similar to: htb child classes don''t borrow form "parent''s parent class" :(

Hi ; MY script: tc-htb3 qdisc del dev eth2 root ipchains -F tc-htb3 qdisc add dev eth2 root handle 10: htb default 20 r2q 40 tc-htb3 class add dev eth2 parent 10: classid 10:1 htb rate 50Mbit burst 2000 tc-htb3 class add dev eth2 parent 10:1 classid 10:100 htb rate 12mbit ceil 50mbit prio 1 tc-htb3 class add dev eth2 parent 10:1 classid 10:20 htb rate 38mbit ceil 50Mbit prio 8 ipchains

Hello all, I am with a doubt about QoS solution... I have a 4 Mbit backbone coming from the telco I use... This is the link I serve to my clients, so I make this classes: $TC qdisc add dev $DL root handle 1: htb default 60 CLASS="/sbin/tc class add dev $DL parent" $CLASS 1: classid 1:1 htb rate 4096Kbit $CLASS 1:1 classid 1:10 htb rate 256Kbit ceil 3072Kbit burst 15k $CLASS 1:1

Hi everybody! I am very glad to get htb test information from www.docum.org for the htb performance. Today, I setup a bridge using brctl. my setup as following: 192.168.2.26 | | | |------------- | HTB+BR box |-------- 192.168.2.18 | eth0 | | eth1 192.168.2.29 | | | I want to limit

Hello all, I have set my QoS solution and now I am facing a little problem... When I ping to my server it has some lost packages: Estatísticas do Ping para 172.30.0.1: Pacotes: SENDED = 1029, RETURNED = 880, LOST = 149 (14% de perda), Aproximar um número redondo de vezes em milissegundos: Mínimo = 0ms, Máximo = 686ms, Média = 105ms If I disable my QoS ping stats to be ok. I even have

Hi, I am new to tc and have been reading quite a bit on how to set it up etc. Everything seems to be working fine, until I started scp-ing a large file over a low bandwidth connection as part of my testing process. Here is the setup: my pc --- bridge running tc/htb --- rest of network TC is filtering traffic from "my pc" and classifies it as 120kbit (see my script below). I then scp a

hello. i have following setup: a machine (winChip 200mhz cpu, 32mb ram, linux 2.4.28) acting like a bridge with 2 interfaces (eth0 - to our ISP, eth1 - to our network) machine does not have any IP there is a 802.1q vlan eth0.2 eth0.2 and eth1 are bridged in br0 i have one 4mbit link which i share with my friend, i have 3mbit and he has 1mbit all our IP addresses are public and we have the

Hello I am using htb (krenel 2.6.14.3 + esfq patch from fatooh.org) to limit the bandwidth. But I want the absolute maximum rate to be for example 5Mbit and not to exceed it. here is the script: $tc qdisc add dev ${NETIF} root handle 1 htb r2q 4 $tc class add dev ${NETIF} parent 1: classid 1:21 htb rate 5Mbit ceil 5Mbit $tc class add dev ${NETIF} parent 1:21 classid 1:101 htb rate 2Mbit ceil

Hi, I''m trying to perform some (what I consider) basic traffic shaping on our network utilising HTB. I have mostly reused the example on the lartc.org site: tc qdisc add dev eth0 root handle 1: htb default 10 tc class add dev eth0 parent 1: classid 1:1 htb rate 100mbit burst 24k tc class add dev eth0 parent 1:1 classid 1:10 htb rate 50mbit ceil 80mbit burst 19k tc class add dev eth0

Hello i''m having some issues trying to match packets using iptables mark, iproute filter and tc filter.- i mean, when i do iptables -t mangle -A INPUT -p tcp --dport 80 -j MARK --set-mark 20 iptables -t mangle -A PREROUTING -p tcp --dport 25 -j MARK --set-mark 10 iptables -t mangle -A FORWARD -p tcp -i eth0 -o eth1 --dport 25 -j MARK --set-mark 10 $TC qdisc del dev $INET_IFACE root $TC

