similar to: Server and router on the same box

I thought I had this all worked out, but it seems not. The following tc configuration: tc qdisc del dev ppp0 root 2> /dev/null > /dev/null tc qdisc add dev ppp0 root handle 1: tbf rate 120kbit burst 1200 limit 1 tc qdisc add dev ppp0 parent 1:1 handle 2: prio bands 3 tc qdisc add dev ppp0 parent 2:1 handle 10: sfq perturb 20 tc qdisc add dev ppp0 parent 2:2 handle 20: sfq perturb 20 tc

I run a small Linux webserver and NAT router from my cable modem at home. Whenever someone starts an http download, all other traffic from my LAN is starved. Bandwidth is not really an issue, but latency is particularly horrible -- pings that usually come back in 20ms can take up to 600ms while the web server is active! I set up QoS (netfilter+iproute2) on the NAT machine in an attempt to give

Hi all, I have a little problem with my home-made slackware linux server. Here is the scenario: 1. I have a local wifi network 2. my server do masquerading and exit in internet via a PPPoE connection Goals: 1. not use SQUID 2. shaping the traffic with classes 3. emule connection must have minimum priority and a band-limit of 10KBytes/s in uplink (server--->internet) Any idea? Thx, Diego --

hello to all i''m trying to set a filter but doesn''t want to work. i''ve set ut the qdiscs and the classes like this : tc qdisc add dev ppp0 root handle 1: htb default 20 tc class add dev ppp0 parent 1: classid 1:1 htb rate 120kbit tc class add dev ppp0 parent 1:1 classid 1:20 htb rate 30kbit ceil 120kbit tc class add dev ppp0 parent 1:1 classid 1:21 htb rate 30kbit ceil

Hi all, I''ve not been able to find an explanation of the relationship between prio and rate as they apply to the HTB technique. Hopefully someone on here will be able to help me. As I understand things, when prio values are assigned to an HTB setup, classes with a given prio value will only be serviced when there are no packets waiting in classes with a lower prio value. Now, does

Hi, I have done this setup to give the machine 192.168.1.4 (masqueraded over dialup) the highest priority: #! /bin/bash WHAT="add" iptables -A PREROUTING -i eth0 -s 192.168.1.1 -t mangle -j MARK --set-mark 1 iptables -A PREROUTING -i eth0 -s 192.168.1.4 -t mangle -j MARK --set-mark 4 tc qdisc $WHAT dev ppp0 root handle 1: prio bands 3 priomap 0 1 2 tc qdisc $WHAT dev ppp0 parent 1:1

Hi, Sorry to bother you all. I have a typical problem sharing DSL upstream bandwidth with users. I have 3 types of traffic high-priority, medium-priority and low priority. My upstream rate is 960kbits. Traffic (any priority) can vary in bandwidth from 0 to 960kbits. I have a test setup where I can pump 600kbit of high priority sustained and I have 400kbit of low priority traffic sustained. I

Dear all, I''m really a newbie in using ''tc''s class and qdisc concepts. I have a question, for example, when I want to use SFQ, how to assign different weights to different flows? I mean, is there a parameter to be set **in SFQ** to allow some flows to get more bandwidth than others? -- Best Regards, Franklin _______________________________________________ LARTC

Hi all, Im new to all this, and am still trying to get my head qround some of the concepts of how this all works. Ive read the howto''s, man pages etc. Ive setup packet shaping on my router/server box using HTB and SFQ, but its not working the way i would like. Im after shaping that has "weights" for classes so that a lower priority class will slow down when a higher class

Hello everybody, sorry for bothering you, but after some hours, I''m stuck. I''m living in a student''s foundation where I want to connect lots of people to a tiny DSL link. We have exactly four types of traffic. We want a really hard PRIO solution (as I promised to someone that group X will only use the link capacity which isn''t used by group Y). I could make a

I''m trying to setup traffic shaping on my linux gateway/router. The system has 3 interfaces: eth0 - My LAN - with IP address 192.168.0.254 eth1 - The ethernet connection to which my ADSL modem is connected. This has a 10.25.x.x IP, more on this later. The ADSL link has an upstream of ~1.2mbit. ppp0 - The PPP connection which is my WAN connection, with a real world IP. The system acts

Hello, First of all, I already contacted Martin Devera, the developer of HTB, and he told me to search for help on this mailinglist, thus I am describing my problems here now... I am kind of seriously annoyed by QoS as I have been trying for over 3 years to get it working properly - first I did not understand how it works, then it seemed not to work, then it was working perfectly for half a

Hello At first I must tell you that I´m a real newbie with Linux (and english as well...) I´m using 2 vlans and shaping works quite well without vlan Now I want to do load balancing at these vlans. Any vlan should get the same minimum/maximum bandwidth of download and use the bandwidth that isn´t used by the other one at the moment. But with vlan the shaping doesn´t work. Can you please tell me

I try to shape traffic using HTB and mark packets within iptables using PREROUTING. But the filterrules seems to ignore the marks set with PREROUTING Only POSTROUTING marks are accepted. First my configuration I have a router connected to the internet via ADSL over interface ppp0. eth0 is a tunnel to ppp0 and eth1 serves the LAN. LAN is 192.168.57.0/24 on 10Mbit ppp0 is 80.126.16.44 on

Hello, I wrote a simple traffic shaping script (below) that should have allowed me to shape my internet traffic a bit (ppp0 - adsl 128kbit/64kbit; local interface eth0). The script works only partially - the speed is being limited but too much. Without running this script my download rate is about 10kBytes (with second computer also downloading at about 6kBytes). After running it my download speed

Hello! My system is: Internet ADSL(PPPoE) ---> ppp0 [LINUX server(router)] eth0 ---> LAN Server(router) is running on LINUX Slackware 8.1. I have recompiled a 2.4.22 kernel, enabled all QoS support in the kernel config, including HTB. My ADSL bandwidth is 256Kbit/s for download and 64Kbit/s for upload. I use the following HTB+IPTABLES configuration, because I want to reduce bandwith for

Hi all, this is really not really very easy to understand, or, to get in. Well, I''ve the following configuration on the router box: LAN - interface: eth0 - network: 192.168.2.5/24 - bandwidth: 100Mbit/s INET interface - interface: ppp0 - network: .dynamic.ip./0 - bandwidth: DOWN=1536kbit/s and UP=256kbit/s the LAN interface is to serve 6 other clients with internet and

Lartc readers I have a peculiar problem with shaping and firewalling. My tc rules work great, below is a smaller version: #Root tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1: htb default 100 #Root Class tc class add dev eth0 parent 1: classid 1:1 htb rate 1024kbit quantum 20000 burst 15k #Class for each user tc class add dev eth0 parent 1:1 classid 1:2 htb rate 32kbit ceil

Hello, I''m trying to get lossless VoIP traffic over my 3000k/500k ADSL line. Shaping outgoing traffic is no problem: I set total ceil for outgiong device (ppp0) to 450kbit and put VoIP into highest prio class. Even during full upload the voice is clean on the other end. Now I tried to get the same result for incoming data. I attached HTB to eth1 where the incoming voip traffic is

I am looking for a good htb traffic shaping script to prioritize incoming traffic over outgoing traffic for my machine. I have a 100mbit line, ftp up, backup data comming in, but whenever mirrors starts grabbing it they use all the traffic and the backup data comming in (the important data) drops to like 300kb/sec. I was thinking some script doing sleep 60 [if downstream > 1mb/sec, limit