similar to: Doubt regarding priority of classes with HTB

Hi! I am making some tests here, and i wanna miror all the traffic going to a ip from one interface to another ip. example: all packets going to 64.223.167.100 should be transmitted by ppp0 to internet and by eth2 to the adress 192.168.1.100. Someone know how can i do it using iptables or ip route/ip rule? Tks in advance! Fernando Favero _______________________________________________ LARTC

Hi! I have read all informations i could find, but some things are still not clear. My setup is: ---INTERNET1(eth0)-\ /- Local net1 (eth2) GW ---INTERNET2(eth1)-/ \- Local net2 (eth3) I have NAT and a working setup using HTB,SFQ, classifying with the iptables -j CLASSIFY way. I shape only the traffic coming from the internet heading to the intranet. I would like

I have: tc qdisc add dev imq0 root handle 1: htb default 30 tc class add dev imq0 parent 1: classid 1:1 htb rate 512kbit ceil 512kbit tc class add dev imq0 parent 1:1 classid 1:30 htb rate 64kbit ceil 512kbit then: iptables -t mangle -A PREROUTING -i ppp0 -s 192.168.2.2 -j IMQ --todev 0 tc class add dev imq0 parent 1:1 classid 1:22 htb rate 64kbit ceil 128kbit tc filter add dev imq0 protocol

Hi , I''m trying to call the tc_qdisc_modify function of tc in iproute2/tc. I could compile it with my stub program and got the executable. However, when i try to create an htb qdisc i get the following error : Unknown qdisc "htb", hence option "default" is unparsable However, if i use the tc tool, it works fine.. When I tried to understand the problem, it appeared to

Folks, I am a little bit confuse in how to put these packets into correct mangle table for traffic shaping. This is what i ve planned to do: - - - - :eth0 [ LINUX-BOX ] eth1: - - - - Let say: eth0: 220.100.1.1 eth1: 192.168.1.1 eth1:1 192.168.1.2 192.168.1.0/24 get natted into 220.100.1.1 before reaching the internet. I put every packets coming from internet (eth0) this way: # iptables -t

Hi, I would like to know how to specify the token rate when a tbf qdic is created using tc tool.. Will it be a default value when tbf qdisc is created? This could be a silly question.... im quite new to all these stuff.. but im really interested.. any help will be most appreciated... thanks in advance, sanjeev -- ______________________________________________ Check out the latest SMS

Hi, I''m wondering if there''s any simple solution. This problem looks very simple, so maybe there''s a simple solution that I''m missing, but I couldn''t do it yet. I''m configuring an wireless ad-hoc network with three laptops; A ---- B ---- C where A and C can only talk to B, and B can talk to both A and C. A and C cannot talk to each

Dear all My current setup is the following: Normal Hosts --------+ eth0 eth1 | +----------+ +-<->| F/W box |--<-> Internet | +----------+ High priority hosts--+ My eth0 is a normal 100MBps LAN and my Internet connection is a 1Mbps ADSL line. What I want to achieve is to have normal hosts to share a big

Hi folks, first of all, sorry for my bad English ^^ and for the fact that I am a Linux N00b. I have a little Problem installing TCng on my Debian System. At the make install command the following error occured: tar: lib/tcng/include/klib/kernel/include: Cannot stat: no such file or directory tar: Error exit delayed from previous errors Can somebody help me ? greets Marcus -- GMX im TV

I use the wellknown nano setup (by Christoph Simon) on a few sites with success. From time to time a user approaches me with problems that seems to originate from the fact that only trafic to the samt DST IP on the net will get out the same link. The problem happens with traffic from applications that contact different IPs in the "same session". An example is Anarchy Online, where

Hello, I''m a total tc newbie, and I''m trying to tweak the wondershaper script (http://lartc.org/wondershaper/) to get a slightly different result. Excuse me if I will not use the correct technical terms, it''s a whole new world to me :) wondershaper.htb creates 3 HTB classes; 1:10 is high prio, 1:20 is bulk (default), and 1:30 is low priority. The classes are

Hi guys, i have a problem with a configuration what i''m trying to do. I have two computers with linux, A and B, connected in the same network with this configuration: PC1 A: 192.168.192.1 PC2 B: 192.168.192.30 The PC1 A is a firewall doing nat... this one is connected to the internet via an adsl modem and of course it have its own public ip , and the router B is a smtp server but

Hi, I am the network administrator of my company, I know quite well Windows networking and a few about Linux and its amazing routing and QOS capabilities. Right now, we have a bustable T1, which mean that the bill increase with out T1 use. I have decided to find a way to shape the traffic so I can stay at a raisonable speed of 256 kb/s (Up/down) on my T1. I have linux gateway with 2 nics behind a

here''s the setup (two dsl - same provider) +-----> link1 LAN----- linux box --| |----------internet +-----> link2 the setup is ok in terms of the failover requirement. the other link takes over when one is down. however, there is a very noticeable lag when both lines are up. i''ve tried changing

Hello, I was wondering who owns the clang.exp bots which builds llvm using gn? I need to add another generator to clang-tablegen, but the build seems to be failing: http://lab.llvm.org:8011/builders/sanitizer-x86_64-linux-gn/builds/4816 I'd appreciate it if someone could take a look at the problem. Thank you, Nandor Licker

Hi guys, Can you take a look at this? :) +-----------+ | | eth1-|- | | -|-eth0---LAN--- | | eth2-|- | | | +-----------+ - eth0 is connected to the LAN having the IP=LAN_IP eth1 is connected to the first ISP having IP=ISP_IP_1 and GW=ISP_GW_1 eth2 is connected to the second ISP having IP=ISP_IP_2 and GW=ISP_GW_2 I need

Hello! I have a quite complicated setup. In my network on each interface there is bandwidth limitation for each user. Booth outgoing (on interface itself) and incoming (attached IMQ) traffic. There is main HTB class which limits bandwidth for whole interface and HTB subclasses for each user. Filtering is done with hashing filters. This setup was working correctly. But now in the network I

On Wed, Oct 12, 2016 at 07:15:39PM +0100, Renato Golin wrote: > On 12 October 2016 at 18:37, <sylvain.bertrand at gmail.com> wrote: > > Suggestion is not clear answer. How such a decision taken? Is there a board of > > people which have to vote to valid the choice of minimal gcc (and clang) version > > effective? > > We don't have such process, unfortunately.

Thanks for your reply. I searched for the error on Google before resorting to the R forum (help group). I tried Sys.env(...) too, but didn't resolve the error I get. Hence I am looking for solution. -- -----Original Message----- From: Thierry Onkelinx [mailto:thierry.onkelinx at inbo.be] Sent: Thursday, February 01, 2018 10:57 AM To: Sariya, Sanjeev <ss5505 at cumc.columbia.edu>

Hi, I was trying to download the Crossbow ISO from : http://opensolaris.org/os/project/crossbow/snapshots/ under "Crossbow Beta iso images June 6 2008" and it failed. Does anyone know of a link which is working ? Thanks for any pointers ! Regards, Sanjeev.