similar to: tc strange behaviour (some discoveries)

hi all, I''m trying to do the following: tc qdisc add dev eth0 root handle 1: htb default 15 tc class add dev eth0 parent 1:0 classid 1:1 htb rate 1mbit tc class add dev eth0 parent 1:1 classid 1:15 htb rate 512kbit ceil 1mbit what I expect: limit outgoing traffic to 1mbit, start rate is 512kbit and let it grow up to 1mbit (correct me if i''m wrong here) so, here is the problem

Hello I am using htb (krenel 2.6.14.3 + esfq patch from fatooh.org) to limit the bandwidth. But I want the absolute maximum rate to be for example 5Mbit and not to exceed it. here is the script: $tc qdisc add dev ${NETIF} root handle 1 htb r2q 4 $tc class add dev ${NETIF} parent 1: classid 1:21 htb rate 5Mbit ceil 5Mbit $tc class add dev ${NETIF} parent 1:21 classid 1:101 htb rate 2Mbit ceil

Hello i''m having some issues trying to match packets using iptables mark, iproute filter and tc filter.- i mean, when i do iptables -t mangle -A INPUT -p tcp --dport 80 -j MARK --set-mark 20 iptables -t mangle -A PREROUTING -p tcp --dport 25 -j MARK --set-mark 10 iptables -t mangle -A FORWARD -p tcp -i eth0 -o eth1 --dport 25 -j MARK --set-mark 10 $TC qdisc del dev $INET_IFACE root $TC

Dear list, I have the problem that child classes don''t seem to issue the parent class to borrow from their parent. This is a simplified version of my script: tc qdisc del dev $DEV root tc qdisc add dev $DEV root handle 1: htb default 10 tc class add dev $DEV parent 1: classid 1:1 htb rate 10mbit tc class add dev $DEV parent 1:1 classid 1:10 htb rate 1kbit ceil 512kbit #groups tc

Hey, I have such a script: tc qdisc add dev $DEV root handle 1:0 htb default 21 r2q 2 tc class add dev $DEV parent 1:0 classid 1:11 htb rate 100mbit tc class add dev $DEV parent 1:11 classid 1:21 htb rate 512kbit ceil 512kbit tc class add dev $DEV parent 1:11 classid 1:23 htb rate 1024kbit ceil 1024kbit tc class add dev $DEV parent 1:11 classid 1:25 htb rate 3072kbit

I have: tc qdisc add dev imq0 root handle 1: htb default 30 tc class add dev imq0 parent 1: classid 1:1 htb rate 512kbit ceil 512kbit tc class add dev imq0 parent 1:1 classid 1:30 htb rate 64kbit ceil 512kbit then: iptables -t mangle -A PREROUTING -i ppp0 -s 192.168.2.2 -j IMQ --todev 0 tc class add dev imq0 parent 1:1 classid 1:22 htb rate 64kbit ceil 128kbit tc filter add dev imq0 protocol

Hi, Can anyone point me out where the script below is wrong? All I want is that host 172.31.1.1 can only use 10 megabit. If I run this script on the in-between router nothing happens (the host uses still the full 100 mbit, tested with iperf) , so i assume that something must be wrong.... #!/bin/sh # LAN1 NIC tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1: htb tc class add dev

Hi I''m doing traffic shaping with tc on ''10.0.0.0/30'' and ''10.0.0.28/30''. I want to delete part of shaping rules on the fly. (see my configuration at the end of this mail) I wan''t to delete the shaping for ''10.0.0.0/30'' on the fly while still keeping the shaping for part ''10.0.0.28/30'' running. When I for

Hello! I have an internet connection of 64kbps garanteed in a channel of 256kbps. On this connection the metropolitan speed is 10Mbps and in the provider''s network the speed is 100Mbps. I have a few clients behind my linux box and i want to set up some limitations because some of them are using it irrational. I am marking the packets with 0 for internet; 1 for metropolitan 2 for

