similar to: Flush route table on laod balancing between 3 connections

This ''MSN'' is a web site? Im guessing it ''refresh''es every 5 minutes or so. They are proably testing cookies against the ip address they appear to be comming from. This is horribly wreckless of them if they arnt offering IPv6. Are they? They only way i have to remedy this problem is to get their IP range and bind it to the most stable connexion you have,

Greetings, I''m trying to set up some sort of load-balancing on a Linux (Trustix) gateway by using multipath routes, however I''m stuck with some problems. The idea is that this gateway (odd as it may seem) only has one external interface, which should route packets to two different gateways (Ciscos). The gateway''s external interface and the routers are all on the same

Dear all, First please excuse me for my very bad english. I''m curently setting up a gateway (linux 2.6.7) with load balancing ( multipath ). I access them from lan and my external interfaces are NATed. I''m used iproute2 as described in the LARTC and nano howto. My problem is that connections are well balanced but often, long connection are break because the default route

Hi, I have a huge collection of 6-channel .wav files containing audio and sensor recordings, which I need to analyse, across all 6 channels. I'm thinking about what will be easier to do. 1. Just split the channels in an external audio-editor and than read each mono channel seperatly with readWave (from tuneR), or 2. inherite the readWave class and extend it to multichannel reading? What

Hi, I have a box set up to distribute load over 4 satellite connections. I cannot use Instant Messenger programs with it as it stands, I believe that using iproute2, the path to the server is not being locked to one interface, so the IM servers are getting user traffic from multiple IPs. When I set just one default gateway, IMs work great. When I use the scope global/nexthop method of load

Hi! I''m doing load balancing for 5 dsl lines, each one with a dsl router attached to a linux machine ethernet plug. The problem is that I''m adding 15 more dsl lines, and I don''t have enough PCI slots in the linux machine to sum up 20 ethernet plugs (I already have 2 quad ethernet cards). So I''m considering connecting all dsl routers and the linux machine to a

Hello all I continue fighting with load balancing, I though it was easier :-/ Here is the script with my configuration #!/bin/sh IFI=eth0 IPI=192.168.10.155 NMI=24 IFE1=eth1 IPE1=192.168.1.128 NWE1=192.168.1.0 NME1=24 BRD1=192.168.1.255 GWE1=192.168.1.1 IFE2=eth2 IPE2=192.168.254.128 NWE2=192.168.254.0 NME2=24 BRD2=192.168.254.255 GWE2=192.168.254.254 ip link set $IFI up ip addr add

Hello, Currently I''m using the information from http://lartc.org/howto/lartc.rpdb.multiple-links.html and Julian''s patch to load balance two PPPoE Internet connections (DSL). It balances the traffic perfectly. +------------+ + ppp0 (eth0) ---+ Provider 1 + +-----+ | +------------- + LAN +--- eth2

Hi. I´m making an script for load balancing of two cablemodems internet connections toward my LAN. The problem is that when I try to ''equalize'' the the two internet connections with the weight=1 it doesn´t work. On the other hand, if I put 5 and 5 it works, but not at 100%, it does intermittlently, some times works and others don´t. example: ip route add default equalize\

Hello Everyone, Hope everyone is doing well. First off I would like to say that Lartc has been an invaluable source of information for me, I was looking for a solution and a bit of google''ing found this wonderful HOW-TO. So now down to the Question: I have three Internet connections, (Soon to be four if I can get this working) ETH0 - 2mb/2mb ETH1 - 7mb/1mb ETH2 - 7mb/1mb I wish

Hi guys, I have this configuration: LAN -- LINUX BRIDGE -- LINUX BRIDGE -- TS The linux's bridges are for wifi purposes (2 centos machines) and is working fine. The problem I have is that the TS are 3 windows TS in load balancing configuration. There is 1 IP for general purposes and every TS has its own IP. For example, the configuration is: 192.168.0.1/24 TS1 192.168.0.2/24 TS2

Hello, We have 3 DSL connections connected to eth3 and another interface with a dedicated link in eth0 (main table) We want to balance selected traffic (using fwmark and iptables) through our 3 DSL connections in a secondary table named DSL (without using the dedicated link in eth0), but the next command is not accepted, and gives us the following error: # ip route add default

Hi list, I have tried google but just cant get this to work or figure it out. My setup ======== vanilla 2.6.13 kernel with CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_MULTIPATH_CACHED=y CONFIG_IP_ROUTE_MULTIPATH_RR=y CONFIG_IP_ROUTE_MULTIPATH_RANDOM=y CONFIG_IP_ROUTE_MULTIPATH_WRANDOM=y CONFIG_IP_ROUTE_MULTIPATH_DRR=y My configuration: A host with two ppp links. Ontop of these two ppp dialup

-----Original Message----- From: Salim S I [mailto:salim.si@cipherium.com.tw] Sent: Thursday, May 10, 2007 5:22 PM To: ''Francis Brosnan Blazquez'' Subject: RE: [LARTC] Load balancing using connmark "I think the main advantage of shorewall solution is that it applies connmark to incoming packets from the wan as you point, leaving load balancing to outgoing connections to the

Hi everybody! I''m trying to implement the load balancing for a LAN with two ISPs. I''ve installed a Suse Linux Enterpise Server 9 with iproute2 for that porpouse. The server have two NICs, one of them is for both the LAN and ISP 1. I''ve setup both NICs with YAST (if I use ip for this, then the whole thing doesn''t work!) and execute the following commands to

Hello, I started off by reading the Linux Advanced Routing & Traffic Control Howto, then searched a bit around the web. I see many documents discussing these matters with kernel 2.2.x but they are quite old, something around 1998-2000. I have some questions but I might as well start by exposing my setup to clarify things. I have a couple of internet links: a leased line of 256kbit/s and an

Hi All, I want to achieve load balancing over two internet links where one link is both upload and download and the other link is download only (satellite). I am running a linux host as a router with one internet link of 256 kbps which supports about 50 LAN users. We are not running any servers and all the traffic originates from the LAN. My first link (say link A) gives me a bandwidth of 256

Hello all. I have load balancing (DSL + Cable) ala nano HOWTO + some modifications. Works great. LAN | ----------- | LOAD | |BALANCER | ----------- | | Firewall Firewall | | Cable DSL Modem Modem | | Internet Internet I would like to be able to define proxies for certain applications so that I can force them to use a particular

Hello! We're looking for a solution to reliably load balance our Asterisk boxes. So far we've been using a hodge-podge of directing different services to different boxes/IPs, but eventually I'd like to consolidate things so we can present a single IP address to the outside world. My question is - how do we go about doing that? I've read a lot of things like load-balancing via

Looking at parLapplyLB, one sees that it takes in X and then passes splitList(X, length(cl)) to clusterApplyLB, which then calls dynamicClusterApply. Thus while dynamicClusterApply does handle tasks in a load-balancing fashion, sending out individual tasks as previous tasks complete, parLapplyLB preempts that by splitting up the tasks in advance into as many groups of tasks as there are cluster