similar to: IBM X3200

Hi, I am trying to install centos 5.3 on ibm x3200 m2 server. The problem appears when the installer is about to finish the installation. It detects the RAID correctly, but it doesn't finish formatting the root partition. I tried the default partition layout and also a custom one, but it always ends with the same message: An error occurred trying to format /. this problem is serious and the

I tried to setup CentOS 4.7 on IBM X3200 M3 but i couldn't, isn't it compatible? if so what's the CentOS 4 release that's compatible with IBM X3200 M3? and should i install I386 or X86_64? Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL:

I think I have solved my issue and would like some input from anyone who has done this for pitfalls, errors, or if I am just wrong. Centos 5.x, software raid, 250gb drives. 2 drives in mirror, one spare. All same size. 2 devices in the mirror, one boot (about 100MB), one that fills the rest of disk and contains LVM partitions. I was thinking of taking out the spare and adding a 500gb drive. I

H all... I have an Astribank (8FXS/16FXO), IBM X3200 M2, Asterisk-1.6.2.1, dahdi-linux-complete-2.2.1, libpri-1.4.10.2, centos-5.4 final. My problem is, every time i unplug the astribank power supply, and reconnect it, astribank cannot work again (lsusb result is 11x0)... but, after reinstall the asterisk and dahdi, astribank will detected (lsusb result is 11x2)... any suggestion? Regard,

Hi all, As part of my raid experience, I have yet to have to do this, but was wondering how you guys would attempt it. I have 3 drives in a raid 1, with one as a hot spare. They are 250gb with all space used by two raid devices, 1 with boot, the other with LVMs filling them up. Now, lets say down the road I want to put in 500gb drives and replace them....yikes. I was thinking of taking out the

I was recently evaluating much the same question but with out only a single pool and sizing my disks equally. I only need about 500GB of usable space and so I was considering the value of 4x 250GB SATA Drives versus 5x 160GB SATA drives. I had intended to use an AMS 5 disk in 3 5.25" bay hot-swap backplane. http://www.american-media.com/product/backplane/sata300/sata300.html I priced

I'm considering how to design a new file server with a 3ware 9650se RAID controller. How much would you estimate the impact to be on sharing /home and the operating system on one raid 6 set? /home is mostly read only accesses with a ratio 10:1 read/write. I'm a little bit concerned that the log writes in /var/log could impact read performance on /home causing disk head movements or that a

Hey folks, Does anybody know if any of these are on the roadmap for ZFS, or have any idea how long it''s likely to be before we see them (we''re in no rush - late 2008 would be fine with us, but it would be nice to know they''re being worked on)? I''ve seen many people ask for the ability to expand a raid-z pool by adding devices. I''m wondering if it

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I''ve been unable to find anything definitive about what happens if I use RAID0 to join an SSD and HDD together with respect to performance (latency, throughput). The future is obvious (hot data tracking, using most appropriate device for the data, data migration). In my specific case I have a 250GB SSD and a 500GB HDD, and about 250GB of

Hi all, Can anyone please tell me, from experience, if it's possible to upgrade the hard drives in a RAID 10 system from 250GB HDD's to 500GB / 750GB HDD's, while the server is running? The server runs CentOS 5.5 x64. Our hardware vendors simply always say no, so we never actually tried doing this, and when a client needed an upgrade like this we had to build a new server with the

https://bugzilla.samba.org/show_bug.cgi?id=7683 Summary: New rsync deletes destination files it shouldn't Product: rsync Version: 3.0.7 Platform: x86 OS/Version: Linux Status: NEW Severity: critical Priority: P3 Component: core AssignedTo: wayned at samba.org ReportedBy:

On Fri, Jun 10, 2016 at 6:36 AM, Gor Nishanov <gornishanov at gmail.com> wrote: > >> If you're going down that route, that still leaves the question of the > >> semantics of the fork intrinsic... thinking about it a bit more, I think > >> you're going to run into problems with trying to keep around a return > block > >> through optimizations:

Gidday all - I've got a 1700VA dynamix UPS which is USB. The previous model (with a serial port) worked wonderfully with megatec, but this new one with USB is not working. It feels like the kernel is not handing the USB device properly. The web has not yeilded any useful info. What can I do from here? =========================================== [root at hera ups]# lsusb Bus 006 Device 002:

Hi, Does CentOS 5 / RH 5 ship with a similar windows active directory and able to support windows workstations? I've of heard OpenLDAP and FDS. Does windows support those? regards

Was hoping to get some updated instructions for this. Have access to a dedicated server. The info on the web seems to be outdated.....some of the links are DOA..... There was one simple install, but not sure if it would work: This tutorial explains how to install icecast kh10 server on centos 6 server # cd /usr/src # wget

Hi, I was first attracted to ZFS (and therefore OpenSolaris) because I thought that ZFS allowed the used of different sized disks in raidz pools without wasted disk space. Further research has confirmed that this isn''t possible--by default. I have seen a little bit of documentation around using ZFS with slices. I think this might be the answer, but I would like to be sure what the

On Fri, Jun 10, 2016 at 5:25 PM, Gor Nishanov <gornishanov at gmail.com> wrote: > Hi Eli: > > >> Naively, you would expect that it would be legal to hoist the store... > >> but that breaks your coroutine semantics because the global could be > mutated > >> between the first return and the resume. > > Hmmm... I don't see the problem. I think

Hello Can someone help. I have a real need to have ssh working with OS390 Unix System Services. IBM said that they would like it there as well, but they said the openssh organization has issues with this. Can you help me understand what the deal is or issues are??? Thanks, Bill O'Donnell

Greetings, I have three drives; they are all SATA Seagate Barracudas; two are 500GB; the third is a 2TB. I don't have a clear reason why they have failed (possibly due to a deep, off-brand, flakey mobo; but it's still inconclusive, but I would like to find a disaster recovery service that can hopefully recover the data. Much thanks for any and all suggestions, Max Pyziur pyz at

On Fri, Nov 24, 2017 at 06:53:31PM +0100, Micha? Miros?aw wrote: > Almost all drivers using remove_conflicting_framebuffers() wrap it with > the same code. Extract common part from PCI drivers into separate > remove_conflicting_pci_framebuffers(). > > Signed-off-by: Micha? Miros?aw <mirq-linux at rere.qmqm.pl> Since the only driver that seems to use this is the staging one,