similar to: FW: HFSC + ESFQ - class statistics

Hi! Do you know somthing about hfsc and bps? There''s no output for speed only for packets. Doesn''t hfsc support such a field? tc -s class show dev eth0 class hfsc 1: root Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) rate 0bit 0pps backlog 0b 0p requeues 0 period 0 level 2 class hfsc 1:11 parent 1:1 sc m1 0bit d 18.0ms m2 1000Kbit ul m1 0bit d 0us m2

Hi, Is it possible to attach another qdisq under a HFSC classfull ? I try it and the configuraton works : $TC qdisc add dev $dev root handle 1: hfsc default 30 $TC class add dev $dev parent 1: classid 1:1 hfsc sc rate ${RATE}mbit ul rate ${RATE}mbit $TC class add dev $dev parent 1:1 classid 1:10 hfsc rt umax 1500b dmax 30ms rate 200kbit $TC class add dev $dev

I stumbled upon a problem while upgrading Ubuntu 13.04, Shorewall version from 4.4.26.1 to 4.5.16.1. Everything was working fine before, after upgrading the script wouldn''t start. First some config files. tcdevices: #INTERFACE IN-BANDWIDTH OUT-BANDWIDTH OPTIONS REDIRECTED eth1 - 6300kbit hfsc,classify ifb0 - 6300kbit hfsc

My problem with HFSC tc command is ... tc command''s HFSC have a lot parameter with 4 curve type SC curve -> umax dmax rate LS curve -> umax dmax rate RT curve -> umax dmax rate UL curve -> umax dmax rate so i''dont know which parameter are appropriate for my test case such real time class which curve are appropriate and good working result. my assumption about

Hello, I setup iproute2 and iptables on my box, is a P4 2000 Ghz / 1GB memory. I have setup squid and iptables to be a transparent proxy, with cache. I''ve read on lartc.org almost everything and i want to ask if there is a u32 match for the connection time or something like that, or an u32 match for the packet number in a connection. All i want to do is shape the web traffic for long

hi, I would like to use the HFSC scheduler for my QoS. I''ve 4 class and 2 of them need to control the bandwidth and the latencies so I think I must use HFSC. So I read some doc ( http://del.icio.us/tag/hfsc ) but its not very clear. I make some tests with differents parameters but I''m not able to use correctly this scheduler: $TC qdisc add dev $dev root handle 1: hfsc default 40

Hello, I’ve read this Article avout VOIP and HFSC http://automatthias.wordpress.com/2006/06/30/hfsc-and-voip/ I’ve got few questions ? Considering this tc class add dev $DEV parent 1:1 classid 1:2 hfsc \ rt m1 ${UPLINK}kbit d 50ms m2 $[1*$UPLINK/10]kbit \ ls m1 ${UPLINK}kbit d 50ms m2 $[3*$UPLINK/10]kbit \ ul rate ${UPLINK}kbit rt = realtime curve ls = linksharing curve but m1 = ? m2 = ? d =

I have a lot question about tc-command because now i''m doing research to compare performance between HTB and HFSC so i''m doubt a lot thing and your reply are so very helpful me ... my question is 1. I''m use opensource (Mastershaper) for help to config traffic control but when i''m try to config HTB, I''m doubt about in each chain must identify

I have a lot question about tc-command because now i''m doing research to compare performance between HTB and HFSC so i''m doubt a lot thing and your reply are so very helpful me ... my question is 1. I''m use opensource (Mastershaper) for help to config traffic control but when i''m try to config HTB, I''m doubt about in each chain must identify fallback

I have a lot question about tc-command because now i''m doing research to compare performance between HTB and  HFSC so i''m doubt a lot thing and your reply are so very helpful to me ... My question is In HTB tc command question 1. I''m use opensource (Mastershaper) for help to config traffic control but when i''m try to config HTB, I''m doubt about

