similar to: Load Balancing and NAT Clients Problem

Hi. I´m making an script for load balancing of two cablemodems internet connections toward my LAN. The problem is that when I try to ''equalize'' the the two internet connections with the weight=1 it doesn´t work. On the other hand, if I put 5 and 5 it works, but not at 100%, it does intermittlently, some times works and others don´t. example: ip route add default equalize\

HI All , I am running a FC6 box with two internet links with load balance . Every thing is working fine expect the MSN connection that failed and reconnect every time and SSL connections . I would link to know if with the nona howto I could fix that . I have been tried with no success to redirect that connection only to one link but its look like do not work . Here my configuration :

So after reading the traffic control documentation at shorewall.net I am a little confused. I don''t understand how to use the tcrules file. What I would ideally like to do is setup htb on a per user basis (either by IP or MAC address). If anybody has any hints on the best way to do this or is willing to explain the use of tcrules file a little better (how I could mark it per IP or MAC)

SME Server 6.0.1 as standalone (Domain controler, mail & file server) samba version 2.2.8a I have a win95 machine on my network logged onto the domain with it's d drive shared with full access and no password. On server-manager I have setup a hostname for this machine based on mac address so that the DHCP server gives it the same IP every time. I have created a directory /mnt/win I can

Hi All, I''m using shorewall on my laptop(2 NIC) to connect my desktop to the Internal LAN. For some reason, MS''s SQL query analyser is not able to connect to the SQL server. I alway get the "Server does not exist" I even tried to connect to it using IP address rather than netbios name and it still doesn''t work. All of the access is fine. (eg: WEB/ping etc)

Hi all, Is there any way to automatically update the samba password when a user changes his unix account password using the passwd command. I want samba to look in passwd file for authentication. I dont want to create two accounts one for local unix and then for the samba. I am not planning to deploy ldap as a solution. Is there any workaround. Anish

Hello Im having a problem similar to sawar Here is my configuration --------------eth1---192.168.1.128---------- -------------192.168.1.1 ISP router 1 | my | ---Eth0---192.168.10.157----| | | linux |

Hi, this might be a dumb question, but I''m not finding much information online. I''m trying to setup a 2.6 linux box to run nat across multiple upstream links as a simple way to aggregate bandwidth. I found the instructions in lartc section 4.2 (http://lartc.org/howto/lartc.rpdb.multiple-links.html) fairly clear and straightforward. I implemented those, and a couple of trivial

Hi All, I''m a big user of the LARTC document but am currently stuck with a question around section 4.2 (http://lartc.org/howto/lartc.rpdb.multiple-links.html) in relation to "Routing for multiple uplinks/providers". I''m wanting to do a similar setup to the diagram where I have - lets just say for the moment - two uplink providers where I want to route over two

Hello, I am trying wondershaper-1.1a on a friend''s pppoe connection on her Linux box. There are a few things I don''t understand. 1. She has pppoe connection so should DEV=eth0 or DEV=ppp0 ? 2. Her ISP just says on her payment bill that the speed is 128kbps, but doesn''t mention any downlink/uplink speed, so in that case what should be, DOWNLINK= and UPLINK= ? 3. She

Hi all, I have read and done the LARTC HOW-to and almost everything work''s execpt from the inside network. When load balancing over the two access it only work on the linux router/nat machine 1) I am running stock mandrake kernel 2.6.8.1-12mdk and using stock shorewall config 2.0.8 2) I have two internet link and two internals link. Load balance setup work for the linux router/nat

>In theory yes, but it is shaping inbound transfers to my server. >YOu''re not doing any other sort of Ingress filters are you?? No >I dont care about destination port. That line was commented. BUT, incoming transfers are being shaped for some reason. >Could this be shaping on the ISP side?? What >happens when the tc rules >are shut off?? No, everything works fine

HI all, Im kind of new to this Bandwidth Management thing. I want to ask if this is the right mailing list for me to ask questions regarding TC for bandwidth shapping? Thanks. Grace

Is there a port of this code availble for testing purposes? Thanks john@zavgren.com

Where can I find examples of configs to emulate WANs, I am looking for slow speeds and high latencies. Thanks

Hello, Has anyone had any luck compiling Alexander''s QOS script on a vanilla FC3 or FC2 box? I just cant seem to get the darn thing to port right. Regards, Bryan _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Hi, First time post to list - hope I''ve not messed up on the etiquette! I have a server running in a DMZ behind a wireless ADSL router. I recently implemented wondershaper, which did exactly what it should have, but, of course, knobbled the local bandwidth into the server too, as it''s going via the same (and only) interface. So, I''ve been playing with wondershaper,

what is "tcp window size" ? thank you

Hi, I am using the following script to limit my outbound traffic. This scipt runs on a box behind my firewall. It limits my outbound passive ftp traffic to 39K perfectly....just like i want. However, i just noticed that it is also limiting uploads coming to my server. Is there something I can change to make it not limit uploads to my server? #!/bin/bash #shaping passive ftp traffic # mark the

Hi, Is there a way to do the following with lartc tools : I would like to limit any entering user to not use more than Xkb/mb to my website. The IPs they use are changing all the time so static IP limitation cannot be used. Is there a way doing so ? EC. _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: