similar to: strange tc filter behavior

Hello, I have HTB on IMQ device. My rate does not work as I configured. I configured 1920kbit/s and I can download only about 290kbit/s (while it should be the whole bandwidth). My script: /sbin/modprobe imq numdevs=1 /usr/local/sbin/tc qdisc del dev imq0 root 2> /dev/null > /dev/null /usr/local/sbin/tc qdisc del dev imq0 ingress 2> /dev/null > /dev/null /sbin/ifconfig imq0 down

Alejandro, So, i did try the script that you give to me, and the problems its continues.- Maybe the problem was in the IPTABLES rules, i attach the complete script below: ##################### ifconfig imq0 up tc qdisc add dev imq0 handle 1: root htb default 30 tc class add dev imq0 parent 1: classid 1:1 htb rate 500kbit ceil 2000kbit tc class add dev imq0 parent 1:1 classid 1:10 htb rate

Hey Andreas, how i catch this traffic using L7 filter?, i´ve installed l7 filter now, but i don´t kwnow to use the kind of filter...!!! Can you help me? Thx.- Terraja-based 2007/4/29, lartc-request@mailman.ds9a.nl <lartc-request@mailman.ds9a.nl>: > > Send LARTC mailing list submissions to > lartc@mailman.ds9a.nl > > To subscribe or unsubscribe via the World

Hi folks, I`ve a problem to use HTB and SFQ. The first script, below, to show a simple configuration, does work fine...!!! But, in the second example, does not work, becouse i put more code to clasify the traffic by protocol, http and ftp in this case. Somebody can tell me the errors? Thx, in advance.- NOTICE: IMQ device is to asociate with ETH1 my external iface. SCRIPT que funciona:

Hello everyone. CONFIGURATION DESCRIPTION: I have a linux box doing masquerade for two lan''s. Here is a piece of mine network config: eth0 : ISP , one public ip address (DSL modem) eth1 : lan , private network address fe: 192.168.4.0/24 eth2 : wlan access point performing as lan2wlan bridge , private network addes fe. 192.168.67.0/24 This box use 2.6.20 kernel with iptables-1.3.8

Hi I''m moving to hfcs (mostly succesfuly:) ), but I''ve encountered a strange problem: When I download something from this server using wget (one thread) via an idle uplink, I get no more than 130 kbit/s, and when I''m using prozilla (or start more wgets), I get about 200 kbit, but still it''s not all the link can do (240) - the rest remamins unused. Is this

Dear all, I want to make a filter for all IRC-Dalnet traffic, so I want to put all traffic for port 6660, 6661, 6662, 6663, 6664, 6665, 6666, 6667, 6668, 6669, 7000, 7001, 7002, and 8000 to a class. So, I create a TC script as below. I''m sure, it is not effective, and we can write it in simpler. I need help, how to make my script below are simpler. The simpler, the better. Thank you

Hello, I am trying to shape p2p trafik to 256kbps on my dsl line. I wrote this set of commands: DEV=eth2 ip link set imq0 up tc qdisc add dev imq0 root handle 1:0 htb default 21 r2q 2 tc class add dev imq0 parent 1:0 classid 1:1 htb rate 530kbit tc class add dev imq0 parent 1:1 classid 1:20 htb rate 530kbit ceil 530kbit prio 0 tc class add dev imq0 parent 1:1 classid 1:21 htb rate 64kbit

Hi I try setup imq pseudo device for shaping I''m work such script #!/bin/sh TC=/sbin/tc /sbin/modprobe imq numdevs=1 /sbin/ip link set imq0 up $TC qdisc add dev imq0 handle 1: root htb default 1 $TC class add dev imq0 parent 1: classid 1:1 htb rate 10mbit # client1 tunnel tunnel $TC class add dev imq0 parent 1: classid 1:2 htb rate 256kbit $TC filter add dev imq0 protocol ip parent 1:0

