similar to: tc strange behaviour

hi All, seems like a kernel problem when I do the following on kernel 2.6.12.5 tc qdisc add dev lo root handle 1: htb default 1 tc class add dev lo parent 1: classid 1:1 htb rate 512kbit ceil 1mbit all works as expected (traffic is limited to 1mbit), but this doesn''t work the same way on kernel 2.6.14.3, and actually only ceil has effect (in my previous message I mentioned

Dear list, I have the problem that child classes don''t seem to issue the parent class to borrow from their parent. This is a simplified version of my script: tc qdisc del dev $DEV root tc qdisc add dev $DEV root handle 1: htb default 10 tc class add dev $DEV parent 1: classid 1:1 htb rate 10mbit tc class add dev $DEV parent 1:1 classid 1:10 htb rate 1kbit ceil 512kbit #groups tc

Hi, Can anyone point me out where the script below is wrong? All I want is that host 172.31.1.1 can only use 10 megabit. If I run this script on the in-between router nothing happens (the host uses still the full 100 mbit, tested with iperf) , so i assume that something must be wrong.... #!/bin/sh # LAN1 NIC tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1: htb tc class add dev

Hello i''m having some issues trying to match packets using iptables mark, iproute filter and tc filter.- i mean, when i do iptables -t mangle -A INPUT -p tcp --dport 80 -j MARK --set-mark 20 iptables -t mangle -A PREROUTING -p tcp --dport 25 -j MARK --set-mark 10 iptables -t mangle -A FORWARD -p tcp -i eth0 -o eth1 --dport 25 -j MARK --set-mark 10 $TC qdisc del dev $INET_IFACE root $TC

Hi I have strange problem. same traffic control rules when i started it manual they work OK, but when i started it from crontab / twice per day / doesn''t work correctly ... look like delete rules doesn''t work ... any ideas where to look for problem ? i use debian sarge Linux 2.6 kernel , #!/bin/bash TC=/sbin/tc DEV=eth1 echo "Delete all rules" $TC qdisc

Hello all, I have set my QoS solution and now I am facing a little problem... When I ping to my server it has some lost packages: Estatísticas do Ping para 172.30.0.1: Pacotes: SENDED = 1029, RETURNED = 880, LOST = 149 (14% de perda), Aproximar um número redondo de vezes em milissegundos: Mínimo = 0ms, Máximo = 686ms, Média = 105ms If I disable my QoS ping stats to be ok. I even have

Hi, I''m trying to setup QoS in my TSL box. Following to mailing list reccomendations I changed PSCHED_CPU but can''t get accurate shaping with HTB. I have disabled HYSTERESIS also (by setting it to 0). I have Intel Celeron 1.8Mhz (TSC supported I think). ******** My script ****** tc qdisc add dev eth0 root handle 1: htb default 22 r2q 10 # Class corresponding interface

Hey, I have such a script: tc qdisc add dev $DEV root handle 1:0 htb default 21 r2q 2 tc class add dev $DEV parent 1:0 classid 1:11 htb rate 100mbit tc class add dev $DEV parent 1:11 classid 1:21 htb rate 512kbit ceil 512kbit tc class add dev $DEV parent 1:11 classid 1:23 htb rate 1024kbit ceil 1024kbit tc class add dev $DEV parent 1:11 classid 1:25 htb rate 3072kbit

The interface is setup like this: # tc qdisc del dev eth0 root # tc qdisc add dev eth0 root handle 1: htb default 2 # tc class add dev eth0 parent 1: classid 1:2 htb rate 20mbit ceil 20mbit If I add a second class and a filter to send traffic to it like this: # tc class add dev eth0 parent 1: classid 1:130 htb rate 1Mbit ceil 1Mbit # tc filter add dev eth0 protocol ip parent 1:0 prio 130 u32

