similar to: htb: HowTo identify squid cache hits

Hi I''m newbie on this and i would appreciate some pointers on how to limit the http trafic to my users from my linux-gateway box. Thanx in advance -- Guillermo Gomez <ggomez@neotechgw.net> neotech _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Hai, The folder test-suite/buildtests/ Is an not exiting folder in current 4.11 tar.gz Can you verify that? I thinks thats also from 5.x Greetz, Louis > -----Oorspronkelijk bericht----- > Van: squid-users > [mailto:squid-users-bounces at lists.squid-cache.org] Namens > Amos Jeffries > Verzonden: donderdag 23 april 2020 14:28 > Aan: squid-users at

Hello there, I can modify /etc/shorewall/tcdevices to control overall IN-BANDWITH. It is quite effective. Just change 2mbit to 128kbit. However, how do I limit download speed for a certain host IP on the LAN? I want to limit host 192.168.1.140 download speed to 128Kbit. Other hosts on the 192.168.1.0 LAN can still surf at 2mbit. Any input welcome. Kind Regards, Michael

Hi folks, So, I have a pretty simple setup - a linux router machine running as a firewall/router for a small neighborhood LAN (approx 20 machines). I also have squid running on the box in non-transparent mode, and also I have set up NAT for TCP/UDP ports above 1024 for all clients and SSH/POP/SMTP/CVS NAT''d for selected ones based on MAC filtering. No hosts whatsoever can access ports 80

Hi I have Linux box (Debian) that acting as a bridge. Eth0 and Eth1 are bridged (br0). Br0 have public IP. Eth0 connects to the internet. Eth1 connect to servers in DMZ (with public IPs). Eth2 connects my Lan (192.168.1.0/24). My connections is 2Mbit/2Mbit. I''m doing SNAT for my Lan. QoS on eth0 works fine for DMZ, but is there a possibility to doing QoS on

Folks, I am a little bit confuse in how to put these packets into correct mangle table for traffic shaping. This is what i ve planned to do: - - - - :eth0 [ LINUX-BOX ] eth1: - - - - Let say: eth0: 220.100.1.1 eth1: 192.168.1.1 eth1:1 192.168.1.2 192.168.1.0/24 get natted into 220.100.1.1 before reaching the internet. I put every packets coming from internet (eth0) this way: # iptables -t

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I mean http://users.gurulink.com/drk/transproxy/TransparentProxy.html on "6. Transparent Proxy to a Remote Box." Thanks - -------- Original Message -------- Subject: Squid on remote Box Date: Wed, 16 Mar 2005 17:16:35 +0700 From: Royke K <royke4k@cbn.net.id> To: shorewall-users@lists.shorewall.net How do I configure port

Hi! I want to redirect all http and https traffic from my LAN to squid in DMZ - transparent proxy. How do I do that? Regards, Sasa

i have squid running on DMZ zone and my network using ProxyARP on eth1 and eth2 mylinuxbox slackware 9.2 my network can access to internet normal, but can''t redirect to squid server from firewall. sometimes my network can connect to squid and sometimes bypass this squid server. i dont know what going on. now.. my network bypass redirect to squid server. my config file follow document

Hi, I have a box running with iptables and iproute2. it has 3 ethernet cards. One for the internet. another for LAN and yet another for DMZ. @ DMZ ZONE I have 3 web servers. But I have only one real ip on my firewall. Now , I want to forward port 80 to theese 3 web servers. How can I do it? I searched a lot from google. But, still no luck. -- Thank you Indunil Jayasooriya

Hi there, I''ve got the following problem on my hand..... I''m a sysop for a school in the netherlands. We have a network with 5 different schools (and 1 administration). Each of those have their own ip range in the private network (10.4.0.0 10.5.0.0 and so on). For all these schools we have an internet uplink of 2mbit. And this bandwidth should be shared as fairly as possible.

After starting to shape local traffic now i am getting a lot of kernel panics in tcp_retransmit, so i decided to update my kernel from 2.6.17.14 to 2.6.21.1 , the problem is that after that i get: # iptables -t mangle -A POSTROUTING -o eth0 -j IMQ --todev 0 iptables: No chain/target/match by that name so i can not redirect ttraffic to IMQ device. and modules are loaded. - # lsmod Module

Hi, I want forward port 21 and 443 to my squid. A simply rule (dnat) didnt help me. My http - port (only 80) will forwarded to my squid. It runs fine. Here I have used the HowTo from Tom and the hints from http://lartc.org/. I want to do the same with port 21 as port 80. My network: Shorewall: eth0 net (192.168.108.1) eth1 dmz (192.168.109.1) eth2 loc (192.168.110.1) eth3 loc1

Dear All, Linux Kernel 2.4.20-8 Running Shorewall 2.2.0 ip addr show 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 brd 127.255.255.255 scope host lo 2: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 100 link/ether 00:48:54:53:82:45 brd ff:ff:ff:ff:ff:ff inet 62.68.254.178/28 brd

Hello everyone... I have a little trouble and need some help :P How can I check on which interface the packet is going (eth0, eth1; I have two ISP and on eth3 little LAN), using to check it TC and IMQ? (HTB script) I tried to mark packets, but on chain POSTROUTING this does not work... Maybe because packets fall on IMQ before signing. I tried marking it on FORWARD but packets also

Hello, I''m not sure if this has been asked before but I would like to ask assistance for this problem I have. I installed gentoo for my firewall/gateway and installed dhcp and shorewall. Currently, I can ssh, ftp, remote desktop connect, ping, etc (anything I can think of) from an internal computer inside my network to an external IP, except I cannot surf the net. I can ssh/ftp to

Hi, In a routed network setup , is it possible to use ProxyARP given the condition that the shorewall external interface and the DMZ interface are in a completely different network . That means the gateway of the External interface and the hosts in ProxyARPed DMZ zones are in different network. eth0 ---in 220.227.X.Y/30 -- shorewall external interface eth1 ---in 220.227.A.B/27 -- shorewall

While I''m in temporary retirement, I''ve decided spend a little time experimenting with new things and making some updates to the web site. The biggest result of this effort to date has been: http://shorewall.sf.net/Shorewall_Squid_Usage.html This outlines how to use Squid as a transparent proxy running on the firewall, in the DMZ or in the local network. In the latter two