similar to: traffic routing

Hello Everybody, I am successful in throttling down the Bandwidth to 8kbit using HTB. Below that I get report to change r2q. I want to bring down the Leaf class Bandwidth to 3kbit. My script is as below: Tc Script to throttle down the Bandwidth to 8kbit based on MAC address and IP address tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1:0 htb default 30 r2q 1 tc class add

Hello All, I am trying to prioratize VOIP traffic from data. The follwing link says that HFSC is better than HTB for shaping VOIP traffic. http://www.voip-info.org/wiki-QoS+Linux+with+HFSC I am in search of good documentation to start with HFSC, I am unable to understand the parameters used. I "googled" a lot to find on how to use HFSC, but no luck. Can anyone of you get me a link To

Hi, If you are running brctl tool on the linux box then there is a command that will automatically determine the number of MAC addresses in the network #brctl showmacs <bridge name> <port number of ur lan interfce> grep -v -w port | wc -l Ex: #brctl showmacs abcd 1 grep -v -w port | wc -l Note that, for this to work your box should be confogurred as a bridge in promiscuous

Hi, If you are running brctl tool on the linux box then there is a command that will automatically determine the number of MAC addresses in the network #brctl showmacs <bridge name> <port number of ur lan interfce> grep -v -w port | wc -l Ex: #brctl showmacs abcd 1 grep -v -w port | wc -l Note that, for this to work your box should be confogurred as a bridge in promiscuous

Hello Stef, I am working on a Bandwidth management project as part of my college curriculum.I am running TCNG 10-b but I am not able to classify packets based on MAC address using tcng, so I am running tc commands in /tcng/bin and they are working. But is there a way out to classify packets based on MAC address using TCNG. And, I am successful in throttling down the Bandwidth to 8kbit

I am using samba 3.0.7 on Ferdora Core (2.6.5-3) I performed the following operation at the client side mount //abc/abc_share /xyz cd /xyz mkdir pqr where "abc" is the remote server "abc_share" is the remote share "xyz" is the local directory What I want to know is, at the last statement, when an "mkdir" is given, exactly which function at the

Dear All, Hii, I am student working on a project called Network Radio modelled on the icecast project. Could u plz give me the design of Icecast project>>so that i can model my project accordingly viz by threads or sockets?? Plzz help me. Also could u telll me where i can get the source code for icecast in c++ or java. Thanks, Chetan Yahoo! India Matrimony: Find your life

Hello All, I have a linux box running with three NIC''s, I have used brctl tool to configure this box as a bridge, i have given it ONE logical ipaddres, Every thing is working fine, but now i am required to configure the same bridge as a LOAD BALANCER.... On some googling i found the following link http://lartc.org/howto/lartc.rpdb.multiple-links.html This HOWTO requires me to have one

Hi Gabriel, I m trying to author a test suite for video codecs. Can you guide me how to go about it? I need some ideas to get started with. Thanks Ramu Can u reply for this mail. --------------------------------- Yahoo! India Matrimony: Find your partner now. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello Everybody, I have configured a Linux box that does traffic shaping. Its working wonderfully fine, just as expected...Now i want to measure the bandwidth consumed by each of my hosts....But I dont want SNMP to run on all the hosts[as required by MRTG] I used iptraf on my linux box, but it only measures the bandwidth on interface basis only.... I tried installing traffic-vis, its not working

Hello, there''s a problem I''ve had for several months now, and I''ve never been able to find an answer to it. I''ll try to explain as quick as possible: I have a server that controlls my home network, it provides internet to them also (NAT) and I would like to provide QoS by shaping traffic. I have a p2p server here (running mldonkey), since only that

Hi, I''m using following rule in /etc/shorewall/rules REJECT:ULOG:P2P loc net ipp2p:all ipp2p iptables -L : Chain loc2net (1 references) target prot opt source destination ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ULOG all -- anywhere anywhere ipp2p v0.8.2--ipp2p ULOG

Hello all, I am having some difficults to make a routing rule work. I want that every P2P packages go to one interface (eth2 - cheaper link) nad the rest of the traffic go to another interface (eth0 - frame relay very expensive). I am using this script to make the mark and balance: ------- #!/bin/bash IPT="/usr/local/sbin/iptables" IP="/sbin/ip" #---- # Declara redes #----

Hi guys, I want to priorize traffic comming down from internet on my ppp0 int I want port 80 and 21 (and others ) to have preference over P2P traffic, I don''t want to bann P2P just give to it less prio than other more vital services... does anyone know how to do it or where to read on. Thanks in advance

Hi, I am Ramu from India, My rails application needs to have sms feature I searched for couple of rails plugins like sms-fu and all. But it seems that none of them has a support to india mobiles. Please help me in finding out the free sms plugin for rails in india. Thanks, Ramu.

After varying degrees of success with p2p detection modules, I would like to write the following rules using iptables to reliably identify p2p traffic: 1. If a host on the network has 5 or more simutaneous tcp connections to ports above 1024, mark all connections to ports 1024 and above as 60. 2. If a host has received (or sent) UDP packets from 5 different hosts'' ports above 1024 in a

Hello, Could somebody explain following issue ? I set up htb class on outgoing external interface to shape p2p upload traffic. I limited it to 4Mbit/s. I also set up iptables counters chains in FORWARD chain to calculate traffic generated by p2p and others. While tc stats show that p2p shaping class keep defined 4Mbit traffic, iptables counters show me that p2p traffic exceed traffic to 150%

Hello, http://www.tinc-vpn.org/examples/redirect-gateway/ explains how to set up a default route using tinc. However, in my understanding tinc's p2p traffic is routed via tinc there: Assume a network: Client A, Client B and a Server S. A and B have "ConnectTo S" in their config, S is used as a gateway providing 0.0.0.0/0 . All packets send from A to B will be delivered to

In regards to my earlier post, I believe that my problem is that the filter is not matching ssh traffic properly. Here are the rules that I posted earlier, with the filter being the last one: tc qdisc add dev eth0 root handle 1: htb default 3 tc class add dev eth0 parent 1: classid 1:1 htb rate 102400kbps ceil 102400kbps tc class add dev eth0 parent 1:1 classid 1:2 htb rate 102400kbps ceil

Hi, I have made this script, that I use for controlling the bandwidth on a gateway for about 100 computers. It is working quite effectively to limit the use of p2p programs (and other programs), so that you can surf undisturbed. Also, it improves internet access in general, so that one large download doesn''t take up all your bandwidth. I was wondering if someone would like to test it,