similar to: Need help regarding TBF Token rate setting

Hi , I''m trying to call the tc_qdisc_modify function of tc in iproute2/tc. I could compile it with my stub program and got the executable. However, when i try to create an htb qdisc i get the following error : Unknown qdisc "htb", hence option "default" is unparsable However, if i use the tc tool, it works fine.. When I tried to understand the problem, it appeared to

Hi, I''m a bit confused with the priority of different classes with HTB. How it will be? Will the class with lowest no: have maximum priority? Any help is most appreciated, Thanks in advance, Sanjeev -- ______________________________________________ Check out the latest SMS services @ http://www.linuxmail.org This allows you to send and receive SMS through your mailbox. Powered by

Hi, Can you please explain to me the difference between rate and peakrate, in conjucture to TBF. IMHO, rate : controls the no. of pkts flowing through the pipe, and peakrate : controls the no. of tokens flowing through the bucket. A funtion(?) of peakrate and mtu is rate. If this is true, why do I need to specify both peakrate and rate? Regards, suraj. __________________________________ Do

I''m trying to fill a token bucket with enough tokens to burst several gigs of data. However, it doesn''t seem to get any higher than ~3.9GB: >tc qdisc add dev eth0 root tbf rate 1440kbit latency 50ms \ burst 16000000000 >tc qdisc show dev eth0 qdisc tbf 800b: rate 1440Kbit burst 3908420240b lat 2197.8s A smaller attempt of ~1.6 gigs works just fine: >tc qdisc

The manual says (about prio): > Because it doesn''t actually shape, the same warning as for SFQ holds: > either use it only if your physical link is really full or wrap it > inside a classful qdisc that does shape. The latter holds for almost all > cable modems and DSL devices. I want to wrap prio inside of tbf. Here''s why: I have a server on a DSL line, which has

I am using tbf to do bandwidth limitation. i found that when i start passing traffic there is a burst and then the rate goes down to what is configured. is this a known issue or do i need to change some parameters? thanks. --------------------------------- Do you Yahoo!? Read only the mail you want - Yahoo! Mail SpamGuard. _______________________________________________ LARTC mailing list

Quick question: How do I delete an ingress tbf? [root@atlas root]# tc qdisc qdisc tbf ffff: dev eth0 rate 50Kbit burst 2999b lat 1us [root@atlas root]# tc qdisc del dev eth0 ingress RTNETLINK answers: Invalid argument _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Hi all! I just started to experiment with bandwidth management using tbf. I have the folowing problems with token understanding: 1) What unit is token? Is "1 token = 1 byte" ? If this is so, then with rate=0.5mbit and HZ=100 the bucket gets filled with 0,64kb (655 tokens) every 10ms? 2) How much tokens are used for one packet (1500)? 3) And token unrelated question. Does

Hi I''m completely stuck with the tcng language - I assume there must be some way to arrange queues hierachically like eth1 | TBF | PRIO / \ class class but my attempt (below) produces a "inferno.tc:8: qdisc "tbf" has no classes near "prio"" when run through tcc. dev eth1 { egress { tbf (rate 128kbps, burst 64kb,

Hello ppl, I''m playing with the pfifo scheduler, its simple, and i cannot understand what''s wrong. So, i have test machine, with one interface eth0, and i want to send no more than 3 packets/sec out of that interface, so i do: tc qdisc add dev eth0 root pfifo limit 3 And i get pfifo scheduler on eth0 with limit of 3, but it sends as many packets per second as it wants, without

Hi everybody, it is my first message here. I tried to browse throughout older posts but I found no immediate answer. I need to change rate of a tbf queue while ip packets are already enqueued by it. If I go: tc qdisc replace|change|link dev eth0 root tbf rate 180kbit burst 1540 limit 15400 as results all enqueued packets seems to disappear. I can see that from a: tc -s qdisc ls dev eth0

Probably this is an old question, but i''m not able to find nothing about... So, i''ve just started to play with tc to limit the transfer speed to my hdsl connection. I''m using the tbf and the command # tc qdisc add dev eth0 root tbf rate 10kbit latency 50ms burst 1000 Then i''ve tried to transfer a big (20 Mbyte) file onto my lan, using ftp and the client

Hi, I have a cable modem with a bandwidth capped upload rate. I''d like to prioritize packets going outbound according to the TOS header of the IP field. I''ve read through the LARTC Howto several times, and I think I have a good feel for the information it it. It also seems that what I''m trying to do is pretty straight-forward and common. Unfortunately, the HOWTO

Hello, After reading the excellent HOWTO I got traffic shaping working nicely over ethernet devices on a test setup. I can''t put this setup live though, because our main firewall has three 2mbit hdlc interfaces instead of a single device. We are using multipath routing using iproute2 nexthop at the moment, and that works fine for firewalling. But now I have a need for shaping and

Hello all, My company is sharing it''s internet access with a neighbor and the neighbor in question was eating our bandwidth (both in upload and download) most of the time. I finally set up a linux router to limit the incoming/outgoing bandwidth to his network by adding a tbf on eth0 interface and eth1 interface of the router (neighbor is behind eth1 and we are in-between him and the

Hello, I was attempting to throttle egress traffic to a specific rate using a tbf. As a starting point I used an example from the LARTC howto, which goes: tc qdisc add dev eth1 root tbf rate 220kbit latency 50ms burst 1540 I then attempt a large fetch from another machine via wget (~40 megs) and the rate was clamped down to about 12Kbytes/s. As this seemed too much, I gradually increased

This is my first attempt at understanding lartc: I want to throttle outgoing bandwidth fo a certain tcp port and leave other traffic the way it was. so I put a prio qdisc at the root of eth0 (dummy priomap since i want to use filters to switch bands): $ tc qdisc add dev eth0 root handle 1: prio bands 2 priomap 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 then attach a tbf qdisc at 1:2 : $ tc qdisc add dev

Hi i have found a problem related with tbf and the latency that the tbf calculates.. I have used the following parameters for burst and limit burst 100Kbit limit 500Kbit lat81.8ms burst 6Kbit limit 6Kbit lat 0us burst 200Kbit limit 100Kbit lat 4294.9s As u can see in the 3rd column the latency for 100Kbit burst and 500Kbit limit is 81.8ms but for 200Kbit and limit 100Kbit is 4294.9s!!! How

Hi have set the following tbf tc qdisc add dev eth0 root tbf rate 0.5mbit \ burst 5kb latency 70ms peakrate 1mbit \ minburst 1540 I want to add a filter so the ip traffic pass from it.. plz help me __________________________________ Yahoo! Mail Stay connected, organized, and protected. Take the tour: http://tour.mail.yahoo.com/mailtour.html

I presently use TBF with this syntax: tc qdisc add dev eth0 parent 1:100 tbf buffer=15000/8 LIMIT=30000 MTU=1500 parent class is a cbq with rate=128Kbit when I want to add PEAK, I get always RTNETLINK error: Invalid argument. Maybe be I don''t understand this parameter. What I know about it, it''s that it can control short-term burst traffic, and it''s what I need to do.