similar to: do I need to iptables mark in this scenario?

Hi all, I''m having some problems setting up qdiscs on a bridge.The config looks a little like this: ifconfig ifb0 up # Bring up the IFB for this bridge. tc qdisc add dev eth2 ingress tc qdisc add dev eth3 ingress tc qdisc add dev ifb0 root handle 1:0 cbq bandwidth 100Mbit avpkt 1000 cell 8 # Raw qdiscs on each bridge port tc qdisc add dev eth2 root handle 1:0 cbq bandwidth

Hi, When i do ''wshaper start'' the interface i have defined stops routing traffic for some reason. It resumes routing when i do ''wshaper stop''. I''m using debian stable (3.0 woody) with debian''s default 2.4.18-686 kernel. When I run the script I get no errors, and when I do a ''status'', everything looks correct. Can ANYONE

Hello, I''m using tc to limit the bandwidth of our wireless customers. I have a working script, but I''m not happy with it. I''m trying to write a more sophisticated script, but when I run it, it give me this error: RTNETLINK answers: File exists I have no idea what this error means or how to fix it. Here is a portion of the script (the whole script shapes several

I''ve been following the HOWTO, and reading mailing list discussions about throttling bandwidth, and have had some success, but I just want to tie off some loose ends. Essentially what I am wanting to do is to keep our bandwidth usage below 1megabit, because if we go over we get charged for that traffic. I''ve used some of the examples from the HOWTO to limit our bandwidth, but I

Hi all, I''m having a hell of a time getting my IFB to work. I know I''ve done this before, so I''m missing something stupid. Can anybody tell me what it might be? Configs as follows: -------- #!/bin/sh modprobe ifb numifbs=1000 modprobe act_mirred modprobe 8021q brctl addbr br0 brctl setfd br0 0 brctl stp br0 off brctl addif br0 eth1 brctl addif br0 eth2 ifconfig eth1

Dear List, Sorry for the dublicated email but I couldn''t get any answer. I am trying to limit some IP blocs with tc with following three step. # interface tc qdisc add dev eth0 root handle 1: cbq avpkt 1000 bandwidth 256kbit # class tc class add dev eth0 parent 1: classid 1:1 cbq rate 64kbit \ allot 1500 prio 5 bounded isolated # rules # download tc filter add dev eth0 parent 1:

Hi All, I''m using iptables-1.2.7a on RedHat8 kernel 2.4.20. I wanted to limit the file-sharing traffic to the internet. I marked the packets with iptables: iptables -A FORWARD -t mangle -p tcp -s 192.168.1.1/24 -d ! 192.168.1.1/24 --dport 1024:1862 -j MARK --set-mark 1 iptables -A FORWARD -t mangle -p tcp -s 192.168.1.1/24 -d ! 192.168.1.1/24 --dport 1864:65535 -j MARK --set-mark 1

Hey all, I had asked a question a little while ago about CPU usage being outrageous while using tc and a cbq qdisc. Ed was very kind and offered a few suggestions. One of these was to look at hashing. So after pounding away at it for about a week, I have a general understanding of how it works and have tried to implement it. Unfortunately, and quite obviously since I''m posting here, it

Hi folks, I read the fantastic LARTC How-to and after that i tried to limit one host in my LAN for both down-and upload bandwidth usage. I took section 15.9. and added uplink-limiting as I understood it from the previous chapters. Unfortunately it doesn''t work. I ran the script and went to the specified PC, started a download, and watched the rate. The rate was always about 2000 kbit/s,

Hi, I managed to fix 128kbit for an IP address of 192.168.200.3 as below: - tc qdisc add dev eth3 root handle 1: cbq avpkt 1000 bandwidth 100mbit tc class add dev eth3 parent 1: classid 1:1 cbq rate 128kbit allot 1500 prio 5 bounded isolated tc filter add dev eth3 parent 1: protocol ip prio 16 u32 match ip dst 192.168.200.3 flowid 1:1 tc qdisc add dev eth3 parent 1:1 sfq perturb 10 How can I