Hello all, I am with a doubt about QoS solution... I have a 4 Mbit backbone coming from the telco I use... This is the link I serve to my clients, so I make this classes: $TC qdisc add dev $DL root handle 1: htb default 60 CLASS="/sbin/tc class add dev $DL parent" $CLASS 1: classid 1:1 htb rate 4096Kbit $CLASS 1:1 classid 1:10 htb rate 256Kbit ceil 3072Kbit burst 15k $CLASS 1:1

Hi I have tested with FC3 but iam not able get any good results on that. in the list some one recomend me that > 3.17 HTB should work I saw latest FC4 test2 has the HTB 3.17 with iptables 1.3.0 i have install in my P4 box, and trying to test when iam uploading its working perfect, but when iam downloading its going to default class can some one experinced the same problem below is the my

hello. i have following setup: a machine (winChip 200mhz cpu, 32mb ram, linux 2.4.28) acting like a bridge with 2 interfaces (eth0 - to our ISP, eth1 - to our network) machine does not have any IP there is a 802.1q vlan eth0.2 eth0.2 and eth1 are bridged in br0 i have one 4mbit link which i share with my friend, i have 3mbit and he has 1mbit all our IP addresses are public and we have the

Hi, I''m trying to perform some (what I consider) basic traffic shaping on our network utilising HTB. I have mostly reused the example on the lartc.org site: tc qdisc add dev eth0 root handle 1: htb default 10 tc class add dev eth0 parent 1: classid 1:1 htb rate 100mbit burst 24k tc class add dev eth0 parent 1:1 classid 1:10 htb rate 50mbit ceil 80mbit burst 19k tc class add dev eth0

I have: tc qdisc add dev imq0 root handle 1: htb default 30 tc class add dev imq0 parent 1: classid 1:1 htb rate 512kbit ceil 512kbit tc class add dev imq0 parent 1:1 classid 1:30 htb rate 64kbit ceil 512kbit then: iptables -t mangle -A PREROUTING -i ppp0 -s 192.168.2.2 -j IMQ --todev 0 tc class add dev imq0 parent 1:1 classid 1:22 htb rate 64kbit ceil 128kbit tc filter add dev imq0 protocol

Hello, I have a serious problem with HTB which I wasn''t able to solve myself. I run a masquerading router with ppp0 as interface to the Internet. Three clients need to share a downstream of 1 MBit, which I want to divide with tc. When I see a packet being forwarded to one of these clients, I give it the appropriate unique mark: iptables -t mangle -A FORWARD -d 192.168.34.141 -j MARK

Hi All, I''ve got an interoffice IPSEC VPN in place that I''m trying to give priority to terminal service (tcp 3389) traffic. I''ve created rules at each end, but have hit a bit of a dillemma. As the data is encrypted I must also give highest priority to protocol 50 otherwise the priority is lost as the packet gets encrypted. When I do this however, I can''t

Hi All, I''m trying to create a contended section of bandwidth using IMQ. I have the imq0 device up and running, with traffic passing through it. Firstly, I need to throttle the entire device imq0 to 2mbit/s. I would then like to add throttle rules for individual IP addresses, allowing them to pass up to 512kbit/s each, as long as imq0 has not reached its 2mbit/s. The configuration

Hi Guys, I have a little problem i dont understand why its happening, Initially i thought it was a network problem, but then i made a crossover between me and the server and shaped on that interface with as minimal as possible config this my test: $TC qdisc add dev $INTERFACE root handle 1: htb default 30 $TC class add dev $INTERFACE parent 1: classid 1:1 htb rate 10Mbit # POOL1 $TC class add

Dear list: I have a problem I cannot handle yet, and need to solve it as soon as possible. Would be very greatful with anybody who can help me. I have a 512/512 link to internet, that I want to share between several computers. I have eth0, with a public IP address, conected to Internet, and also, eth1, with a private IP address, for network with the surfing computers. I have a main class with

Hi everybody! I am very glad to get htb test information from www.docum.org for the htb performance. Today, I setup a bridge using brctl. my setup as following: 192.168.2.26 | | | |------------- | HTB+BR box |-------- 192.168.2.18 | eth0 | | eth1 192.168.2.29 | | | I want to limit