similar to: How can I block packet between eth0 and eth1?

hello, my name is Denny. I am new in this list. I am trying use multiple uplinks as describe in the lartc documentation (http://lartc.org/howto/lartc.rpdb.multiple-links.html) with squid transparent proxy in my gateway server. let me draw the configuration : /----------------- -----DSL1-----| \ |Transparent proxy |----Local network -----DSL2-----|

I would like to route ssh in my network via DSL2 and all other trafic via DSL1. So far I menaged to do it for LAN2 but there are still WLAN1,LAN3 and LAN1 to go. On all routers I added table "pilicka" with rule for fwmark and I fwmarked ssh. # ip rule show 0: from all lookup local 32765: from all fwmark 0x3 lookup pilicka 32766: from all lookup main 32767: from all lookup

Hi i have read the all the docs and try to deploy the load balance and QoS using my 4 links (DSL links) My setup looks like below LAN ----Local IP-----Connected to Linux Box Eth1 Eth5-- connected to one DSL1 Eth4-- connected to one DSL2 Eth3-- connected to one DSL3 Eth2-- connected to one DSL4 iam marking them in prerouting randomly and puting them in table and snating at POSROUTING

Howdy, Running the most recent OVS and libvirt I'm running into the following error message with virt-install: root at qemu-kvm:~/libvirt-1.0.5#<mailto:root at qemu-kvm:~/libvirt-1.0.5#> ovs-vsctl -V ovs-vsctl (Open vSwitch) 1.11.90 Compiled May 6 2013 22:37:22 root at qemu-kvm:~/libvirt-1.0.5#<mailto:root at qemu-kvm:~/libvirt-1.0.5#> root at

I am working on my Diploma Thesis on Computer Science Engineering. The main idea behind of my work is to make it possible to have a Linux box combining multiple ISP/network connections together providing a single connection with an aggregated bandwith. I have been surfing the Internet and I haven''t found anything like that running on Linux. I would like to implement it using iproute 2

Hi, Below is my Linux firewall network configuration: - eth0 - isp 1, IP: 1.1.1.10, Netmask: 255.255.255.252 eth1 - isp 2, IP: 2.2.2.10, Netmask: 255.255.255.252 eth2 - lan, IP: 172.16.0.254, Netmask: 255.255.255.0 eth3 - dmz, 192.168.0.254, Netmask: 255.255.255.0 isp 1 gateway: 1.1.1.9 isp 2 gateway: 2.2.2.9 Below is my iptables rules: - echo 1 > /proc/sys/net/ipv4/ip_forward iptables

Hi there. I''ve two Internet connections at the same box, one connection is made through ADSL, and another is made with a Radio-Link (WaveLAN IE822). I wan''t to do a backup connection with the ADSL link. With what tools I can do this? ipchains, iptables, a third party tool? -- ____________________________________________________________ PIII 500MHz - 98MB RAM -

Hi, This problem has been tackled over and over, I know. I'm trying to understand why I'm having trouble with my "simple setup". My setup is like this: <SIP_PROVIDER>---<DSL1>---<LINUX_GATEWAY>---<ASTERISK_VIA_DSL1> I've unloaded the nf_*_sip kernel modules from the LINUX_GATEWAY just in case they could interfere. The DSL1 modem/router is a

Hello, I am trying something crazy here. I have gone through the old archives, lartc.org and lot''s of documentation, but still something is wrong. Here is the situation; The server is Fedora core 2 running kernel 2.6.5 I have 2 uplinks to two different ISP''s. (It will be 3-4 in the future). These ISP''s should serve the bandwith to local clients with multiple subnets.

I have two DELL servers with two Ethernet ports in it. Bith servers have CENTOS 4.5 installed. First Ethernet port connect to public Ethernet line and work correctly. Second Ethernet port I connect point-to-point as private Ethernet (cable direct connect without router or switch). Private Ethernet use IP asddress 1.1.1.1 and 1.1.1.2. I check "ifconfig -a" and both eth0 and eth1 are

Very strange and as you suggested delete the ifcfg-eth0 file and recreate, specify your settings. I suspect your wireless device and or systemboard is faulty. Is there a BIOS hardware self-test you could perform to check the integrity of your hardware? On Sun, Feb 9, 2020, at 8:10 AM, Nicolas Kovacs wrote: > Hi, > > I've done my fair share of CentOS 7 installations, but this is the

Hello, Am Sonntag, 9. Februar 2020, 14:10:44 CET schrieb Nicolas Kovacs: > Hi, > > I've done my fair share of CentOS 7 installations, but this is the first > time I have this kind of weird problem. Here goes. > > In my office I have a battered Dell Optiplex 320 PC with two NICs that I'm > using as a bare metal sandbox server for testing purposes. > > The

Le 09/02/2020 ? 14:10, Nicolas Kovacs a ?crit?: > Any suggestions ? I forgot to add. The onboard NIC is a Broadcom card. $ lspci | grep -i net 02:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8100/8101L/8139 PCI Fast Ethernet Adapter (rev 10) 02:09.0 Ethernet controller: Broadcom Inc. and subsidiaries BCM4401-B0 100Base-TX (rev 02) This card gets randomly renamed to either

Le 09/02/2020 ? 16:54, Alexander Dalloz a ?crit?: > "Kernel always uses the ethX naming convention at boot when it enumerates > network devices. Due to parallelization, the order of the kernel interface > enumeration is expected to vary across reboots." Thanks for the heads up. I experimented quite a bit, and found some surprising behavior. So I documented everything in a

Le 10/02/2020 ? 16:12, Leroy Tennison a ?crit : > There may be ways to force NIC naming, I've done so but only on Ubuntu so > you'll need to do the research if it's important to you. Things to look for > based on my experience: 70-persistent-net.rules, net.ifnames=0, > biosdevname=0. That's exactly the solution I described in detail in my blog article. :o) --

hi, = i have my wireless LAN card connected in USB port of linux machine at eth= 1, = = and another wireless LAN card connected to USB port of windows machine. = = the LAN card of windows has been plugged out. now, i want to access the = = internet sites on windows machine through the wireless LAN b/w the 2 = = machines. = I have successfully made a bridge

Hello, I have a routing configuration that I''ve been working on and seems to be working well for me. I''d like to ask for some peer review. If your interested and can take a moment to consider this I could use some advice on if this correct. I''m still very much learning, sorry if this email is off topic or too long or anything. I want to route a wireless network

Hello list, I need to know how to deal with a redundant network with only one asterisk server, which is receiving registrations from the end points on both of its ethernet ports. This means extension 201 is registering both from eth0 and from eth1. Is there a way/software which can act as a middle man between asterisk and the ethernet ports, and by default sends registrations to asterisk only

Hi I want to use two dsl (or more) lines to increase my internet bandwidth. Our dsl lines are dhcp serviced. Both of them provide the same Def GW and different IPs for each ethernet interface (same subnet). ¿Is it possible to balance outgoing traffic "using" the interface as a criteria? No point on choosing gateway by IP. ¿Could someone give me a clue on how to deal with this? (first

Hi Everyone: I installed CentOS 4.4 on a new Dell 2950 using the server cd. No errors during the installation and no errors on bootup when loading the Eth0 or Eth1 interfaces. I currently have iptables stopped and selinux disabled. The interfaces have been given a static ip (192.168.1.x). the subnet is 255.255.255.0 and the gateway is 192.168.1.1. I can not ping any device on my network