similar to: four tc filter and netem questions

Hi, I am using netem to add loss and then adding another qdisc within netem according to the wiki. Then i want to change the netem drop probability without having to delete the qdisc and recreate it. I try it but I get invalid argument: thorium-ini hedpe # tc qdisc add dev ath0 root handle 1:0 netem drop 1% thorium-ini hedpe # tc qdisc add dev ath0 parent 1:1 handle 10: xcp capacity 54Mbit

I''m trying to use tc and netem to delay packets from several different machines as they exit via eth0. Assume two source IPs, 10.0.0.122 and 10.0.0.133. I''d like to delay packets from the first one by 200ms, and packets from the second one by 300 ms. Any other traffic should be sent out normally. Here''s what I tried: # make three classes, 1:1, 1:2, and 1:3: tc qdisc add

hi i tried the example given on the examples page to duplicate selected traffic like tc qdisc add dev eth0 root handle 1: prio tc qdisc add dev eth0 parent 1:3 handle 3: netem duplicate 40% tc filter add dev eth0 protocol ip parent 1:0 prio 3 u32 match ip dst 11.0.2.2 flowid 1:3 when i ping from 11.0.2.2 to this interface my machine hangs. the same thing works for drop or delay. i would

I''m trying to setup a netem delay with no luck (using iproute2-2.6.8, compilation broke during arpd compile, so I use the tc binary in the tc/ subdir, there''s also a q_netem.so there). kernel is 2.6.8.1, compile with CPU cycle counter as time reference. I was using sch_delay of 2.6.7 happily with something like: tc qdisc add dev eth0 root 1: delay latency 1ms rate 35M now I use:

I shape my upstream cable link with HTB from a script. My voip traffic (from the 192.168.0.14 host) gets priority over everything else to the near-starvation of other classes; the rest of the traffic is split up based on some priority rules (qos, empty ack packets, etc). eth1 is the uplink I''ve been using HTB and fw marking for the job until recently, when I changed the queue structure

Hi all, I''m running some tests with netem and I noticed some strange behaviour that looks like a bug: I''m pinging another machine and adding delay with netem. When I tell netem to give me a 10ms delay, it works fine. The problem is that when I ask for a 11ms delay, it gives me 20ms! It happens for any value between 11ms an 20ms, and it repeats for values over 20ms, now

The interface is setup like this: # tc qdisc del dev eth0 root # tc qdisc add dev eth0 root handle 1: htb default 2 # tc class add dev eth0 parent 1: classid 1:2 htb rate 20mbit ceil 20mbit If I add a second class and a filter to send traffic to it like this: # tc class add dev eth0 parent 1: classid 1:130 htb rate 1Mbit ceil 1Mbit # tc filter add dev eth0 protocol ip parent 1:0 prio 130 u32

Hi, I am currently working on the TC. I have seen some behaviour which seems to be odd. I know someone in the mailing list would have seen this problem or may have some fix for this problem. When I try to include u32 filters with different priority or pref, I could see the filters being set on all the priority''s irrespective of the priority number. See my sample script below and the

Hi Guys, I have a couple of problems that are driving me nuts. This is the script I am using to setup restirctions and bw limitations: #Adding root class. tc qdisc add dev eth0 root handle 1: htb default 10 &>/dev/null tc class add dev eth0 parent 1: classid 1:1 htb rate 100Mbit ceil 100Mbit burst 2k quantum 1536 tc qdisc add dev eth1 root handle 1: htb default 10 &>/dev/null tc

I''ve done some tests with TC FILTER and his PRIO and think that is an error or OMISION on TC FILTER DOCUMENTATION from: http://lartc.org/howto/lartc.qdisc.filters.html#AEN1100 Let''s say we have a PRIO qdisc called ''10:'' which contains three classes, and we want to assign all traffic from and to port 22 to the highest priority band, the filters would be:

Dear Admins and Hackers, maybe i am to stupid to use ''tc''. But i having logical Problems to understand the Filter Rules in tc. Common Config: There is a Linux Engine (Debian) with a 2.6.11.11 Kernel which act as Packetshaper. Two Interfaces eth0 and eth1 are installed. Interface ''eth0'' is the Firewall Side Net 195.185.185.0/24. Interface

Hi all! :) I see that this is partially covered in the mailing list archive but at the moment I can''t find a straight & working answer. I have an imq device with dynamically attacched classes/qdiscs/filters. There is a hashing filter that maps the last octet of an user''s IP address to a class (and associated qdisc). The "empty" filter looks like this: filter

I''m attempting to set up a hierarchy of tc qdiscs with filters, but the filters don''t seem to be working correctly.  I''m running iptables 1.3.5 with iproute 2.6.16.20060323 on a Gentoo 2.6.18 kernel.  The system takes all my tc setup, but does not filter packets as I am expecting it to based on my ruleset. My tc qdiscs and classes are added correctly and report as

Hi fellows, i''m just a newbie to use the cool tc and played around the last 2 weeks. I''m quite confident - in theory - what''s possible and the basic difference between the queuing disciplines. We''re using a Fedora Core 3 box as Gateway (iptables,tc,iproute2 with NAT). Clients are coming in via eth1 and outgouing traffic (2Mbit/s SDSL) through eth0. So we

Hi everyone, My HTB script is showing me those "r2q change" warnings. I read that I should test with r2q values to gain accuracy and stop the warnings but I made some tests with r2q and with burst and I still get the warnings. Any ideas on this issue will be very helpful. The script seems to be working as the bandwidth for the IPs is being shaped. The NIC works at 100mbit and the

Dear All I am trying a very simple set up: (a bit long message follows) #Flush previous definitions $TC qdisc del dev $VVNET root >&/dev/null $TC qdisc del dev $INTERNET root >&/dev/null $IPT -t mangle -D PREROUTING -i $INTERNET -d 200.231.56.0/24 -j IMQ --todev 0 # Mothers off all disciplines $TC qdisc add dev $VVNET root handle 1: htb default FFFF r2q 1 $TC qdisc add dev

it is posible to do more than 2048 filter rules and classes like this: /sbin/tc class add dev eth1 parent 1:15 classid 1:101 htb rate 1kbit ceil 6128kbit prio 1 quantum 1500 /sbin/tc filter add dev eth1 protocol ip pref 0 parent 1: u32 match ip dst 10.10.24.17 flowid 1:101 /sbin/tc qdisc add dev eth1 parent 1:101 handle 101: sfq /sbin/tc class add dev eth1

Hi, I am using iproute2 to setup fowarding, adding routes like "ip route add 192.168.1.3 via 192.168.1.2" I was wondering where in the kernel I can insert probabilistic packet loss only for forwarded packets? So that for instance I can drop 5% of all forwarded packets? I don''t need help with the actual code, just need help finding where to insert this code :) Thanks! George

hello. i have following setup: a machine (winChip 200mhz cpu, 32mb ram, linux 2.4.28) acting like a bridge with 2 interfaces (eth0 - to our ISP, eth1 - to our network) machine does not have any IP there is a 802.1q vlan eth0.2 eth0.2 and eth1 are bridged in br0 i have one 4mbit link which i share with my friend, i have 3mbit and he has 1mbit all our IP addresses are public and we have the

I''m trying to build a wan latency test environment, where packets from different "remote" locations get delayed by different amounts of time, depending on which remote location we''re pretending they are from. Currently, I''m doing this using the ''prio'' qdisc to obtain multiple bands, and hanging a different netem qdisc off each of the branches