Hi everyone, This is on a linux box, ingress (eth1) at 100Mb/s and egress (eth0) at 10Mb/s. The purpose is to test CBQ Here is my script ------------------------------------------------------------------- # Root qdisc tc qdisc add dev eth0 root handle 1:0 cbq bandwidth 9Mbit \ avpkt 1000 cell 8 # Classes tc class add dev eth0 parent 1:0 classid 1:1 cbq bandwidth 9Mbit \ rate 5Mbit weight

OK, finally I have made cbq run ! now I would like to know if it is posible to limit a range of IP to a speed. something like this : from 192.168.1.1 to 192.168.1.21 limit to 128K I don''t whant to limit each IP to 128K, what I would like to do is limit all 20 IP to have a max of 128K. Is it posible?

Hi all, I have installed 2.4.5 kernel, Debian Potato. my tc script: #!/bin/bash tc qdisc add dev eth1 root handle 20: cbq bandwidth 10Mbit avpkt 1000 echo root tc class add dev eth1 parent 20:0 classid 20:1 cbq bandwidth 10Mbit rate \ 10Mbit allot 1514 weight 1Mbit prio 8 maxburst 20 avpkt 1000 echo class tc class add dev eth1 parent 20:1 classid 20:100 cbq bandwidth 10Mbit rate \ 5Mbit allot

Dear all, I''m having real problems getting tc to do anything useful at all. I''m also under pressure to get this fixed before the students start arriving later this month (I work in a university). In short, I want each IP address to be hard limited to 128kbit down, 64kbit up, never to be allowed more bandwidth than this. It is also important that the latency remains

Hi all. Im using the following CQB shaper to shape IP addresses: DEV=eth1 (internal eth) tc qdisc del dev $DEV root tc qdisc add dev $DEV root handle 1: cbq avpkt 1000 bandwidth 100mbit tc class add dev $DEV parent 1: classid 1:1 cbq rate 256kbit allot 1500 prio 5 bounded isolated tc class add dev $DEV parent 1: classid 1:2 cbq rate 512kbit allot 1500 prio 5 bounded isolated tc filter add dev

Hi all. I fear I''m slightly offtopic with this question, but I''ll keep it short: who is (or feels) responsible for the #lartc irc-channel in oftc.net? I''d appreciate if that person would get in contact with me (off-list) in order to discuss some ideas I have. Thanks in advance. Bye, Mike _______________________________________________ LARTC mailing list /

I am using a server with asterisk and I am trying to prioritize voip traffick -- I am a newbie at this traffic shaping, so please bear with me. I used the script below and what happens is thatall traffic in the bulk class stops after a couple of minutes. Also, should I include the ports for rtp in the filter statements with the ports 5061 and 4569? Note I have a fairly big pipe -- supposed to

Hello everyone, I''m a newbie experimenting with CBQ shaping and am facing a few problems. Can any of you please help? TEST SETUP: +---------------+ +----------------+ | 10.0.0.103 |----------->| 10.0.0.102 | +---------------+ +----------------+ 10.0.0.103: Linux, 100Mbit/s NIC 10.0.0.102: Windows, 100Mbit/s NIC, iperf tcp server (ports 2000 and 2001) WHAT I

I have a setup where I have three NIC in a Debian box. I have eth1 conected to internet and eth0 NAT''ed to 192.168.1.1. eth1 and eth2 are bridged together, given ip 192.168.122.2. What I want to achieve is to perform traffic shaping on the bridge as well as prioritizing the traffic from eth0 very low. (This is from trental flat ...) However it seems that I am unable to perform thhe

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi Guys Ive got an internet cafe on which I have a debian sarge box running. The Debian box acts as a gateway and it has masquerading on. I have 40 client PC and i do not want to assign more than 64k per pc for upload and the same is true for download too. Ive done alot of research and Ive read tutorials about CBQ and HTB. I found that CBQ.init is