similar to: using tc as a function call

hi i tried the example given on the examples page to duplicate selected traffic like tc qdisc add dev eth0 root handle 1: prio tc qdisc add dev eth0 parent 1:3 handle 3: netem duplicate 40% tc filter add dev eth0 protocol ip parent 1:0 prio 3 u32 match ip dst 11.0.2.2 flowid 1:3 when i ping from 11.0.2.2 to this interface my machine hangs. the same thing works for drop or delay. i would

Hi, I am new to kernel programming. My task is to route packets from different hosts through one single token bucket filter as we are trying to model a wireless scenario with many hosts communicating and sharing the same bandwidth.So the idea we came up with was to route packets from different hosts to user space using Netfilter and then send them through a common tbf implemented in user space in

The following (occuring on debian/testing with kernel-image-2.6.8-2-386 version 2.6.8-13 and iproute version 20041019-3) confuses me: # tc qdisc add dev eth0 root handle 1: prio # tc filter add dev eth0 parent 1: proto ip pref 1 handle 1 fw classid 1:2 # tc filter ls dev eth0 filter parent 1: protocol ip pref 1 fw filter parent 1: protocol ip pref 1 fw handle 0x1 classid 1:2 # tc filter del dev

Hi, I am using netem to add loss and then adding another qdisc within netem according to the wiki. Then i want to change the netem drop probability without having to delete the qdisc and recreate it. I try it but I get invalid argument: thorium-ini hedpe # tc qdisc add dev ath0 root handle 1:0 netem drop 1% thorium-ini hedpe # tc qdisc add dev ath0 parent 1:1 handle 10: xcp capacity 54Mbit

I''m trying to setup a netem delay with no luck (using iproute2-2.6.8, compilation broke during arpd compile, so I use the tc binary in the tc/ subdir, there''s also a q_netem.so there). kernel is 2.6.8.1, compile with CPU cycle counter as time reference. I was using sch_delay of 2.6.7 happily with something like: tc qdisc add dev eth0 root 1: delay latency 1ms rate 35M now I use:

I''m trying to use tc and netem to delay packets from several different machines as they exit via eth0. Assume two source IPs, 10.0.0.122 and 10.0.0.133. I''d like to delay packets from the first one by 200ms, and packets from the second one by 300 ms. Any other traffic should be sent out normally. Here''s what I tried: # make three classes, 1:1, 1:2, and 1:3: tc qdisc add

Hi! We want to run TCP streams to several port numbers through one interface, each with a different delay set by Netem. E.g. TCP streams to port 80 could have 50ms delay, while TCP streams to port 81 could have 100 ms delay and so on. We have tried to solve this by using a combination of tc filter and netem rules, but we can''t get it quite right. We are considering one class per port,

Hi all, I''m running some tests with netem and I noticed some strange behaviour that looks like a bug: I''m pinging another machine and adding delay with netem. When I tell netem to give me a 10ms delay, it works fine. The problem is that when I ask for a 11ms delay, it gives me 20ms! It happens for any value between 11ms an 20ms, and it repeats for values over 20ms, now

Hi, I''m trying to set up 15 different delay intervals for packets leaving on an interface, using netems hanging off of a 16-band prio. I''m having trouble adding anything to bands higher than 10. Here''s what I tried: tc qdisc add dev eth0 root handle 1: prio bands 16 \ priomap 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 I want all default traffic to go to

I''m trying to build a wan latency test environment, where packets from different "remote" locations get delayed by different amounts of time, depending on which remote location we''re pretending they are from. Currently, I''m doing this using the ''prio'' qdisc to obtain multiple bands, and hanging a different netem qdisc off each of the branches

There is an design problem with the qdisc interface that causes qlen related bugs in netem, tbf, and other qdisc''s that peek at the top of the queue. The problem is that requeue needs to be called from the dequeue function but requeue can fail. If requeue fails, then the calling qdisc can not properly handle the error. If it returns NULL, then the parent''s expectation about qlen

I am asking this on behalf of the HIPL developers; http://infrahip.hiit.fi/ https://launchpad.net/hipl They have been working on getting their code consistant to the new libnetfilter architecture. Finally have Fedora 18 and 19 available, but have hit a stumbling block with Centos 6. They tell me they are not finding libnetfilter_queue. Here is their message to me: On 08/08/2013 02:03 PM,

Hi All, I am adding ip_queue module for snort inline IDS. I am using snort2.4.0 And iptables-1.3.4. Userspace Queuing(queue target) is enabled. It is built-in and not built as a module. The output of /proc/net/ip_queue is shown below: cat /proc/net/ip_queue> Peer PID : 0 Copy mode : 0 Copy range : 0 Queue length : 0 Queue max. length : 1024 IPTABLES 1.3.4 is

Hi all, I am trying to solve a tiny problem that is trivial to solve using dummynet (FreeBSD). I just want to add a delay of 50ms to each outgoing packet from an interface. This is to simulate a large pool of multiple modem users so I also need to add b/w limits etc (which seems to be easy to do). From the mailing list I could fine 2 qdiscs that can simulate latency : "delay" &

Hi! Do you know somthing about hfsc and bps? There''s no output for speed only for packets. Doesn''t hfsc support such a field? tc -s class show dev eth0 class hfsc 1: root Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) rate 0bit 0pps backlog 0b 0p requeues 0 period 0 level 2 class hfsc 1:11 parent 1:1 sc m1 0bit d 18.0ms m2 1000Kbit ul m1 0bit d 0us m2

I''m trying to simulate a satellite link to a Linux server to test application performance. I haven''t used any of the tc stuff before, but I blandly assured people it would be "easy" to set up a simulated long thin pipe on a spare network interface. However, now that I''m exploring, it''s proving quite difficult. Let me start with the general question

I am thinking of trying centos (I am now using Fedora). Does centos support libipq? Thanks, Mike.

Hi, I am using iproute2 to setup fowarding, adding routes like "ip route add 192.168.1.3 via 192.168.1.2" I was wondering where in the kernel I can insert probabilistic packet loss only for forwarded packets? So that for instance I can drop 5% of all forwarded packets? I don''t need help with the actual code, just need help finding where to insert this code :) Thanks! George

Hello , I am trying to compile ctdb. I pull latest version 2-Jun-2009. During make it fails with error: Compiling utils/ipmux/ipmux.c In file included from /usr/include/linux/netfilter_ipv4/ip_queue.h:10, from /usr/include/libipq.h:37, from utils/ipmux/ipmux.c:31: /usr/include/linux/if.h:59: error: redefinition of `struct ifmap' /usr/include/linux/if.h:77:

On Fri, Sep 29, 2017 at 3:38 PM, Michael S. Tsirkin <mst at redhat.com> wrote: > On Wed, Sep 27, 2017 at 08:25:56PM -0400, Willem de Bruijn wrote: >> From: Willem de Bruijn <willemb at google.com> >> >> Vhost-net has a hard limit on the number of zerocopy skbs in flight. >> When reached, transmission stalls. Stalls cause latency, as well as >>