similar to: IPTables script

As seen on my post at: http://www.sveasoft.com/modules/phpBB2/viewtopic.php?p=28112#28112 This works very well... It does NOT work with stable 4.0! sveasoft will be issuing a bug fix for this (4.1) in the near future. Final Rev of working script w/ asterisk support I'm not going to run alchemy on production machines until it is stablish. Remember to set your uplink properly and to set

Le 26 juil. 07 à 13:55, Georgi Alexandrov a écrit : > Vincent Dautremont wrote: > >> Hi, >> here I have another newcomer question :-) >> in the section 9.6.1 of this how too >> http://tldp.org/HOWTO/Adv-Routing-HOWTO/lartc.qdisc.filters.html >> we can read commands about filters : >> ------------------------------------------ >> >> # tc

I am looking for a good htb traffic shaping script to prioritize incoming traffic over outgoing traffic for my machine. I have a 100mbit line, ftp up, backup data comming in, but whenever mirrors starts grabbing it they use all the traffic and the backup data comming in (the important data) drops to like 300kb/sec. I was thinking some script doing sleep 60 [if downstream > 1mb/sec, limit

Hello, I have problems setting up HTB. This is my setup : NET 1024/256 ADSL || eth1 Linux Firewall eth0 || LAN 10.a.a.a I want to GUARANTEE for an IP (10.x.y.z) a 800kbit bandwidth for HTTP download. But When 10.x.y.z does no HTTP download, other trafic must get the whole bandwidth, of course. The script I use (see below) is quite the same as presented at (the greeeeat page) :

Hi. there is a way to MARK udp VOIP (SIP) traffic, in order to put in a highest prio class ? Traffic flow seems start on udp 5060 port, but next both server and client seems jump to a random(?) port. I can''t use CONNMARK because is udp traffic. I only see a pattern for L7 patch in order to SIP traffic identification , but I run 2.4 kernel series . When you patch 2.4 kernel with

hello, a friend of mine have this configuration: 10 x PC -- router/linux/rh8 -- ADSL Modem -- ISP let''s say that the bandwidth is: 5M and 800K he does dc++ and counter-strike, so let''s say the UP is full, and the ping from the counter server is 300ms, the server cut the connection, and no more game, the player is unhappy. The normal ping is 50ms. so he thinks to put some

Hi All Can someone tell me what am I doing wrong? These was suposed to catch icmp type 8. Why ''match u8'' does not work? # tc filter add dev eth0 protocol ip parent 1: prio 2 \ u32 \ match u16 0x0800 0xffff at -2 \ match u8 8 0xff at 20 \ flowid 1:5 Illegal "match" # # tc filter add dev eth0 protocol ip parent 1: prio 2 \ u32 \ match

Hi, here I have another newcomer question :-) in the section 9.6.1 of this how too http://tldp.org/HOWTO/Adv-Routing-HOWTO/lartc.qdisc.filters.html we can read commands about filters : ------------------------------------------ # tc filter add dev eth0 protocol ip parent 10: prio 1 u32 match \ ip dport 22 0xffff flowid 10:1 # tc filter add dev eth0 protocol ip parent 10: prio 1 u32 match \

Hello, I''m using tc to limit the bandwidth of our wireless customers. I have a working script, but I''m not happy with it. I''m trying to write a more sophisticated script, but when I run it, it give me this error: RTNETLINK answers: File exists I have no idea what this error means or how to fix it. Here is a portion of the script (the whole script shapes several

Hello lartc maintainers and users! I have a router with two NICs. One NIC is connected to the Internet and the other to my internal LAN. I made a script for priorizing interactive traffic. The script matches TOS Minimize-Delay for priorizing interactive trafic, and fwmark for metropolitan packets. I have two root classes (simulating two circuits) : 1:1 for internet and 1:3 for metropolitan.

Hello! I''ve put some questions on this list some weeks ago and I''ve got good answers. Thank you! Now I''ve finished my (beautyful) script and I ran it on my router... About my script: It routes packages based on their destination on the Internet. I have about 1650 preffered destination networks listed in some file. The script read this file and marks every package for

Hey Andreas, how i catch this traffic using L7 filter?, i´ve installed l7 filter now, but i don´t kwnow to use the kind of filter...!!! Can you help me? Thx.- Terraja-based 2007/4/29, lartc-request@mailman.ds9a.nl <lartc-request@mailman.ds9a.nl>: > > Send LARTC mailing list submissions to > lartc@mailman.ds9a.nl > > To subscribe or unsubscribe via the World

I have linux box (does nat and firewall for small network) connected to dsl. I want to set priorities for protocols (that nothing could disturb web browsing). This is my rules (eth0 connected to internet): /sbin/tc qdisc del dev eth0 root /sbin/tc qdisc add dev eth0 root handle 1 htb default 30 r2q 100 /sbin/tc class add dev eth0 parent 1: classid 1:2 htb rate 900Kbit burst 15k /sbin/tc class

Hi, the script below should allow to get ssh connections running well while downloading, but even the 100kbps (100kbyte/s?) doesnt work - can still download with 500+kb/s. Whats wrong? INTERFACE=eth0 #clear all on $INTERFACE tc qdisc del dev $INTERFACE root tc qdisc add dev $INTERFACE root handle 1:0 htb default 15 #root qdics, allows borrowing for its children tc class add dev

Hi, When i do ''wshaper start'' the interface i have defined stops routing traffic for some reason. It resumes routing when i do ''wshaper stop''. I''m using debian stable (3.0 woody) with debian''s default 2.4.18-686 kernel. When I run the script I get no errors, and when I do a ''status'', everything looks correct. Can ANYONE

Hi, I''m having issues with policing my incoming traffic by matching packet marks made by iptables. I''ve checked as many sites and guides as I can find, and I seem to be doing the exact same thing as they all are, but there''s still no success. As such, I was wondering if anyone can have a quick look to see if I''ve done anything obviously stupid? Essentially, I

Hi all, I''ve got a BOX running CentOS 4.5. It acts as a firewall + router. I have installed both iptables and iproute2. I has 3 network cards. eth0 is connected to Internet (is has an internet ip. pls assume its ip is 1.2.3.4/29). it is a 256 Kbit link. eth1 is DMZ. its ip is 192.168.100.254 eth2 is LAN. Its ip is 192.168.101.254 I have alreday shaped traffic to 64 Kbit on eth1 for

Hi, I''m new at traffic control and was reading up on HTB and using it to put an upper limit on traffic. I have a 256k DSL with 64k upload (which translates to about 5/6KB uploads). The machine running the P2P applications keeps filling up the 64K so my browsing from other machines in the network ends up being very slow. Since there are several P2P applications, I wanted to set the

Hi, I have a typical configuration for my firewall/gateway box: single network card, with a pppoe connection to the DSL modem. I''m already successfully shaping the uplink (how come that the wondershaper.htb doesn''t use the ceil parameter? It should implement bandwidth borrowing!) but i found the ingress policy a little bit rough. I''d like to keep the traffic categories

Hi, I found that I had some thinking error with the wshaper script. I assigned the bandwith of my DSL connection to it, but the machine where it runs is normally connected to the LAN with 100Mbit behind a separate Hardware-Router.Obviously, the complete connection of the machine was slowed down to 384k because I told it so.I guess, since wshaper takes only one card as argument, I can''t