Hello, I''m having such problem with HFSC with following config: + tc qdisc del dev eth3 root + tc qdisc add dev eth3 root handle 1: hfsc default 2 + tc class add dev eth3 parent 1: classid 1:1 hfsc ls rate 512kbit ul rate 512kbit + tc class add dev eth3 parent 1:1 classid 1:2 hfsc ls rate 2kbit ul rate 400kbit + tc class add dev eth3 parent 1:1 classid 1:3 hfsc ls rate 32kbit ul rate

Hello, I just found the great howto and started shaping my internet connection. The howto''s last update is a liitle in the past now so I have some questions about how things are done the best way nowadays ;-) To ensure a stable and low latency voip communication I added an HFSC qdisc to device ppp0 (1 Mbit SDSL). There are two classes (by now): One for SIP and RTP and one for the

Hello, I''m using Linux kernel 2.6.x and tc (from iproute2 package). I''m trying to use HTB or HFSC scheduler in order to limite the rate of outgoing packets and also in order to minimiez delay for RTP stream. But I didn''t suceed in having this 2 QoS services working. I use Iptables in order to classify packets. Here is my HFSC conf. In fact the pings that i send from

Hello, I''ve been trying to shape the bittorrent traffic (on my external interface, upload), but without luck, for this I''m using layer7 filter right now, but I''ve also tried ipp2p, with the same results, I might say that this is not a problem with this packet classifiers, the problem is with HTB, here''s why. When I open azureus (the bittorrent client I

I don''t understand the following: root@jmnrouter:~# tc -s class ls dev vlan1 && tc -s qdisc ls dev vlan1 class hfsc 1: root Sent 0 bytes 0 pkts (dropped 0, overlimits 0) period 0 level 2 class hfsc 1:1 parent 1: sc m1 0bit d 0us m2 220000bit ul m1 0bit d 0us m2 220000bit Sent 0 bytes 0 pkts (dropped 0, overlimits 0) period 31304 work 7533852 bytes level 1 class hfsc 1:10

Hi, I''m trying to get a handle on hfsc. Here is my configuration: root@jmnrouter:/jmn# tc class show dev vlan1 class hfsc 1: root class hfsc 1:1 parent 1: ls m1 0bit d 0us m2 225000bit ul m1 0bit d 0us m2 225000bit class hfsc 1:10 parent 1:1 rt m1 191000bit d 25.0ms m2 135000bit ls m1 0bit d 0us m2 135000bit ul m1 0bit d 0us m2 225000bit class hfsc 1:20 parent 1:1 rt m1 22008bit d

after i use "tc -s -d class ls dev eth0" will show statistic data about HFSC ,like this root@ubuntu:/home/shaper# tc -s -d class ls dev eth2 class hfsc 1: root Sent 0 bytes 0 pkts (dropped 0, overlimits 0) period 24 work 13844792199226589188 bytes rtwork 20937281664 bytes level 3461036864 class hfsc 1:11 parent 1:1 sc m1 30720Kbit d 10.0ms m2 30000bit ul m1 0bit d 0us m2

When I start my script: * - Creating classes on br1 for upload control ... * - tc class add dev br1 parent 2:0 classid 2:46 hfsc ls m1 576.0Kbit d 2000ms m2 192.0Kbit ul m2 384Kbit ... [ ok ] * - tc class add dev br1 parent 2:46 classid 2:47 hfsc sc umax 1500b dmax 30ms rate 80Kbit . [ ok ] * - tc class add dev br1 parent 2:46 classid 2:48 hfsc ls m2 152.0Kbit ul m2 152.0Kbit

Dear Admins and Hackers, maybe i am to stupid to use ''tc''. But i having logical Problems to understand the Filter Rules in tc. Common Config: There is a Linux Engine (Debian) with a 2.6.11.11 Kernel which act as Packetshaper. Two Interfaces eth0 and eth1 are installed. Interface ''eth0'' is the Firewall Side Net 195.185.185.0/24. Interface

Hi all, Long email but please be patient :) I am part of EHAS [1], a non profit organization which main goal is to improve the Healthcare assistance in isolated rural areas in developing countries. Recently we have developed a long distance Wi-Fi network in Cuzco (Peru). This network provides connectivity to 12 nodes (they are in fact Health Centers). As VoIP is a essential service in this