Hello, after spending several hours reading archives, I decided to write new post. I successfully set up packet classification, made some basic HTB setup, made some simple graphical representation from HTB statistics data... BUT, I cannot figure out how to refine HTB to get this behaviour: I need that class "p2p" should be the last one to get some link capacity. If I set both RATE

Hey, I have such a script: tc qdisc add dev $DEV root handle 1:0 htb default 21 r2q 2 tc class add dev $DEV parent 1:0 classid 1:11 htb rate 100mbit tc class add dev $DEV parent 1:11 classid 1:21 htb rate 512kbit ceil 512kbit tc class add dev $DEV parent 1:11 classid 1:23 htb rate 1024kbit ceil 1024kbit tc class add dev $DEV parent 1:11 classid 1:25 htb rate 3072kbit

Hi! Is it HTB fully compatible with BOND interface? I have this setup (mode= fault tolerance) : BOND0 -> ETH0 + ETH1 BOND1 -> ETH2 + ETH3 ( http://www.kernel.org/pub/linux/kernel/people/marcelo/linux-2.4/Documentation/networking/bonding.txt ) HTB work very well with Class over BOND0. If I add Class for BOND1 it generate balance errors. Also with HTB.init

Hi! I have just started with traffic shaping, and after hours of reading websites, man pages asf. I am still stumped at one problem I have. The interface eth0 is attached to the outside world, and I have an openvpn tunnel to another part of the organization using eth0 and port 5001. The idea was that all traffic going through the tunnel would have top priority and the rest share

hello folks, this is my first post to that list. so I hope I am not completely OT here :-) reading the (excellent!) lartc and then writing my own qos-script I have still some open questions which I will try to formulate now: - "Now we can optionally attach queuing disciplines to the leaf classes. If none is specified the default is pfifo." - I can''t find info about Pfifo.

Hello. I''m newbie with QoS. I read some articles and I have a question on You. If you have time to spare, it would be great if you reply. Here is my problem. I''m on wireless network(no earnig comunity). We got 2/2Mbit(soon 4/4) for 100 people(sharing link). Not long ago people start screaming that their games don''t work good(lagging). So I add to our qos class games

Hello! I need to switch from htb2 to htb3, because of speed issues (for me, htb2 is unable to handle more then 100mbit duplex with ~550 classes), kernel profiling shows htb_dequeue_prio at 1st place with 3x isolation. So, I''ve moved from 2.4.19 to 2.4.25 kernel (hi-pac for classification/marking and htb3 for queueing), and traffic rate drop from 100 to 20mbit. What can be wrong? The

Hi, Can anyone point me out where the script below is wrong? All I want is that host 172.31.1.1 can only use 10 megabit. If I run this script on the in-between router nothing happens (the host uses still the full 100 mbit, tested with iperf) , so i assume that something must be wrong.... #!/bin/sh # LAN1 NIC tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1: htb tc class add dev

i''m trying to limit upload and download but something is wrong(it is about NAT) i will post here my "script" maybe someone could tell me what is wrong my kernel(2.6.9) is patch with imq(linuximq.net) and my iptables(1.2.11) also #flush tc qdisc del dev eth0 root tc qdisc del dev eth1 root tc qdisc del dev imq0 root tc qdisc del dev imq1 root ifconfig imq0 down

Hi to all I am studying HTB on LARTC how to. I realize a simple configuration on router: tc qdisc add dev eth0 root handle 1: htb default 30 tc class add dev eth0 parent 1: classid 1:1 htb rate 3mbit burst 15k tc class add dev eth0 parent 1:1 classid 1:10 htb rate 2mbit burst 15k tc class add dev eth0 parent 1:1 classid 1:20 htb rate 1mbit burst 15k tc qdisc add dev eth0 parent 1:10 handle 10: sfq

Hello all, I am trying to make a filter into my QoS rules and I founded that when I try to use filters u32 and with fwmark they do not work together. This is the filter I use, just and example, for u32: $TC filter add dev $DL parent 1:0 protocol ip prio 1 u32 match ip sport 22 0xffff flowid 1:10 This is working fine. Now if I try to mark a package that I want it to go to the same