: allow a certain company (with > windows server and clients) to connect > to my network via vpn. where would i set up tinc? on

Hi, I am trying to use two products that use SysLinux and finally realised the SysLinux is the cause of my woes. I'm trying to use Freesco and IPCop. IPCop version 1.3 used a different boot loader to 1.4 which uses SysLinux. I have been through numerous trials and tribulations in trying to get Freesco to work but eventually gave up and went with IPCop. I kept getting the "Boot

I know a lot of you are using IPCop where you work. They have three (3) updates posted, during the past two (2) days. The last one, I'm getting an error, when I try to Download it, and I will report that to the IPCop list or bugzilla after I send this message. "No such file or directory http://prdownloads.sourceforge.net/ipcop/ipcop-1.4.21-update.i386.tgz.gpg?download" The problem I

Hi all. I fear I''m slightly offtopic with this question, but I''ll keep it short: who is (or feels) responsible for the #lartc irc-channel in oftc.net? I''d appreciate if that person would get in contact with me (off-list) in order to discuss some ideas I have. Thanks in advance. Bye, Mike _______________________________________________ LARTC mailing list /

Hello everybody, for just one week I try to install three servers on an OpenSuSE 10.3 dom0 equipped with 4 NICs. One server is an OX using the onboard NIC via xenbr0. This server runs!! For my IPCop server I intended to use the three remaining NICs (Intel Pro100/S, 3Com 3C590, Realtek RTL-8139). These three NICs should be used natively by my IPCop. So I tried to use the pciback driver. I wrote a

Hi all I am a small business user running my IT infrastructure on Whitebox linux (RHEL3 clone), with ADSL connectivity with a static ip, using the ipcop firewall gateway (www.ipcop.org). I run my own web/mail server as my website usage is not much and I cannot afford to lease a dedicated server on the net, and leasing a shared server...I lose control. My DSL is prone to frequent outages and

I have purchased a used Compaq DL360 which I was going to use as a proxy server. Presently, we are using a cheap box with ipcop which is working fine but it didn't have much RAM (64MB), etc. This new box we will want to run squid and perhaps dansguardian for filtering (this is a non-profit company) and I'm wondering if I should just put ipcop on it or would it be smarter/better to install

Hello again, First, excuse me for my poor english. I''m trying now to make bandwith control in a firewall machine running Shorewall. This machine is also a bridge using bridge-utils bridge-utils-devel. It is a mandrake 10. The configuration is something like this: FTP/Webserver ------| eth0 eth1 Mailserver

I run VMWare server 1.07 on Centos 5. Last night I left a Windows 2000 virtual machine doing a ClamWin scan of drive M: when I went to bed around midnight. Drive M: is actually a volume on the Centos 5 host, mounted via Samba. It has about 40Gb of photos on it, plus a few other things. I had the VM up visible in the VMWare Server Console running under KDE on display 8 (X session #1), my

On Mon, 2015-06-29 at 08:17 -0700, david wrote: > <snip> > > > >Yup. For, um, about a dozen years, I ran RH 7.1,7.2, 7.3, and eventually 9 > >on an old box that was nothing but a firewall router. I was seriously > >paranoid - no gcc or any development tools, no X, not much of anything. To > >the best of my knowledge, we never had a breakin. > > >