similar to: Diffserv using HTB or PRIO qdiscs as basis for EF phb

Hello, I have the following proplem. My DiffServ configuration is working fine when I do ping, but when I use mgen the packets are not detected at the core router. Here is my core router configuration: #!/bin/bash tc qdisc add dev eth1 handle 1:0 root dsmark indices 64 set_tc_index tc filter add dev eth1 parent 1:0 protocol ip prio 1 tcindex mask 0xfc shift 2 tc qdisc add dev eth1 parent

Im using a Linux machine with standard pc hardware with 3 seperate PCI network interfaces to operate as a DiffServ core router using Linux traffic control. The machine is a P4 2.8ghz, 512mb RAM running fedora core 3 with the 2.6.12.3 kernel. All links and network interfaces are full duplex fast ethernet. IP forwarding is enabled in the kernel. All hosts on the network have their time sychronised

I want to set the DSCP field of the incoming packets. And then put them in the correct queues. I can mark the packets: iptables -A OUTPUT -t mangle -d 10.10.10.12 -j MARK --set-mark 1 tc qdisc add dev eth0 handle 1:0 dsmark indices 64 set_tc_index tc class change dev eth0 classid 1:1 dsmark mask 0x3 value 0xb8 tc filter add dev eth0 parent 1:1 protocol ip prio 1 handle 1 fw

Hello all, Please could someone help me with this, I have been trying for days to get this to work. I would like to have BE, AF & EF classes with HTB qdisc. I can''t find any scripts online where this has been done. If I enable this filter: #tc filter add dev eth0 parent 2:0 protocol ip prio 1 \ #tcindex mask 0xf0 shift 4 pass_on then BE & AF classification seems to be fine but

Hi folks I have created a script file (dsmark+policing.sh attached) to check graphic an text outputs of simutations, against original examples/dsmark+policing coding (see TCNG Reference Manual-pg.90). It uses tcng coding (*.tcsim file attached) and old tc coding (*.tcsim_old file attached) inserted in tcsim files. Observation 1: The graphic outputs from (*.tc included in *.tcsim) and (*.tc_old

hi all i am a new commer of linux community. i want to how does skb->tcindex value change exactly. it confused me indeed. i have a script reads: (1) tc qdisc add dev eth0 root handle 1:0 dsmark indices 64 default_index 0x161 set_tc_index (2) tc filter add dev eth0 parent 1:0 protocol all prio 1 tcindex mask 0xfc shift 2 pass_on (3) tc filter add dev eth0 parent 1:0 prio 1 handle 0x0a

hai all i need to implement CBWFQ in linux As i wrote script in edge as: which mark the EF traffic ____________________________________________________________________-__ #!/bin/sh DEV=eth0 tc qdisc add dev $DEV handle 1: root dsmark indices 8 tc class change dev $DEV classid 1:1 dsmark mask 0x3 value 0xb8 # making two filters tc filter add dev $DEV parent 1:0 prio 4 protocol ip u32 tc

Hi, I am trying to get assured forwarding/expedited forwarding with gred and htb working. Below is the script I am using. The following steps are what I thing is how the script works. My problem is that if I remove the HTB qdisc from the script and have the GREDS parent as the dsmark it works, but when I add the htb as a parent of GRED and DSmark the parent of htb it does not work? Any

Hi, I want to setup core routers to do both DSCP marking and to get the DSCP and forward packets based on DS field. I don''t want to separate DSCP marking to be done only at the edge routers. I know that dsmark is both used for DSCP marking and for getting the DSCP and forwarding packets according to DSCPs. In my case, since I want to do both of these I need two dsmarks.(?) I am not

Hi i have configured my server with cbq and gred. The problem is that the cbq doesnt drop packets. The cbq is configured at a rate of 500Kbit "qdisc cbq 4: rate 500000bit (bounded,isolated) prio no-transmit Sent 100103048 bytes 73933 pkts (dropped 0, overlimits 0) borrowed 0 overactions 0 avgidle 24000 undertime 0 " The traffic that being generated is more than 5Mbit with the

All: I am tasked with creating an environment in which DiffServ and IP precedence is handled as close to RFC specification as possible. I have a few problems with implementing this based on current queueing structure. Here are a few of my questions. 1.) Is there any way to get DiffServ AF drop levels without using DSMARK and GRED? Ex. AF11 Gred DP 1 AF12 Gred DP 2 AF13 Gred DP 3 2.)

Hi all, Supposedly my router is itself streaming traffic to clients. Is it possible for it to mark its packets before going through dsmark?? I have gone through the examples in iproute2/examples, i noticed that there''s always an ingress and egress of which these are 2 different dev. Is it possible for before ingress and egress be the same dev?? I tried the script below but

Hello Mailing list, I have a problem with the prio qdisc and I don´t know what is wrong in my configuration This ist a sample configuration and looks like this: #include "fields.tc" #include "ports.tc" #define X16(i) i i i i i i i i i i i i i i i i dev ppp0 { dsmark { prio(bands 6, priomap X16($be)) { class if ip_proto == IPPROTO_UDP;

I ''m having a problem identical to one encountered on this list awhile back: >I''m trying to configure dsmark qdisc on 2.6.11.4 user mode linux and >tc from iproute2-2.6.11-050314. > > >I think I have some mismatch in my setup since adding dsmark qdisc >fails *unless* I specify "set_tc_index" argument which I believe should >be optional:

I ''ve been trynig for a long time now to make HTB and GRED to work togethen. The problem beeing that GRED doesn''t use handles (instead it uses DP:1 DP:2 etc) i can not preperly filter traffic to them. Tomas Graf suggested to use the tc_index index of u32 classifier so dear Sant .. i am currently with the following scripts that works! But when i try to add an HTB before the

Hi. I did send this to `jaazz@post.cz'', but I suspect the list is a more appropriate/useful place for it. It''s a question about Michal Charvat''s QoS extension to Net-SNMP. When I look at the MIB entries for the QoS handles, I get something like this - enterprises.qos.qosObjectTable.qosObject.qosHandle.0.0 = Gauge32: 0

hi, I''m a beginner with qdiscs and other lartc stuff. After reading the howto and other related documents (i.e. some papers about linux and diffserv), I decided to start with some test. I found some example script to implement simple diffserv using dsmark, but, just after the first command: tc qdisc add dev eth1 handle 1:0 root dsmark indices 64 set_tc_index the system answered:

Hi stef and all I want measure the policy perfomance for video traffic on mpls diffserv network. there are two different polices for video packet 1. Video packets that are marked that are over the limit are to be rejected at the edge router. 2. Video packets that are marked that are over the limit are to be downgraded as best effort and are sent through. Before video enter my mpls

I''m trying to configure dsmark qdisc on 2.6.11.4 user mode linux and tc from iproute2-2.6.11-050314. I think I have some mismatch in my setup since adding dsmark qdisc fails *unless* I specify "set_tc_index" argument which I believe should be optional: # tc qdisc add dev eth1 handle 1:0 root dsmark indices 8 RTNETLINK answers: Invalid argument Mar 20 13:00:50 user user.debug

Hi all! Anyone got the same problem? If I: tc qdisc add dev eth0 handle 1:0 root dsmark indices 4 set_tc_index it works fine. If I: tc qdisc add dev eth0 handle 1:0 root dsmark indices 4 it says: RTNETLINK answers: Invalid argument I just don''t need that set_tc_index stuff for marking. Ferenc __________________________________________________ Do You Yahoo!? Tired of spam?