Hi I have strange problem. same traffic control rules when i started it manual they work OK, but when i started it from crontab / twice per day / doesn''t work correctly ... look like delete rules doesn''t work ... any ideas where to look for problem ? i use debian sarge Linux 2.6 kernel , #!/bin/bash TC=/sbin/tc DEV=eth1 echo "Delete all rules" $TC qdisc

here is the situation i am using htb.init with fwmark to do QoS. i have 2 parent classes with RATE=CEIL which then have some leafs each on his own. the first one works fine (it shapes the packets to the specified rate) class htb 1:21 root rate 1Mbit ceil 1Mbit burst 2909b cburst 2909b Sent 631520262 bytes 651550 pkts (dropped 0, overlimits 0) rate 131573bps 141pps lended: 380595 borrowed: 0

Hello! I need to switch from htb2 to htb3, because of speed issues (for me, htb2 is unable to handle more then 100mbit duplex with ~550 classes), kernel profiling shows htb_dequeue_prio at 1st place with 3x isolation. So, I''ve moved from 2.4.19 to 2.4.25 kernel (hi-pac for classification/marking and htb3 for queueing), and traffic rate drop from 100 to 20mbit. What can be wrong? The

Hi All, I''ve got an interoffice IPSEC VPN in place that I''m trying to give priority to terminal service (tcp 3389) traffic. I''ve created rules at each end, but have hit a bit of a dillemma. As the data is encrypted I must also give highest priority to protocol 50 otherwise the priority is lost as the packet gets encrypted. When I do this however, I can''t

Hello List, I use HTB in a ~80 users serving router with kernel 2.4.20. eth0 is the internet interface (half-duplex 1Mbit), eth1 the internal interface (100Mbit full duplex) cause of the fact that the router also serves as a http-proxy (squid) i thought setting up the default class on eth1 with the real upload-speed (100Mbit) would do the job, i.e. shaping normal stuff to 1Mbit except local

Hello, I use HTB with linux-2.4.20-ac1 and iptables-1.2.7a (pathced for IMQ). I configured one HTB qdisc on an IMQ device. This qdisc has some classes (about 5) and all of the classes has qdisc pfifo. I sometimes got out from my linux (while I was working) and I found in logs: Dec 4 11:49:27 core kernel: HTB init, kernel part version 3.7 Dec 4 11:49:28 core kernel: HTB: quantum of class

The interface is setup like this: # tc qdisc del dev eth0 root # tc qdisc add dev eth0 root handle 1: htb default 2 # tc class add dev eth0 parent 1: classid 1:2 htb rate 20mbit ceil 20mbit If I add a second class and a filter to send traffic to it like this: # tc class add dev eth0 parent 1: classid 1:130 htb rate 1Mbit ceil 1Mbit # tc filter add dev eth0 protocol ip parent 1:0 prio 130 u32

Hello, I have the following proplem. My DiffServ configuration is working fine when I do ping, but when I use mgen the packets are not detected at the core router. Here is my core router configuration: #!/bin/bash tc qdisc add dev eth1 handle 1:0 root dsmark indices 64 set_tc_index tc filter add dev eth1 parent 1:0 protocol ip prio 1 tcindex mask 0xfc shift 2 tc qdisc add dev eth1 parent

Hello, I am new to TC and need some help with something that I need to do I have the following setup which works just fine but with a little problem. I need the user 172.16.1.100 in the case that it is using both classes never to exceed 256kbit now it goes up to 512kbit because both classes offer 256 each. How can I finally restrict this user to only 256kbit no matter what.

i doubt about ruleset in mastershaper demo about why use hfsc at leaf class but inner class use htb??? how different for manage traffic like it???? /bin/false qdisc add dev eth1 handle 1: root htb default 1 /bin/false class add dev eth1 parent 1: classid 1:1 htb rate 2048Kbit ######### Incoming Rules ######### chain HB /bin/false class add dev eth1 parent 1:1 classid 1:21 htb rate 128Kbit ceil

Hi all, I want to allocate bandwidth for ipsec interface using CBQ/tc. Suppose the conf. file is like this, DEVICE=ipsec0,10Mbit,1Mbit RATE=128Kbit WEIGHT=10Kbit PRIO=5 RULE=192.128.1.0/24 Does it work or What else options need to be taken care like ipsec packets/protocol/port # etc.? C''d anybody suggest please? regds, Srikanth. _______________________________________________ LARTC