similar to: Installing Centos 5 on one system and moving the HD to another....

Hi all, I've recently upgraded a system from CentOS 4.4 to CentOS5, and now when the system boots, the r8169 ethernet card doesn't come up. After the boot sequence, if I type "ifup eth1 | ifup eth1.10 | ifup eth1.203" then the adapter starts up ok. It seems to be something with the boot sequence it loads the ethernet adapters a different way around (ie 4.4 eth0 is now

Me again. The ASUS P5N32-SLI motherboard in my new machine has dual NICs but CentOS has only detected one of them. I've tried rebooting with the network plugged in only to the second one, but kudzu still doesn't find it. Any suggestions?

Hello, I'm currently try to get newhidups running with the newhidups driver from nut 2.0.2. After some USB issues (usb_claim_interface() works only as root so far) newhidups is recognizing the device. Though it doesn't detect any state changes, meaning when I run the battery test mode it's not recognized. I wanted to try the CVS version but it seems anonymous CVS is broken. The

I've go a Compaq Presario (SR5110NX) that I've loaded CentOS 5 on and all is well except for the sound card. I understand that OSS supports the chipset but it's not being detected an loaded properly and I've invested a significant amount of time already. I've probably got an old supported card lying around here somewhere but I hat to give up on the principal. I would rather

I have a newly built drive with 5.2 fresh install (that I will be cloning shortly) in my DECtop and it is failing with X the same way the upgrade from 5.1 drive did (not too supprising there). In 5.1 X worked. I could startx from init 3 and get into GNOME. Also VNC into the box and have a GNOME screen. With 5.2, I get a kernel panic. Well I guess it is a kernel panic because once I run

Hi all, I am having problems to get the SeaLevel IO card to work with CentOS distro. Basically the card is being recognised and shown by lspci BUT /proc/devices file is not updated with the new devices does anyone know why. ? Could someone tell me what/where infos are needed to get /proc/devices to be updated. The reason I require the /proc/devices infos is because I want to run a mknod

I have a bunch of DecTOPs. Use the AMD Geode chip. Yesterday I upgraded one of them, and got the dreaded Kernel panic. Something about powernowk8. I could boot up with the old kernel, though. I know I have to put in a bug report on this, will do shortly, but first wanted to try a fresh install on another DecTOP. At the prompt, I specified: linux askmethod After it loaded the kernel, it

Hello all, I'm going to tackle learning C this week, and start writing my first * add-on/contribution; assuming it's actually worthy of contributing once it's done.. I think I've chosen a hefty project for my first go round here... I'd like to get some feedback from everyone on a FindMe/FollowMe spec I've put together. Before you read on, let me say, I don't want

Hi Gang. I installed CentOS last night and the sound card detection failled to detect the sound card. I have a Asrock K8NF6G-VSTA mother board, with a nVidia NF6100-405 chip set. I have tried various live distro's and I ran Fedora 7 on it for just over 2 weeks and none of them detected the sound card. I'm a newbie to Red Hat based distributions but have been using Mandriva for

Hi Gang. I installed CentOS last night and the sound card detection failled to detect the sound card. I have a Asrock K8NF6G-VSTA mother board, with a nVidia NF6100-405 chip set. I have tried various live distro's and I ran Fedora 7 on it for just over 2 weeks and none of them detected the sound card. I'm a newbie to Red Hat based distributions but have been using Mandriva for

My HP 4010 and the IGP 350M video card. I can only get it to go into 800x600 mode. At one time, Resolution Display (gnome desktop) was giving me an option of 1024x768 and if I selected it the monitor went crazy. Now I don''t even get that higher resolution as an option. I have searched far and wide for information on this card and the Radeon linux driver. No help at all. My

My OQO has a VIA chipset. From the hwconf: class: VIDEO bus: PCI detached: 0 desc: "VIA Technologies, Inc. CX700M2 UniChrome PRO II Graphics" vendorId: 1106 deviceId: 3157 subVendorId: 1106 subDeviceId: 3157 pciType: 1 pcidom: 0 pcibus: 1 pcidev: 0 pcifn: 0 When I install Centos, I default to the vesa driver, and it operates at the monitor's native 800x480. Of course I

The tail of two systems and one hard drive. I install centos 5 on a HD while it is in a Compaq with 256Mb memory. After install, i am in graphics mode (Gnome) and top reports not quite all 256Mb used. Then I move the HD to a decTOP with 512Mb memory. I am running non-graphics (init 3). I ssh into the unit and top reports not quite all of that used..... So what ate up more than 256Mb

I am considering putting together a 'micro server' that I can easily travel with. I am seriously considering the decTOP, as at $99 (plus the cost of a 256MB SIMM) is amazingly priced. But I want to run on batteries, so trash a real hard drive. I have a couple of IDE to Compact flash adapters that support 2 flash cards. So I was considering a 4Gb (or even 2Gb) cheap real fash card

I am looking into convising the boss to get me a mini-itx system to replace my workhorse notebook (I have to have a corp notebook and I can remote terminal into a Centos server from it). So I have been playing with one mini-itx system (the decTOP) and am looking at my options. I want a fast processor, 1Gb memory, LAN, 4USB, VGA. Wireless and bluetooth optional USB dongles along with a

I am installing Centos on a decTOP via ftp, that comes with a generic USB ethernet. I chose the last listed driver some USB ethernet, and the install took off. Got all the way to selecting packages and then it failed. I don't have any SCP stuff to copy the debug too, but it LOOKS like the ftp is failing now. As if the installer lost track of the driver I selected? Well I will try a

I got 4 of those decTOPs (http://www.dataevolution.com/dectop%20info%202.htm) and upgraded the memory to 512Mb. I cannot get Centos 5.0 to install. I have the keyboard mouse attached to an ATEN USB-PS/2 adapter (probably should try without this). I have a USB DVD/CDRW drive. The install CD boots just fine. But then the install says, "No CD" and takes me to Askmethods. So I use

Hello, I have a dual-GPU card GeForce 7950 GX2 (PCI ID 10de:0294). Unfortunately, I cannot make a dump using renouveau, because the program crashes. The backtrace looks like this: Program received signal SIGSEGV, Segmentation fault. 0x00000000004153af in read_fb_ramin (instanceMem=4, offset=2) at objects.c:4089 4089 return fb[((fb_size - (ramin_block*512*1024) + ramin_inst)/4) +

xenconsole fix. reference of tty->count in xencons_close() is racy. It must be protected by tty_sem semaphore like con_close() in drivers/char/vt.c -- yamahata _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel

Well I found a significant source of my problems with these decTOPs. Hardware clock is back at Jan 2006. And many things fail..... And there is no way to access the bios from a boot sequence. On the one I discovered this, I watched everything get errors during all the reboots a Trixbox install goes through. Once I was allowed to log in, I ended using date to set the system date and