similar to: Ceil Rate

Hey, I have such a script: tc qdisc add dev $DEV root handle 1:0 htb default 21 r2q 2 tc class add dev $DEV parent 1:0 classid 1:11 htb rate 100mbit tc class add dev $DEV parent 1:11 classid 1:21 htb rate 512kbit ceil 512kbit tc class add dev $DEV parent 1:11 classid 1:23 htb rate 1024kbit ceil 1024kbit tc class add dev $DEV parent 1:11 classid 1:25 htb rate 3072kbit

Hey, one more question for ipp2p iptables -t mangle -A DSL-IN -p tcp -m ipp2p --ipp2p -j CONNMARK --restore-mark iptables -t mangle -A DSL-IN -p tcp -m mark ! --mark 0 -j ACCEPT iptables -t mangle -A DSL-IN -p tcp -m ipp2p --ipp2p -j MARK --set-mark 7 iptables -t mangle -A DSL-IN -p tcp -m ipp2p --ipp2p -j CONNMARK --save-mark iptables -t mangle -A DSL-IN -p udp -m ipp2p --ipp2p -j MARK

Hi, I have a setup like this: class 1:1 rate 7600kbit (on a imq device) | |\class 1:10 rate 100kbit ceil 5600kbit prio 7 (here goes p2p traffic) \class 1:12 rate 7500kbit ceil 7600kbit | |\class 1:121 rate 3100 ceil 7500kbit prio 0 |\class 1:122 rate 2200 ceil 7500kbit prio 2 \class 1:123 rate 2200 ceil 7500kbit prio

Hi, I wanted to implement some QOS on my Linux Box with HTB, but after some time spend on the configuration and tests, I still don''t manage to have some correct results. Here are the details : -ROOT 2000 kbits -HIGHPRIO SUBCLASS 50 kbits prio 0 -SUBCLASS1 750 kbits prio 1 -SERVICE1 250 kbits prio 1

Hello, First of all, I already contacted Martin Devera, the developer of HTB, and he told me to search for help on this mailinglist, thus I am describing my problems here now... I am kind of seriously annoyed by QoS as I have been trying for over 3 years to get it working properly - first I did not understand how it works, then it seemed not to work, then it was working perfectly for half a

Hello I am using htb (krenel 2.6.14.3 + esfq patch from fatooh.org) to limit the bandwidth. But I want the absolute maximum rate to be for example 5Mbit and not to exceed it. here is the script: $tc qdisc add dev ${NETIF} root handle 1 htb r2q 4 $tc class add dev ${NETIF} parent 1: classid 1:21 htb rate 5Mbit ceil 5Mbit $tc class add dev ${NETIF} parent 1:21 classid 1:101 htb rate 2Mbit ceil

Hello, i have a htb setup where the root and (nearly) all child classes has a ceil rate with max up from my adsl line. But the root class don''t reach the ceil value but some childs are get a huge backlog. My setup: (tc -d class show dev ppp0) [cleaned a bit] ******************************************************** class htb 1:1 root rate 576000bit ceil 576000bit burst 30Kb/8 cburst

Hello all, when running tc -s -d class show dev eth, the parent class rate and ceil are different to the configuration? his is the first time I have used HTB so I may have made some basic mistakes. Thanks in advance Shaun Output as follows: class htb 1:1 root rate 760Mbit ceil 760Mbit burst 997641b/8 mpu 0b cburst 997641b/8 mpu 0b level 7 Sent 0 bytes 0 pkts (dropped 0, overlimits 0)

An earlier exchange about someone seeing the rate larger than the ceiling is posted below. Andy explained the reason for the "above ceiling" rate in Daniel''s output . . . but I just saw an example that doesn''t fit. >> tc output >> class htb 1:14 parent 1:1 leaf 14: prio 1 quantum 3072 rate 256000bit ceil 282000bit burst 1820b/8 mpu 0b overhead 0b

Hello all, I am trying to match some conections using u32 but I tryed this: [root@ns1 ~]# tc filter add dev eth1 parent 1:0 protocol ip prio 1 u32 match ip src 0/0 match ip dst 0/0 match ip sport 80 0xffff flowid 1:10 RTNETLINK answers: Invalid argument We have an error talking to the kernel [root@ns1 ~]# I have this class at device eth1: [root@ns1 ~]# tc class show dev eth1 class

