similar to: tc/htb QoS script

Hello, I am trying to set up traffic shaping/control for my voip connection. I am running 4.4.22.3. Here is my current configuration: --- tcdevices --- #NUMBER: IN-BANDWITH OUT-BANDWIDTH OPTIONS REDIRECTED #INTERFACE INTERFACES eth1 2048kbps 1500kbps -- tcclasses --- #INTERFACE:CLASS MARK RATE: CEIL PRIORITY OPTIONS # DMAX:UMAX eth1 1 100kbps

Version 3.0.5 with the two-devices setup (eth0 - net, eth1 - loc). Kernel 2.4.29 tcdevices, tcrules, and tcclasses are clones of the wondershaper example (http://www.shorewall.net/traffic_shaping.htm) with eth0 replacing ppp. With TC_ENABLED=Internal in shorewall.conf: ---- Validating /etc/shorewall/tcdevices... Validating /etc/shorewall/tcclasses... ERROR: device A seems not to be

Hi i want see if my QoS are good because i am not very sure ... the VoIP quality are not very good when i download. I have on my Linux routeur/Firewall Asterisk .. and i have into my config : ================================================ tcdevices: eth0 2000kbit 2000kbit tcclasses: eth0 1 100kbit 180kbit 1 tos=0x68/0xfc,tos=0xb8/0xfc eth0 2 full/4 full

I have tried to follow the HOWTO''s as best I could to add some traffic shaping to my existing shorewall firewall/router. What I am trying to achieve Top priority to all voip traffic, regardless of sip, iax2 etc. Higher priority for interactive traffic - ssh, http General queue for everything else, but A low priority queue for any ipp2p traffic What I have achieved..... Almost

Hi, I''m trying to configure QOS , but I''m don''t have success. My files: #/etc/shorewall/tcdevices #INTERFACE IN-BANDWITH OUT-BANDWIDTH eth0 256kbit 256kbit eth1 256kbit 256kbit eth2 256kbit 256kbit #/etc/shorewall/tcclasses #INTERFACE MARK RATE CEIL PRIORITY OPTIONS eth1

Hello, I am trying to block or at least drastically reduced the amount of wasted bandwidth—due to p2p—on a building wide network. My first attempt, was to block it out right. I am running debian etch on my router/proxy/dhcp/dns server. I loaded the ipp2p kernel module and the iptables module. Then I put the following rule in my rules file: SECTION ESTABLISHED REJECT loc net ipp2p:all ipp2p

I stumbled upon a problem while upgrading Ubuntu 13.04, Shorewall version from 4.4.26.1 to 4.5.16.1. Everything was working fine before, after upgrading the script wouldn''t start. First some config files. tcdevices: #INTERFACE IN-BANDWIDTH OUT-BANDWIDTH OPTIONS REDIRECTED eth1 - 6300kbit hfsc,classify ifb0 - 6300kbit hfsc

Hello Shorewall users, I have some questions I am hoping someone can answer. I have searched around the archives but so far I have been unable to find answers. I am trying to configure traffic shaping on my router/firewall box running Shorewall 3.0.5/kernel 2.4.31 and have run into some problems/questions. My basic set up is: 1500/256kbit ADSL (PPPoE/ppp0) -> Shorewall box

I''m experiencing a problem with masquerade downloads saturating my internet connection. I''ve implemented an IFB and now am looking into flow keys. Although I''ve read the documentation, I''m not sure I have this right. Can someone help? /etc/shorewall/params: MID_IF=eth0 MID_IF_TC=1 INET1_IF=eth1 INET1_IF_TC=2 INET1_IFB_IF=ifb0 INET1_IFB_TC=3 Note: MID_IF