Hi, i am running imq + htb on my router , the situation is like this eth0 = uplink to my provider eth1 = 1st customer eth2 = 2nd customer eth3 = 3th customer eth0 has limit 512 and i want to share this between eth1 eth2 and eth3 , but not working , this is the script i used, \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ #!/bin/sh

Hi, I''ve read ADSL-Bandwidth-Management-HOWTO http://www.tldp.org/HOWTO/ADSL-Bandwidth-Management-HOWTO/implementation.htm l#AEN166 and I''ve a doubt from script: [ ... ] # DNS name resolution (small packets) iptables -t mangle -A MYSHAPER-OUT -p udp -j MARK --set-mark 21 [ ... ] That is a bug ? I think that " DNS name resolution (small packets) " is better

Hello to all people there . Can i guarantee ICMP respond time no metter how loaded is internet line . i have typical NATed enviroiment like External IP |linux router| LAN - 192.168.0.0/24 i have example setup with IMQ but is it possible to be done also if i attache htb to eth0 and eth1 for example . if i start shaper ping i better that without shaper but it''s not guarantted i mean

Hello all, I am trying to configure a linux box to make some QoS into my netowork and, at the same box, control my clients bandwidth. I have this classes created: ---------------------------------------------------------------- UP="eth0" # wan infocontabil DL01="eth2" # lan clientes $TC qdisc del dev $DL01 root 2> /dev/null >

I''ve done some tests with TC FILTER and his PRIO and think that is an error or OMISION on TC FILTER DOCUMENTATION from: http://lartc.org/howto/lartc.qdisc.filters.html#AEN1100 Let''s say we have a PRIO qdisc called ''10:'' which contains three classes, and we want to assign all traffic from and to port 22 to the highest priority band, the filters would be:

Hello, I''m trying to get my shaper to work, but have only a partial success. Can someone help me with that. My setup unfortunately is not so trivial, but I think some people could have similar one... 1. There is a router connected to the internet line via interface eth0 2. There are users connected to the router via two interfaces : eth1 and wlan0 3. All users are assigned private IP

sorry for previous post. I have no idea what was the reason :-(. I am sure it was set to ''plain-text'', but I have changed email anyway... ----------------------------------------------- hi there! For weeks I am trying to set my network in such a way: server (linux) is connected through ppp0 to internet. There is MLDonkey running on that and it is also Internet default gateway

I have: tc qdisc add dev imq0 root handle 1: htb default 30 tc class add dev imq0 parent 1: classid 1:1 htb rate 512kbit ceil 512kbit tc class add dev imq0 parent 1:1 classid 1:30 htb rate 64kbit ceil 512kbit then: iptables -t mangle -A PREROUTING -i ppp0 -s 192.168.2.2 -j IMQ --todev 0 tc class add dev imq0 parent 1:1 classid 1:22 htb rate 64kbit ceil 128kbit tc filter add dev imq0 protocol

Hi All, I''m trying to create a contended section of bandwidth using IMQ. I have the imq0 device up and running, with traffic passing through it. Firstly, I need to throttle the entire device imq0 to 2mbit/s. I would then like to add throttle rules for individual IP addresses, allowing them to pass up to 512kbit/s each, as long as imq0 has not reached its 2mbit/s. The configuration

Hello, I have a serious problem with HTB which I wasn''t able to solve myself. I run a masquerading router with ppp0 as interface to the Internet. Three clients need to share a downstream of 1 MBit, which I want to divide with tc. When I see a packet being forwarded to one of these clients, I give it the appropriate unique mark: iptables -t mangle -A FORWARD -d 192.168.34.141 -j MARK

i''m trying to limit my egress bandwidth over 2 interfaces (eth1 and eth2) to 2 Mbit my script is something like this: tc=/sbin/ip ipt=/sbin/iptables $tc class add dev imq0 parent 2: classid 2:4 htb rate 1845Kbit quantum 3000 $tc filter add dev imq0 parent 2: protocol ip handle 4 fw classid 2:4 $tc class add dev imq0 parent 2:4 classid 2:40 htb rate 0.5Mbit quantum 3000 prio 5 $tc qdisc