Hello! I have an internet connection of 64kbps garanteed in a channel of 256kbps. On this connection the metropolitan speed is 10Mbps and in the provider''s network the speed is 100Mbps. I have a few clients behind my linux box and i want to set up some limitations because some of them are using it irrational. I am marking the packets with 0 for internet; 1 for metropolitan 2 for

Hi! I''m trying to limit the uplink bandwidth using htb but no packets are overlimit or dropped. :-( My router config: * Linux kernel 2.4.20-pre10 (htb v3.7) with everything built as modules in QoS, iptables in use. * tc binary from htb3.6-020525.tgz * external interface eth0: Internet access, 512 kbit/s uplink speed * internal interface eth1: internal LAN, 100 Mbit/s The hosts in the

Hi Stef, Sorry to write to you directly but my list membership is not working, I receive the archive but cant send to the list, cant delete myself because I don''t exist and can''t rejoin as they say I do exist, anyway hope you don''t mind Can you tell me what the difference between these two scripts is please. What I want to achieve is a high speed channel 1000kbit from

Hi all, I am running Slackware 10.1 with Kernel 2.6.14.3 includes iptables 1.3.4 with layer 7 My network diagram below: - INTERNET --- LINUX_ROUTER_FW --- PCs Below is my simple iptables script: - echo 1 > /proc/sys/net/ipv4/ip_forward iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE iptables -t mangle -A POSTROUTING -m layer7 --l7proto applejuice -j MARK --set-mark 1 iptables -t

A bit more detail. I have the following htb classes set up... class htb 1:356 parent 1:4 leaf 356: prio 4 quantum 1600 rate 12800bit ceil 51680bit burst 15Kb/8 mpu 0b overhead 0b cburst 1663b/8 mpu 0b overhead 0b level 0 class htb 1:357 parent 1:4 leaf 357: prio 4 quantum 1600 rate 12800bit ceil 51680bit burst 15Kb/8 mpu 0b overhead 0b cburst 1663b/8 mpu 0b overhead 0b level 0 class htb 1:2 root

Hello I have a 64kbits link to location and I need to limit the traffic of a machine (10.200.0.86) to this location to ensure that this machine will no use all th bandwidth, and I did a rule to this situation where the machine has it bandwith limited to 10kbits if there is other traffic to this location, otherwise it can use up to 54 kbits. tc qdisc add dev eth0 root handle 1: htb ... tc

Hi all, I''ve not been able to find an explanation of the relationship between prio and rate as they apply to the HTB technique. Hopefully someone on here will be able to help me. As I understand things, when prio values are assigned to an HTB setup, classes with a given prio value will only be serviced when there are no packets waiting in classes with a lower prio value. Now, does

Hello! I am using shapping whith htb. My question is what are the propper values I can use in rate/ceil. I use htb.init for quick building of my classes/rules and have 2 groups of clients with 2 different bandwidth assignemet : A. 16--->48kbps B. 16---->128Kbps It seems to work everything OK, but can I use lower values for rate like 8Kbps ? What about using 32-->96Kbps? I let htb to

What''s going on here? I''m spewing UDP traffic at this thing, and it is exceeding the ceil. Anyone know how to fix this? class htb 1:613 parent 1:5 leaf 613: prio 6 quantum 2560 rate 20480bit ceil 103360bit burst 15Kb/8 mpu 0b overhead 0b cburst 1728b/8 mpu 0b overhead 0b level 0 Sent 16591370 bytes 4159 pkt (dropped 39449, overlimits 0 requeues 0) rate 412384bit 6pps backlog 0b

Hi guys I have a config as follows for one of my networks. I want to give the xxx.xxx.xxx.xxx/xx network 64kbit for everything from the internet but 8000kbit from our internal servers on yyy.yyy.yyy.yyy/yy network. It does not work. I only want to use u32 filters. I think what's happening is the first flowid of 1:21 is catching them and not getting to the 1:40 flowid. Is this right? The box