Hi, I want to configure QoS in my shorewall conf but I have a doubt. Now I am using tcrules with prerouting and with the file providers, like this. 2:P 192.168.0.11 0.0.0.0/0 tcp 25 So, with this way I route my smtp traffic with my provider number 2. Well, now I want to configure QoS with tcclasses and tcdevices, but if I do that I need to use the MARK in the tcclasses So, how

hi who can ever help me out with the shaping of torrent traffic? i have a pptp at ppp0 over eth0 (10.0.0.1/8) i would like to shape outgoing traffic of rtorrent on these two interfaces, assume rtorrent is running at port 6999 need 3mbit for ppp0 and 50mbit for eth0 i supposed: [tcclasses] ppp0 1 2mbit 3mbit 1 eth0 2 20mbit 50mbit 2 [tcrules] 1 0.0.0.0/0 0.0.0.0/0 tcp

Hello Tom! After i read and analyze some docs about IFB i decide that for implement this feature in Shorewall not need more efforts (of course i may be wrong). If we have 'ifb0' device then we must activate ingress discipline on real device (f.e. eth2) and redirect 'egress' from it to 'ifb0'. tc qdisc add dev eth2 ingress tc filter add dev eth2 parent ffff: protocol ip

I''m trying to use the traffic control features of Shorewall. I share my network with some guys, and I have a tcclasses file like this: #Hunter Fuller eth0 100 1500kbit full 50 tos-maximize-throughput #(other guy''s name) eth0 110 1500kbit full 50 tos-minimize-delay etc., based on their personal preferences. Then

Hello Everyone, We have a standalone Debian Wheezy box for game/web/VoIP server. My problem is that somehow the inbound traffic is limited to 4kbit/s to 8kbit/s by default whereas it''s set to 3*full/10 with 9*full/10 ceiling. The interface is set to 100Mbit/sec and it actually gives that performance with the corresponding outbound traffic limits. Naturally when I stop shorewall this

Hi! It''s me again bothering you guys, what I want to do is to give full bandwidth to VPN traffic and limit the rest to 30KB/s (kilobytespersecond), ok? Here''s what I have: tcclasses ################################## eth0 1 1kbps 70kbps 1 eth0 2 1kbps 30kbps 2 default eth1 3 15kbps 10000kbps 1 eth1 4

Hi, I have this message in my syslog: HTB: quantum of class 10001 is big. Consider r2q change. I don''t know why it''s there. I think all my setup is right. I am shaping traffic from my web server. It lives at three IP addresses, first is fast (and most important - aaa.bbb.ccc.1), second slower (aaa.bbb.ccc.2), third slowest (aaa.bbb.ccc.3). Total bandwidth is 2700kBps. Other

Hey list and possible Arne... I try to get traffic shaping working on my firewall but getting cunfused with settings, but first my current setup: tcclasses file: #INTERFACE MARK RATE CEIL PRIORITY OPTIONS $EXT_IF 10 64kbit full 1 tcp-ack,tos-minimize-delay $EXT_IF 20 full/3 full/2 2 default $EXT_IF 30

Does anyone here implement traffic shaping with shorewall? I need to shape BitTorrent traffic on my network so that upload/downloads do not overwhelm normal function or, even more importantly, my imminent conversion to VOIP for all telephone service. I followed the shorewall documentation guide but am not sure if what I have done is the Right Way Of Doing Things. Nor am I satsified with the

Hi all, This might be more suitable for the shorewall list, but no one has replied yet for several days. I'm trying bandwidth management feature of shorewall-3.4.1-3 on Centos 4.4 with no updates. I've got this error: May 4 22:30:14 gateway shorewall: ERROR: Command "tc qdisc add dev eth0 root handle 1: htb default 13" Failed I've checked the kernel conf (make

I have two boxes for the purpose of testing traffic control and my knowledge thereof (which is at the inkling stage). The boxes are connected by 100Mbit ethernet cards via a switch. For egress traffic via eth0 I achieve a throughput that is close to the specified CEILing, particularly for values above 1mbit. Ingress traffic does not seem so well behaved. Above about 1mbit rates achieved are