similar to: Understanding of HTB classes

Hi, I have implemented QOS classifiers using TC with HTB. The classification is working. I would like to know whether there is some tool which will help me in monitoring the bandwidth share of the various classes. Thanks, Vinod C

Hi, I have a linux box which balances load between two interfaces ( say WAN1 and WAN2). I have masquerading on for any request coming from LAN to the outside world. The setup is in such a way that WAN1 drops packets with source ip belonging to WAN2''s network and viceversa. For some strange reason, I find that packet coming out from the WAN interface has source address of WAN2 and

Hi all, I am using htb for traffic classification. Is there a limit to the value prio can take cos when I give the following command . tc class add dev eth2 classid 1:22 parent 1:2 htb rate 500Kbit ceil 1000Kbit prio 8 and then check the output, I find that the prio of 1:22 is 7, same case for other values above 7. Thanks, Vinod C

Hello, First of all, I already contacted Martin Devera, the developer of HTB, and he told me to search for help on this mailinglist, thus I am describing my problems here now... I am kind of seriously annoyed by QoS as I have been trying for over 3 years to get it working properly - first I did not understand how it works, then it seemed not to work, then it was working perfectly for half a

Thanks, The only issue here is that for each service I need to create 200 child classes if I have 200 clients... Let me explain the problem better I have the following connection from my ISP: (1024/1024) (rate/ceil) 1) First, I want to divide the 1024 into smaller pieces based on priority: 256/256 - P2P (I want to limit the P2P traffic as much as possible) 256/1024 - HTTP 256/1024 - FTP

Hi, this is a followup to "Problem with HTB and ceil", the problem with the ceiling has been resolved, thanks to the memebers on this m/g. Now I have the problem that packets get into the correct classe with the correct marks but the prios are not respected. I have 4 different classes: 1. voip class / prio 0 / mark 100 / voip traffic 2. ACK class / prio 1 / mark 200 / ACK packets to

Hello mailing list, i stand bevor a mystery and cannot explain it J. I want to do shaping and prioritization and I have done these following configurations and simulations. I can´t explain, that the combination of PRIO and TBF is much better than the HTB (with the prio parameter) alone or in combination with the SFQ. Here are my example configurations: 2 Traffic Classes http (80 = 0x50) and

I am planning a setup with thousands of classes in a HTB qdisc, say from 1:1000 to 1:2000, each with a very small rate and a big ceil, for fair sharing of a 45mbit link. I suspect some problems could be lurking in there. Anyone having good/bad experience with such number of classes? Simon _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl

-------------- next part -------------- An embedded message was scrubbed... From: Vinod Chandran <vinod_chandran@multitech.co.in> Subject: Re: [LARTC] sercice-based and ip-based shaping Date: Tue, 02 Aug 2005 10:36:00 +0530 Size: 3441 Url: http://mailman.ds9a.nl/pipermail/lartc/attachments/20050802/44a5f54e/LARTCsercice-basedandip-basedshaping.eml

Hi John, Am currently running dos mode not graphical mode. Could you have any other method. Hi Ashish, You are correct. qmailtoaster backup file which was around 184 GB in backup.gz type and i have removed .bz2 type file with the same backup/mailbkup directory. After removed .bz2 file it's gone backup.gz also which was 184 GB file. I have run this command locate .gz but couldn't find out

Hi All, I have running Centos 6.5 32 bit machine. This machine is running qmailtoaster packages and mailbox size is 385 GB. if i run the df -h command it show 385 GB out of 1TB I have run the same command today suddenly shows 576 GB out of 1 TB. I didn't update any bulk file and mail transaction is not very high. How do i check this issue and fix it. how do i find out and why suddenly

Dear Friends, I have faced below issues since two weeks to till now. Could anyone help me to rectify this issue. Below message retrieve from logs and getting disconnection from Outlook and other email clients. Error Message Jul 20 10:33:35 master: Warning: service(imap-login): process_limit (100) reached, client connections are being dropped My local.conf from dovecot folder protocol imap {

Hello I am using htb (krenel 2.6.14.3 + esfq patch from fatooh.org) to limit the bandwidth. But I want the absolute maximum rate to be for example 5Mbit and not to exceed it. here is the script: $tc qdisc add dev ${NETIF} root handle 1 htb r2q 4 $tc class add dev ${NETIF} parent 1: classid 1:21 htb rate 5Mbit ceil 5Mbit $tc class add dev ${NETIF} parent 1:21 classid 1:101 htb rate 2Mbit ceil

Hi Friends, I have noticed below log in dovecot.log on my machine Centos 6.7 32 bit. Warning: Inotify instance limit for user 89 (UID vpopmail) exceeded, disabling. Increase /proc/sys/fs/inotify/max_user_instances I have increased manually but after reboot goto the same existing default value. How do i fix this issue permanently. Advance thanks for your help. -- *Thanks,* *Manikandan.C*

I have the following code and I am not able to get it working. The error message is not coming on the top, it is just getting displayed on a different page if I dont have the rescue block commented at the bottom. Model: user.rb require "digest/sha1" class User < ActiveRecord::Base validates_presence_of :eaddress, :fname, :passwd, :pcode, :country, :day, :year, :month, :gender,

Hi Team, i have been facing issues with sangoma card with 16 E1. used LibSS7 asterisk 1.6 with 8 E1 the links are stable , but moment i add another card of 8 E1 for to support 16 E1. link keeps fluctuating any idea why ? Please help Thanks Vinod Dharashive -------------- next part -------------- An HTML attachment was scrubbed... URL:

Is there any easy way to encrypt the URL params that is seen in the URL. I dont feel comfortable exposing the id of the models to the external user. -- Posted via http://www.ruby-forum.com/. --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Ruby on Rails: Talk" group. To post to this group, send email to

Hi, I have implemented some RJS code and I have the same exact code in 2 different places. In one place I get the error "Element.update is not a function" and the other place works fine. Any idea why this error is coming? Breaking my head. -Vinod --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Ruby on

Hi, I''m trying to setup QoS in my TSL box. Following to mailing list reccomendations I changed PSCHED_CPU but can''t get accurate shaping with HTB. I have disabled HYSTERESIS also (by setting it to 0). I have Intel Celeron 1.8Mhz (TSC supported I think). ******** My script ****** tc qdisc add dev eth0 root handle 1: htb default 22 r2q 10 # Class corresponding interface

Hi All, I want to make own ip pbx server for our office with need to call local extension through soft dialer. How to make this system without any pstn provider. -- *Thanks,* *Manikandan.C* *System Administrator*