similar to: routing between 2 lines problem , after starting squid

I have 2 internet connections and i;m trying to use squid as transparent proxy but every time squid is using first internet line but i want to use second internet line . i have this settings and without squid it''s working i have default route on the first internet connection. iptables -t nat -I POSTROUTING -o eth2 -p tcp --dport 80 -s 192.168.0.0/24 -d ! 192.168.0.0/16 -j SNAT --to

Etx1 - First Internet Line - eth0 Ext2 - Second Internet line - eth2 LAN - Local Area Network - eth1 Other traffic - Ext1 -------+-------+--------------- Ext2 ---Web goes Here eth0 | |eth2 +-------+-------+ | ROUTER | +----+------+---+ |eth1 192.168.0.0/24 -----------------+ | 192.168.0.1/24------------------- - Gateway |

Hello to all people there . Can i guarantee ICMP respond time no metter how loaded is internet line . i have typical NATed enviroiment like External IP |linux router| LAN - 192.168.0.0/24 i have example setup with IMQ but is it possible to be done also if i attache htb to eth0 and eth1 for example . if i start shaper ping i better that without shaper but it''s not guarantted i mean

Hello, I wonder if someone could use the TPROXY with Shorewall and transparent Squid  with using the routing rules on shorewall (tcrules) for hosts / networks (LAN) with multiples providers (WANs) directly from the internal network on port 80 (with TPROXY transparent squid or REDIRECT). On this issue, the routing rules is not work propertly because the source is the

i''ve read your http://lartc.org/howto/lartc.rpdb.multiple-links.html article as well as Advanced IP Routing (esp. chapter 10.4) and still unable to make this thing work. am i that helpless? :) is there anyone to guide me through the multiple ISP setup? into details. i got 2 dsl connections from different ISPs (A and B), both connections use PPPoE, both got assigned with dynamic IPs

Hi I have been using Shorewall for a while now and find it very useful and easy to configure, I am learning iptables and having trouble getting the bridge to successfully work with squid, although I get it working with Shorewall straight away? Does anyone know the rules to successfully use squid with a transparent bridge? Internet – router - (bridge eth0 – eth1) – local lan auto lo iface lo

Hello! My system is: Internet ADSL(PPPoE) ---> ppp0 [LINUX server(router)] eth0 ---> LAN Server(router) is running on LINUX Slackware 8.1. I have recompiled a 2.4.22 kernel, enabled all QoS support in the kernel config, including HTB. My ADSL bandwidth is 256Kbit/s for download and 64Kbit/s for upload. I use the following HTB+IPTABLES configuration, because I want to reduce bandwith for

Hi all, This is my first post to this list. I hope someone can help me, I have been getting grey hairs trying to make this work! I have a bridge setup on a debian sarge box. The bridge is called br0 and sits between my cable modem and a non-name brand router/switch: [cable modem]----[eth1]---[br0]----[eth2]-----[no-name brand router] I have squid setup on the linux box and it works, I have

Greetings, I installed a squid 3.1.10.i686 squid to a centos 6.2i686. The proxy is working fine with the default config. After I decided to use it as a transparent proxy, I added two lines to config: http_proxy 10.0.5.1:3128 transparent, always_direct allow all http_port 10.0.5.1:3128 transparent # # Recommended minimum configuration: # acl manager proto cache_object #acl localhost src

Dear All, I''m using the kernel 2.6.6, iproute2-2.4.7.20020116, iptables v1.2.9, and gentoo. I have a leased-line 64 kbps. I can see the counter works in iptables, but in the htb, it doesn''t go to the right class (it always go to the default class). Any help will be appreciated here''s my htb conf #!/bin/bash tc qdisc del dev eth1 root tc qdisc add dev eth1 root

Hi, I'm currently facing a quite tricky problem. Here goes. I have setup Squid as a transparent HTTP+HTTPS proxy in my local network. All web traffic gets handed over to Squid by an iptables script on the server. Here's the relevant section in /etc/squid/squid.conf: --8<------------------------------------------------------------- # Ports du proxy http_port 3130 http_port 3128

Hi to all For is just az concept question : There are a need to change something in Squid3 config when it are running in the same box as shorewall with 2 ISP ? I''ve been thinking in do this at home, as a proof of concept for future implememtations ... I allways use Roberto''s Debian package to implement Shorewall . Fábio Rabelo

I''m attempting to setup Squid as shown on: http://shorewall.sourceforge.net/Shorewall_Squid_Usage.html#DMZ The firewall is a Bering 1.0 firewall running Shorewall 1.3.11, Red Hat 7.2 on the server in the DMZ. I''m not seeing the requests come in to the server using tcpdump. The server is 192.168.2.1 connecting to eth2 on the firewall, the local traffic I''m trying to

Hi, I am running squid as a TRANSEPARENT PROXY WITH SQUID 2.5 on CENTOS 4.5. Pls see below for squid.con file. http_port 3128 cache_mem 64 MB cache_dir ufs /var/spool/squid 100 16 256 cache_access_log /var/log/squid/access.log cache_log /var/log/squid/cache.log cache_store_log /var/log/squid/store.log # INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS # Example rule

Hi, I use for a customer a Linux router/firewall with 1 internal interface connected to the LAN and 3 external interfaces connected to 3 different ISP. I use a kernel 2.6.17 with a routes patch from Julian Anastasov. I mark outgoing FTP traffic for the routing. With the rules below I do not have a problem with the active/normal FTP to connect on FTP server. But the passive FTP does not pass

Am 11.03.2018 um 11:53 schrieb Nicolas Kovacs <info at microlinux.fr>: > > I've experimented some more, and I have a partial success. Here, I'm > redirecting all HTTPS traffic *except* the one that goes to my bank: > > iptables -A PREROUTING -t nat -i $IFACE_LAN -p tcp ! -d > www.credit-cooperatif.coop --dport 443 -j REDIRECT --to-port 3129 > > This works

I am looking for a good htb traffic shaping script to prioritize incoming traffic over outgoing traffic for my machine. I have a 100mbit line, ftp up, backup data comming in, but whenever mirrors starts grabbing it they use all the traffic and the backup data comming in (the important data) drops to like 300kb/sec. I was thinking some script doing sleep 60 [if downstream > 1mb/sec, limit

Hello! I''ve put some questions on this list some weeks ago and I''ve got good answers. Thank you! Now I''ve finished my (beautyful) script and I ran it on my router... About my script: It routes packages based on their destination on the Internet. I have about 1650 preffered destination networks listed in some file. The script read this file and marks every package for

hi list, i need help i have two links LINK 1 Internet Linux ---- LAN LINK 2 i need that the traffic web goes to link 2 i use squid in the linux with transparent proxy i´ve tried to use squid parameter "tcp_outgoing_address" but it doesnt work. best regards -- --------------------------------------------------- Fabio S. Silva

Hi. I have strange troubles with DNATing UDP packets. The situation: 1. We have local network 10.10.0.0/16 2. We have a "server network" 192.168.1.0/25 connected with local network by a router 10.10.100.1 (other ip 192.168.1.1). 3. Web server is located at 192.168.1.2 4. There are HW pingers in the net 10.10.0.0/16 whose do ping 10.10.100.1 every second. The ping is the UDP packet